-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! Yup, that's right it's 1.0 time at last. So this has been a long time coming, but finally it's out there! I've covered a lot of things already in the previous release notes and we have a fairly extensive summary of things over on the release notes page here: http://pulseaudio.org/wiki/Notes/1.0 So without further ado: http://freedesktop.org/software/pulseaudio/releases/pulseaudio-1.0.tar.xz MD5: 538e0b55ab9ba2987a88047ae332f5f4 SHA1: 24a408e762b2df4334e9ae4f644ac1b893c7ef86 http://freedesktop.org/software/pulseaudio/pavucontrol/pavucontrol-1.0.tar.xz MD5: 0ab6b13542af9b4417438527d2524316 SHA1: 8d18130b3001c0e4d499731b325e16eafd38bbec http://freedesktop.org/software/pulseaudio/paprefs/paprefs-0.9.10.tar.xz MD5: e9130fb1ab5211a50b16f6b63bb6fd49 SHA1: 6b88d5268a070ac8d80224434975af6c9d754e75 (you can also find .gz variants and their corresponding .md5 and .sha1 files if you prefer) I'd like to thank everyone who helped with this release, but particularly thanks go to Arun Raghavan, Tanu Kaskinen, David Henningsson, Maarten Bosmans, Daniel Mack, Jason Newton, Jyri Sarha, Lu Guanqun, Luiz Augusto von Dentz, Marc-Andr? Lureau, Pierre-Louis Bossart, Siarhei Siamashka and of course Lennart Poettering. Thanks also go to everyone else who contributes to PulseAudio in any way, through user support, helping with debugging, aiding testing and all the necessary stuff that goes into a project like this. Thanks also to the good folks over at freedesktop.org for their hosting and infrastructure support. Due to the somewhat strange branch structure, the shortlog for this release had to be manually created. I hope you appreciate the effort this involves (about three minutes work I'll have you know!). So here it is: Antonio Ospite (2): alsa-mixer: Add support for the Microsoft Kinect Sensor device doc: Add info about running pulseaudio from the build dir Antti-Ville Jansson (1): core: Drop empty gaps in the memblockq when playing data from it. Arun Raghavan (149): build: Fix make distcheck cpu: Add CPU information to pa_core echo-cancel: Add SSE optimisation to the adrian module echo-cancel: orc-ify some bits for optimisation build: Copy orc dist files to the correct directory volume: Use a macro to check if a volume is valid volume: Clamp volume to PA_VOLUME_MAX cli: Validate volume before setting pactl: Validate volume before setting volume: Decrease PA_VOLUME_MAX to be < 2^31 volume: Fix incorrect usage of PA_VOLUME_IS_VALID alsa: Sprinkle some PA_UNLIKELYs around error checks build-sys: Fix a warning during distcheck build: Move orc.mak out of build/ build: Simplify Orc-related make rules echo-cancel: Make Orc file names less silly Revert "core: volume ramping fix" Revert "ramping: minor cleanups" Revert "Add volume ramping feature - sink modification" Revert "Add volume ramping feature - sink-input modification" Revert "Add volume ramping feature - envelop fix" Revert "Add new subsystem for applying envelopes (such as volume ramps) to audio signals" Remove remaining ramping/envelope references introspect: Client-side implementation for has_volume/read_only_volume volume: Make tests use only valid volumes volume: Fix sample array size for tests volume: Add Orc-based optimised volume scaling daemon: Fix missing include - cpu-orc.h build: Bump Orc dependency to 0.4.11 cork-on-phone: Handle sink-inputs with NULL sinks bluetooth: Pull a2dp-codecs.h from BlueZ stream-restore: Check for readability before reading volume volume: Get more data from volume tests filter-apply: Make housekeeping optional filter-heuristics: Only apply AEC if we're not already on a phone sink filters: Handle stream moves properly filters: Handle filters on sources as well echo-cancel: Play nice with module-filter-* filter-heuristics: Match roles correctly filter-apply: Mark modules as being autoloaded sink: Trivial typo fix sample: Use PA_SAMPLE_INVALID instead of numeric value core: Add a pa_format_info structure format: Add some properties and internal API sink: Extend API for compressed formats support core: Add extended stream API to support compressed formats format: Add convenience API to check if a format is PCM or not sink: Remove PASSTHROUGH flag tests: Add a trivial test for the extended API sink-input: Minor cleanups sink-input: Return NOTSUPPORTED if format negotiation fails sink-input: Don't assert on bad formats format: Avoid some code duplication sink: Fix leak in pa_sink_check_formats() sink-input: Kill passthrough streams if moving to an unsupported sink core: Fix some FIXMEs for the extended API alsa-mixer: Remove passthrough