About the first patch:
I tested and refined a patch previously submitted by Takashi
Sakamoto. It seems like nothing has happened on the udev side so I
suggest we take this one for now. In case udev should improve and get a
model database for the Firewire bus, then we could consider
reverting this.
With all three patches, my FireWire device now shows up like I want
it in the GUI.
Before:
Card #2
Name: alsa_card.firewire-0x000a9200c9040125
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "0"
alsa.card_name = "PreSonus FP10"
alsa.long_card_name = "Presonus PreSonus FP10 (id:135, rev:1), GUID 000a9200c9040125 at fw1.0, S400"
alsa.driver_name = "snd_bebob"
device.bus_path = "pci-0000:03:0e.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:0e.0/fw1/fw1.0/sound/card0"
udev.id = "firewire-0x000a9200c9040125"
device.bus = "firewire"
device.vendor.name = "Texas Instruments"
device.product.name = "Motherboard"
device.string = "0"
device.description = "Motherboard"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-firewire"
Profiles:
input:multichannel: Multichannel Input (sinks: 0, sources: 1, priority: 1, available: yes)
output:multichannel: Multichannel Output (sinks: 1, sources: 0, priority: 100, available: yes)
output:multichannel+input:multichannel: Multichannel Output + Multichannel Input (sinks: 1, sources: 1, priority: 101, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:multichannel+input:multichannel
After:
Card #2
Name: alsa_card.firewire-0x000a9200c9040125
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "0"
alsa.card_name = "PreSonus FP10"
alsa.long_card_name = "Presonus PreSonus FP10 (id:135, rev:1), GUID 000a9200c9040125 at fw1.0, S400"
alsa.driver_name = "snd_bebob"
device.bus_path = "pci-0000:03:0e.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:0e.0/fw1/fw1.0/sound/card0"
udev.id = "firewire-0x000a9200c9040125"
device.bus = "firewire"
device.vendor.name = "Presonus"
device.product.name = "PreSonus FP10"
device.string = "0"
device.description = "PreSonus FP10"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-firewire"
Profiles:
input:multichannel2: Multichannel Input (sinks: 0, sources: 1, priority. 1)
output:multichannel: Multichannel Output (sinks: 1, sources: 0, priority. 100)
output:multichannel+input:multichannel2: Multichannel Duplex (sinks: 1, sources: 1, priority. 101)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: output:multichannel+input:multichannel2
Ports:
multichannel-input: Multichannel Input (priority: 0, latency offset: 0 usec)
Part of profile(s): input:multichannel2, output:multichannel+input:multichannel2
multichannel-output: Multichannel Output (priority: 0, latency offset: 0 usec)
Part of profile(s): output:multichannel, output:multichannel+input:multichannel2
David Henningsson (2):
alsa-mixer: Use separate profiles for Multichannel Input/Output
alsa-mixer: Add paths/ports for multichannel profile
Takashi Sakamoto (1):
udev: use ID_MODEL/ID_VENDOR to give friendly name for FireWire
devices
src/modules/alsa/alsa-mixer.c | 6 +++++-
src/modules/alsa/mixer/profile-sets/default.conf | 11 +++++++++++
src/modules/udev-util.c | 11 +++++++----
3 files changed, 23 insertions(+), 5 deletions(-)
--
1.9.1
