Pulse Audio - Bluetooth HFP (HCI Mode) , Audio Quality issue and latency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Vimal,

On Thu, Oct 12, 2017 at 9:08 AM, Vimal Babu <Vimal.Babu at nestgroup.net> wrote:
> Hi,
>
>
>
> The Bluetooth module we are using is BCM4339
>
>
>
> Configuration details
>
> ·         Bluez version is 5.37
>
> ·         Pulseaudio version is -8.0
>
> ·         Bluetooth Chip is in HCI mode
>
>
>
> Steps done
>
> ·         $ bluetoothctl  // scanned, paired, trusted,connected the mobile
> phone to our device
>
> ·         $ pactl list // we can see bluez.source and sink
>
> ·         Using ofono telephony service we have made call to other mobile
>
>
>
> Ring sound started to hear in our local speaker, when we attended the called
> at the receiver end.
>
>
>
> We are facing two issue, they are the following
>
> ·         Bluez.source to alsa sink (local speaker) the sound quality is
> poor.
>
> ·         USB MIC(local mic) to Bluez.sink, we have observed a latency of
> about 30-40 seconds for the audio.

I recall having some issue with buffering but 30-40 is extremely high,
have you tried with another mic or that the only mic available in the
system? Anyway I guess pasting the pulseaudio logs might be useful.

>
>
> What will be the cause of the latency in audio transfer from MIC to
> bluez.sink..? How can we improve audio quality and latency from mic side.
>
>
>
> Please help meâ?¦.
>
>
>
> Regards,
> Vimal Babu
>
> ________________________________
>
> Confidentiality Statement / Disclaimer : This message and any attachments is
> intended for the sole use of the intended recipient. It may contain
> confidential information. Any unauthorized use, dissemination or
> modification is strictly prohibited. If you are not the intended recipient,
> please notify the sender immediately then delete it from all your systems,
> and do not copy, use or print. Internet communications are not secure and it
> is the responsibility of the recipient to make sure that it is
> virus/malicious code exempt.
>
> The company/sender cannot be responsible for any unauthorized alterations or
> modifications made to the contents. If you require any form of confirmation
> of the contents, please contact the company/sender. The company/sender is
> not liable for any errors or omissions in the content of this message.
>
> ________________________________
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
>



-- 
Luiz Augusto von Dentz


[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux