Yeah, I have phonesim running on 127.0.0.1:9696 and /etc/ofono/phonesim.conf configured to look at that, but no dice. I'll look at it more, I'm not sure how to confirm pulse is talking to ofono properly. Aside that, it seems to me like it would make sense to split the "HSP/HFP" into two distinct HSP and HFP profiles. It's been pretty confusing and as it stands, if pulse cannot support both HSP and HFP at the same time, it should more clearly communicate that and why. I'd like to help any way I can, but I'm not a C dev by any means so a non-trivial patch is out of my reach. J. Leclanche On Sat, Apr 2, 2016 at 10:00 AM, Georg Chini <georg at chini.tk> wrote: > On 02.04.2016 03:38, Jerome Leclanche wrote: >> >> So I compiled pulseaudio with: >> --enable-bluez5 \ >> --enable-bluez5-ofono-headset \ >> --disable-bluez5-native-headset \ >> --disable-hal-compat \ >> --disable-bluez4 >> >> Despite that, I'm still getting: >> W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to >> headset_head_unit: Not connected >> >> A2DP works as expected. HSP/HFP shows as unavailable. ofono is running >> (under systemd - compiled & installed from >> https://aur.archlinux.org/packages/ofono/). >> >> pactl list output for the headset card: >> >> Card #3 >> Name: bluez_card.A0_14_3D_6B_E6_7F >> Driver: module-bluez5-device.c >> Owner Module: 26 >> Properties: >> device.description = "Parrot ZIK 3.0 V3.01" >> device.string = "A0:14:3D:6B:E6:7F" >> device.api = "bluez" >> device.class = "sound" >> device.bus = "bluetooth" >> device.form_factor = "hands-free" >> bluez.path = "/org/bluez/hci0/dev_A0_14_3D_6B_E6_7F" >> bluez.class = "0x240408" >> bluez.alias = "Parrot ZIK 3.0 V3.01" >> device.icon_name = "audio-handsfree-bluetooth" >> device.intended_roles = "phone" >> Profiles: >> a2dp_sink: High Fidelity Playback (A2DP Sink) (sinks: >> 1, sources: 0, priority: 10, available: yes) >> headset_head_unit: Headset Head Unit (HSP/HFP) (sinks: >> 1, sources: 1, priority: 20, available: no) >> off: Off (sinks: 0, sources: 0, priority: 0, available: >> yes) >> Active Profile: a2dp_sink >> Ports: >> handsfree-output: Handsfree (priority: 0, latency >> offset: 0 usec, available) >> Part of profile(s): a2dp_sink, headset_head_unit >> handsfree-input: Handsfree (priority: 0, latency >> offset: 0 usec, not available) >> Part of profile(s): headset_head_unit >> >> Have I missed something? >> J. Leclanche >> >> >> > Are you running ofono? Do you have a modem in your system? > Without modem, ofono will refuse to connect headsets. If you > don't have a modem, you can use the emulator that comes with > ofono. I have been testing this about a year ago. I got to the > point that ofono connected the headset, but it was not visible > in pulse at that time. > Actually you don't need to compile pulse without the native > backend. There is a switch for module-bluetooth-discover, > headset=native/auto/ofono. > > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