profiles sink: Trivial typo fix in comment core: Suspend monitor when a sink enters passthrough mode alsa: Reconfigure sink sample rate for passthrough inputs format: Const-ify some parameters format: Add some convenience functions for printing stream: Add API to get a stream's pa_format_info introspect: Get formats for sinks introspect: Get format of sink input format: Add a type for DTS core: Factor out passthrough checks into their own functions filter-apply: Mark modules as being autoloaded echo-cancel: Handle alignment requirement manually echo-cancel: Remove unnecessary noalign attribute sink-input: Don't print an error if a passthrough connection fails sink-input: Don't restore volume for passthrough streams sink-input: Add a format-lost event format: Export pa_format_info_is_compatible in API format: Add correct sample spec conversion for E-AC3 sink-input: Provide more information to client when format is lost format: Extend properties to handle lists/ranges format: Add some convenience API for setting properties doxygen: generate documentation for format.h module-tunnel: Update for recent protocol changes echo-cancel: Don't overpad variable echo-cancel: Remove extraneous debug message format: Fix channel map handling echo-cancel: Add speex preprocessing echo-cancel: Fix a crash is speex cleanup tests: Update extended API test echo-cancel: Fix preprocessor initialisation echo-cancel: More preprocessing fixes protocol-native: Use original requested latency on stream moves protocol-native: Don't leak formats stream: Fix a couple of format_info leaks stream: Simplify passing of formats in extended API source-output: Trivial code move pactl: Add a set-source-output-volume command echo-cancel: Set sane defaults for module initialisation protocol-native: Fix backward compatibility break protocol-native: Fix invalid assert padsp: Handle eol in info callbacks correctly protocol-native: Trivial fix for a compiler warning doc: Document subscription events better log: Add missing pulsecore/thread.h include sink: Add a set_formats() API alsa: Implement get/set_formats() device-restore: Make bools not be bit fields device-restore: Set sink format when possible format: Make pa_format_info_snprint() more parseable format: Add string to pa_format_info conversion function pactl: Add a set-sink-formats command sink: Fix lazy commenting device-restore: Log invalid sink index while setting formats Remind people not to break module-tunnel proplist: Make filter properties line up prettily filter-heuristics: Don't force AEC on all phone streams conf: Load module-filter-* by default build-sys: Bump JACK dependency to 0.117.0 sink: Add a SET_FORMATS flag alsa: Set SET_FORMATS flag when appropriate format: Remove stupid copy-paste-o source: Remove the PA_SOURCE_PASSTHROUGH flag alsa: Don't always suspend/unsuspend on sink-input removal formats: Use correct API to check for passthrough streams alsa: Open iec958 device with NONAUDIO bit set in passthrough mode formats: Fix bad passsthrough check alsa: Fix bad function name daemon: Fix compiler warning about missing function prototype passthrough: We must not plug in a resampler on stream move sink-input: Ensure no volumes are applied for passthrough streams source-output: Ensure no volumes are applied for passthrough streams Revert "device-restore: Make bools not be bit fields" sample-util: Fix off-by-one in error check sink: Add PA_SINK_SET_FORMATS macro build-sys: Fix some LDFLAGS vs. LDADD usage echo-cancel: Add multiple include protection for header echo-cancel: Use pa_streq instead of strcmp echo-cancel: Move speex preprocessing out of the main module passthrough: Fix what volume we set sinks/sources to passthrough: Fix setting volume to unamplified again echo-cancel: Make save_aec modarg a bool instead of an int echo-cancel: Don't allow streams to attach while unloading echo-cancel: Get rid of annoying compiler warnings equalizer: Comment out unused function vala: Add has_type_id=false to all enums, structs and classes stream: Relax assert for extended API def: Hide server-side sink/source flags volume: Handle varying channel count for shared volumes virtual: Make volume sharing on by default equalizer: Use volume sharing by default echo-cancel: Use volume sharing by default sink,source: Handle missing in the shared volume case Bart Cerneels (2): echo-cancel: Speex preprocessor has to run *after* the AEC. echo-cancel: Fix echo suppression, add some knobs Bryan Gleeson (1): raop: Change socket buffer size handling to avoid playback underruns Cai Yuanqing (2): coreaudio: Make coreaudio-detect safer by adding