Re: HSP and HFP profiles for hands-free telephony

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22.03.19 10:59, Mohammed Sha wrote:
Hi Georg,

Thanks for the quick response.

You should consider using ofono to connect your phone to the PC. It has all the
telephony functions you need and it works well together with PA. See here
for a short introduction:
https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/Bluetooth/

I have tried using ofono for connection, but below error is coming continuously when call is initiated
$ /ofono/test/enable-modem

Bluetooth: hci0 SCO packet for unknown connection handle 0


As already said, I cannot help you much with the bluetooth stack related problems.



This looks like an error from the bluetooth stack, probably pulseaudio
cannot correct it. I experienced problems with some Bluetooth dongles,
have you tried another one?
I havent tried with other module, The Module which i am using is QCA6174A, which will support HFP profile as per documents. 
Do we need to route SCO audio as mentioned on section 5.0 in  https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/Bluetooth ?


Some adapters have issues and need firmware or the correct audio routing.
If firmware is missing there should be something in dmesg.
I think you have to experiment a bit and maybe buy another dongle.

Regards
             Georg

_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss

[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux