Hello! I'm working with a embedded linux and I'm using gstreamer to talk with other board (voice call). To test and evaluate my project I'm using the IMX6SABRE Dual Lite Board ( http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/i.mx6qp/sabre-board-for-smart-devices-reference-design-based-on-the-i.mx-6-series:RDIMX6SABREBRD ) have the pulseaudio , speex and webrtc installed in my oard, but with my tests I didn't have success with echo cancellation In my testbed I'm using two boards in different rooms, each board has the same softwares, to test the voice call I'm using a script with gstreamer. There's some method to test and evaluate the echo cancellation in embedded environment? Someone has an advice? I'm loading the module-echo-cancel using this command pactl load-module module-echo-cancel source_name=echosource sink_name=echosink aec_method=webrtc sink_master=mastersink source_master=mastersource (I change the webrtc to speex in other tests) The Gstreamer Script (usage ./gstreamer-call.sh ip start) #!/bin/sh IPDEST=$1 case "$2" in start) echo "Starting gstlaunch" gst-launch-1.0 -v \ pulsesrc device="echosource" \ ! alawenc ! rtppcmapay ! udpsink port=4000 host=$IPDEST & gst-launch-1.0 -v udpsrc caps="application/x-rtp,media=(string)audio,clock-rate=(int)8000,encoding-name=(string)PCMA" port=4000 ! \ rtppcmadepay ! alawdec ! audioconvert ! audioresample ! \ pulsesink device="echosink" \ & stop) echo "Stopping gstlaunch" killall gst-launch-1.0 ;; *) echo "Usage: $0 <ipaddress> start|stop" exit 1 ;; esac Thank you very much! Best Regards, Caio Pereira -- ---------------------------------------------- Caio Pereira @caio_rtp -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20160511/d3ca6849/attachment.html>