asserts before dereferencing loopback: Add new arguments to disable stream move Cheng-Chia Tseng (4): l10n: Updates to Chinese (Taiwan) (zh_TW) translation l10n: Updates to Chinese (Taiwan) (zh_TW) translation l10n: Updates to Chinese (Taiwan) (zh_TW) translation l10n: Updates to Chinese (Taiwan) (zh_TW) translation Colin Guthrie (100): stream-restore: Preventative initialistion to NULL pacat: Don't use any buffer attr if we don't set any latency/process time params cli: Allow .include on directories as well as files. introspect: Include whether a stream is corked in the info callback. log: Totally trivial spelling 'correction' (for en-US) dbus: Fix log message after volume changes. version: Drop the micro version number doxygen: Fix version numbers for new features build-sys: Add some smarts to version extraction from git tags. volume: Trivial cosmetics (remove a space) Revert "core: make use of dbus_message_iter_append_fixed_array" core: Add a new hook PA_CORE_HOOK_CARD_PROFILE_CHANGED x11: Make pax11publish -r remove PULSE_SESSION_ID alsa-mixer: Fix a git-am cockup in b0f72311 cork-on-phone: Only cork (and subsequently uncork) streams that are not already corked. build-sys: No need to create folder for echo-cancel module. bluetooth: Fix build errors relating to SBC build-sys: Whitespace changes build-sys: Fix bluetooth update-sbc now that it's in a subfolder. build-sys: Make update-sbc, update-reserve and update-rtkit work in OOT builds bluetooth: Run 'make update-sbc' tunnel: Fix tunnel streams with recent servers echo-cancel: Fix warning/typo daemon: Fix regression with --start introduced with the double fork in 8e94f653 po: Remove files no longer in the tree (and which didn't have any translations anyway). daemon: Fix some more error paths in the double forking. daemon: Fix regression introduced in f1d1447e. dbus: Do not refcnt the core. bluetooth: Fix a double-free-esque error introduced in 8f3ef04b doc: Fix typo equalizer: Use sink_master as the module argument rather than just master. filter-apply: New module to automatically load filter sinks (and move streams) based on sink-input property hints. filter-heuristics: New module that applies some basic heuristics regarding filters. filter: Move the proplist defines into the central place and document them. test: Make the connect-stress less likely to bail out due to >32 streams. combine: Rename module-combine to module-combine-sink. tests: Fix resampler-test. i18n: Fix POTFILES bluetooth: Fix early return styling and add missing return value sink-input: Fix memory leak of proplist when sending format-changed events protocol-native: Fix memory leaks introduced in protocol 21 (passthrough support) pulsecore: Add a couple pa_asserts() on pa_tagstruct* calls. combine: Fix a crash on shutdown if the module is loaded outside of our control. build-sys: module-equalizer-sink needs dbus. alsa-sink: Some trivial tidyups introspect: Clear out memory properly on error. def: Add some flags for source outputs. capture: Add the passthrough format negotiation to capture streams. introspect: Get formats for sources capture: Implement per-stream volume control for capture streams. introspect: Get format of source output alsa: Remove unneeded include streams: Tidy up includes alsa-mixer: When setting hw volume, always round up with playback and down with capture. capture: Remove support for synchronised capture streams. esound,streams: Fix some crashes. database: Convert our use of database files to save in tagstruct format. device-restore: Add a new protocol extension for device-restore. database: Support legacy format database entries. alsa-mixer: Add an mixer profile exception for a BT Agile handset alsa-mixer: Add UAC1.0 Sennheiser Dongle to the usb-headset profile. alsa-mixer: Whoops, forgot to git-add this in a previous. build-sys: equalizer-sink needs DBus aswell as FFTW devices: Use wrapper functions to set the *_volume and *_mute callbacks. devices: Set certain sink/source flags automatically. alsa: Reinitialise the mixer on port change. alsa-mixer: Do not 'unify' mixer paths. alsa-mixer: Detect and then drop pointless paths in the path set. alsa: No need to go via sink/source to get the core. alsa-mixer: Remove workaround for USB head/handsets reserve: Fix compile warning when compiling without dbus source-output: Fix resampling. stream-restore: Save/restore source output volume/mute device-restore: Various fixes for the protocol extension. pactl: Make stat backwards compatible with previous versions. alsa-mixer: Fix rounding direction on mixer initialisation alsa: Ensure that volumes are written to the