> Date: Tue, 26 Sep 2017 22:25:33 +0200 > From: Christian Weinz <christian at madez.de> > To: pulseaudio-discuss at lists.freedesktop.org > Subject: Re: [pulseaudio-discuss] Bass management (Alexander E. > Patrakov) > Message-ID: <1506457533.3747.63.camel at madez.de> > Content-Type: text/plain; charset="UTF-8" > > > Date: Sat, 23 Sep 2017 18:59:58 +0500 > > From: "Alexander E. Patrakov" <patrakov at gmail.com> > > To: General PulseAudio Discussion > > <pulseaudio-discuss at lists.freedesktop.org> > > Subject: Re: [pulseaudio-discuss] Bass management > > Message-ID: > > <CAN_LGv1pGJmPQ7Hr43NOLs8H6YLzO=nk8nLgzK4DExjFV1cSqw at mail.gmail > > .com> > > Content-Type: text/plain; charset="UTF-8" > > > > 2017-09-22 22:12 GMT+05:00 Christian Weinz <christian at madez.de>: > > > Then, however, I had the full-range signal on both my headphones > > > and on > > > the synthesized LFE channel. This means I hear voices in my > > > chair. > > > To > > > prevent that, I set the lfe-crossover frequency, but then I lose > > > the > > > bass in my headphones. Both is bad. > > > > > > > > the headphones and the transducer. In particular, for confirmation > > that there is a significant overlap, which is the necessary > > condition > > to make sure that what we'll design will work not only for your > > hardware. > > The transducer and the headphones do overlap significantly, for > otherwise I would just use the lfe-crossover-freq option. Just a small detail, but, after thinking about it again, I think both using and not using lfe-crossover-freq would solve the problem, but not using lfe-crossover-freq would be preferable because it distorts the signal less.
