For all who want Pulseaudio with convolving/digital-room-correction: Pulseaudio -> BruteFIR -> ALSA (BruteFIR needs to be the last manipulation in the audio-stream chain) /etc/pulse/default.pa: ------------------------------------------------------------------------------- load-module module-null-sink sink_name=default sink_properties="device.description='Default'" channels=8 channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right set-default-sink default ------------------------------------------------------------------------------- BruteFIR I/O-configuration: ------------------------------------------------------------------------------- input 0,1,2,3,4,5,6,7 { device: "file" { path: "/dev/stdin"; }; # Use STDIN sample: "S32_LE"; # Best sample format supported by soundcard channels: 8; }; output 0,1,2,3,4,5,6,7 { device: "alsa" { device: "hw:<name>,0"; ignore_xrun: true; }; # Direct ALSA hardware access ("hw:"), ignore ALSA I/O-underruns sample: "S32_LE"; # best sample format supported by soundcard channels: 8; # number of open channels / which to use }; ------------------------------------------------------------------------------------ Command-line/start-script: ------------------------------------------------------------------------------------------- pacat --record --device=default --volume=65536 --rate=48000 --format=s32le --channels=8 --channel-map=front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right \ | sudo /usr/bin/brutefir -nodefault <path to BruteFIR configuration-file> ------------------------------------------------------------------------------------------- "--rate=" has to match "sampling_rate" in the global configuration of BruteFIR. "--format=" has to match "sample" and "--channels=" has to match "channels" in the input-configuration of BruteFIR. "--channel-map" defines how to map channels to the input channels (0 - 7). If you're having trouble with ALSA I/O-underruns, try other values for "filter_length" in the BruteFIR global configuration (e.g. 512,128 instead of 65536). Using "module-pipe-sink" instead of "module-null-sink" + "pacat" causes ALSA I/O-underruns, too -- Best regards, Renne