h/w at startup. ext-device-restore: Include format.h sink-input: Drop redundant assert (PA_SINK_INPUT_IS_LINKED() checked already) core: Unload the modules and cached samples before unref'ing the core. def: Add a new enum to allow differntiation between sinks and sources. dbus: Use pa_device_type_t rather than an internal equivalent device-restore: Change the API to include type information (sink vs. source) device-restore: Split device restore database into two parts. device-restore: Restore volumes on port change. device-restore: Simplify the migration of data to per-port keys. stream-restore: Add in some variable sets that were missing from 9ffa93. stream-restore: Add proper data validity checks to the legacy database entry read. formats: The format code should be in libpulse, not libpulsecommon formats: Export more functions needed for a clean build. device-restore: Fix use-after-free error. raop: Use the port supplied by avahi when connecting to RAOP devices. bluetooth: Bump DBus version to 1.3.0 and drop conditional code. alsa: Tidy up argument descriptions modargs: Ensure modargs can be accessed in their raw form. raop: Properly deal with the name coming from the device. build-sys: Oops forgot to add the Kinect profile to the build system. volume: Rename 'sync volume' to 'deferred volume'. doc: Update README with fresh links. build-sys: Switch to the tar-ustar format (as per a lot of GNOME stuff for 3.2) and distribute .xz files. Daniel Mack (34): make bootstrap.sh aware of Darwin environment Revert "make bootstrap.sh aware of Darwin environment" buil-sys: fix build w/o DBus Wrap clock_gettime and friends Mac OS X: add semaphore implementation configure.ac: enable check for CoreAudio core-rtclock.c: tweak OS_IS_DARWIN constraints poll() is totally broken on Mac OS X hack around another OS X bug: recv() with MSG_PEEK does not work CoreAudio: add device detection module CoreAudio: add audio device module osx: add native zeroconf implementation via Bonjour fix a number of warnings fix a number of warnings osx: don't build the once-test binary on OS X modules/coreaudio: replace deprecated functions module-bonjour-publish: don't include avahi headers alsa: Add two more ALSA audio card profiles module-coreaudio-detect: fix variable assignment in pa__done() osx: re-order module locations osx: add -headerpad_max_install_names to LDFLAGS configure.ac: add --mac-universal directive for OS X osx: add routines for real-time thread scheduling tests: add a connection stress test pa_poll(): Simplify detection of invalid fds in select() emulation mode module-coreaudio-detect: Add 'ioproc_frames' parameter util: Implement pa_get_binary_name() for Mac OS X pulsecore:: Define _POSIX_C_SOURCE locally for rtclock on OSX thread-posix: Use pthread_(get|set)name_np() if available module-coreaudio-device: Dispatch sink/source state messages from main loop module-coreaudio-device: Set the thread name to device name module-coreaudio-device: Fix two build warnings build-sys: Make -isysroot and -mmacosx-version-min configurable osx: pass -headerpad_max_install_names to the linker, too Daniel Schaal (1): man: add manpage for start-pulseaudio-kde and start-pulseaudio-x11 Daniel T Chen (2): build-sys: Add missing profile and alsa-mixer/paths to src/Makefile.am alsa: Handle 'Digital Mic' as an 'Input Source' David Henningsson (25): alsa-mixer: Add a few well-known descriptions alsa-mixer: add required-any and required-* for enum options alsa-mixer: always round towards 0 dB alsa-mixer: Add new paths for Internal Mic, Front Mic, Rear Mic and Dock Mic alsa-mixer: Fixup "Mic"/"Line"/"analog-input" paths to work with the new paths alsa-mixer: Make sure capture source and input source use right path alsa-mixer: Add support for "Line Boost" element alsa-mixer: Add workaround for some USB headsets protocol-native: Allow clients to know at what index underrun occurred Fix crash in path subset elimination Document PA_COMMAND_UNDERFLOW protocol change alsa-mixer: Mute IEC958 optical raw for several Audigy models alsa-mixer: Add "Line HP Swap" element JACK: Load module-jackdbus-detect in default.pa Remove offensive part of error message switch-on-connect: Don't switch to a monitor source Fix spelling sucess -> success Set better priorities on input paths module-switch-on-connect: Don't switch unlinked sink input and source outputs alsa-mixer: Set "Front" control to 0 dB on headphone path raop: Don't crash if fd is not open when trying to close it sink,source: Avoid crash by not updating volume on shutdown conf: Make sure module-dbus-protocol is loaded after module-default-device-restore