Hello, I'm running pulseaudio 8.0 in user mode. Here some logs: > I: [alsa-sink-bcm2835 ALSA] alsa-sink.c: Starting playback. > I: [pulseaudio] sink-input.c: Freeing input 4 "Playback Stream" > I: [pulseaudio] client.c: Freed 0 "GUI" > I: [pulseaudio] protocol-native.c: Connection died. > I: [pulseaudio] core.c: We are idle, quitting... > I: [pulseaudio] main.c: Daemon shutdown initiated. > I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #23). > I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #23). > ... > I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #8). > I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #8). > I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7). > I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.0.analog-stereo" > I: [pulseaudio] source.c: Freeing source 1 "alsa_output.0.analog-stereo.monitor" > I: [pulseaudio] card.c: Freed 1 "alsa_card.0" > I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7). > I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6). > I: [pulseaudio] source.c: Freeing source 0 "alsa_input.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00-Device.analog-mono" > I: [pulseaudio] card.c: Freed 0 "alsa_card.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00-Device" > I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6). > I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5). > I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5). > I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4). > I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4). > ... > I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0). > I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0). > I: [pulseaudio] main.c: Daemon terminated. I attach the configuration files. The daemon is stared by "pulseaudio -D" as normal user. I don't want the daemon is terminated! What's wrong in my config? I set: allow-exit = no exit-idle-time = 0 in daemon.conf, but it seems it's not enough! Thanks Marco -------------- next part -------------- # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/local/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no -------------- next part -------------- # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes allow-exit = no ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 exit-idle-time = 0 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /usr/local/etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 ; resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = yes ; lfe-crossover-freq = 120 ; flat-volumes = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 200000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0 -------------- next part -------------- #!/usr/local/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .nofail ### Load something into the sample cache #load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga #load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga #load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga #load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. ### Load X11 bell module #load-module module-x11-bell sample=x11-bell ### Register ourselves in the X11 session manager #load-module module-x11-xsmp ### Publish connection data in the X11 root window #.ifexists module-x11-publish.so #.nofail #load-module module-x11-publish #.fail #.endif ### Make some devices default #set-default-sink output #set-default-source input -------------- next part -------------- #!/usr/local/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started in system # mode. ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Automatically restore the volume of streams and devices load-module module-stream-restore load-module module-device-restore ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### Enable positioned event sounds load-module module-position-event-sounds