dbus: Don't crash if the module does not load Fix crash in threaded message queues Diego Elio Petten? (12): Fix out-of-tree builds when dbus module is enabled. Add check for FFTW, and add option to disable it at build-time. Move the platform-specific defines after the compiler has been found. Fix build on Solaris: pass the third parameter to pa_cloexec_open. Don't declare the variable l if FIONREAD is not defined. Include sys/filio.h if present; this makes use of FIONREAD on Solaris. Check for stow using AC_CHECK_PROG rather than type -p. Simplify handling of NetBSD atomic ops discovery. Since now we have FreeBSD atomic operations, don't require libatomic_ops. Rename all the signal parameters and variables to something more explicit. Avoid using devname as a variable name. Simplify Makefile.am handling of ALSA-related files. Dimitris Glezos (1): l10n: Updates to Greek (el) translation Edward Rudd (3): coreaudio: Fix call to pa_thread_new solaris: update call of pa_thread_new to new prototype sconv_sse: Exclude SSE optimizations for Mac OS X Fritz Elfert (1): Disable check for pthreads on win32 Gustavo F. Padovan (1): sbc: Fix redundant null check on calling free() Harri M?h?nen (1): stream-restore: add version to new entry. Henning Heinold (2): src/Makefile.am: add missing space to fix build using uClibc build-sys: look for function 'backtrace' also in library 'ubacktrace' Jason Newton (48): module-equalizer-sink added src/Makefile.am: added module-equalizer-sink module-equalizer-sink: added temporary debugging output to track filter output removed dead code only a small amount of crackling remains module-equalizer-sink: added more assertions to aid in debugging module-equalizer-sink: attempt different buffering strategy module-equalizer-sink: trying new buffering strategies module-equalizer-sink: simplified sink_input pop callback and introduced new variables that simplify different strategies. module-equalizer-sink: first commit of a working state (cpu speed dependant) added noop processing for filter debugability module-equalizer-sink: removed liboil added sse2 optimized dsp logic implementation cleaned up a bit module-equalizer-sink: added dbus support removed cruft from inherited from ladspa module and improved clarity switched dsp processing to reference implementation until project is more mature tsched=0 seems to help with the micro-dropouts/crackling! oh my! reformatting/spaces module-equalizer-sink: added support for suspend/resume of filter coefficients unregister the correct dbus interface. made equalizer state file sink index dependent expanded dbus properties whitespace module-equalizer-sink: dbus properties and manager so that multiple sinks can be loaded and mixers can be equalizer-sink aware functionality to seed new filters quickly (rteq guis) profile support extra checking in client->server dbus messages module-equalizer-sink: add lennard's fix for piggy-back sinks in pop_cb fixed some tsched issues module-equalizer-sink: reverted buffering logic back to how the ladspa sink did it module-equalizer-sink: dbus: eliminated some redundant code in dbus handlers/getall switched filter back to being a property signals for changed profiles, added/removed sinks, filter updates and sink reconfigurations fixed timing routines module-equalizer-sink: proper fix for pa_xmalloc(0) given that 0 is illegal fix coefficients in case there's no resume state loadprofile now signals filterchanged module-equalizer-sink: fix for peek returning a null memblock pa_log -> pa_log_debug for fft size updated module description fixed a comment in dbus error for incorrect x positions module-equalizer-sink: reworked processing so we don't have input->output delay of R samples module-equalizer-sink: merging in upstream changes whitespace fix and fix for first iteration un-windowing module-equalizer-sink exchanged improper usage of memblockq_peek'd memchunk for silence block dropped unneeded function prototypes changed mround to be slightly more elegant __restrict__ -> restrict for c99 removed unneeded pa_aupdate_swap calls first_iteration -> pa_bool_t cleaned up some usage of pa_malloc0 where pa_new0 was more appropriate cruft removal, whitespace fixes and reordering of variables module-equalizer-sink.c i->sink -> i in pa_get_sink_max_request* module-equalizer-sink.c: swapped order of attach_within_thread and set_max_request within sink_input_attach_cb module-equalizer-sink: fixed timeval initialization module-equalizer-sink: drop old macros for new library based ones module-equalizer-sink: added support for preamp module-equalizer-sink: fixed a bug w/ new zero-latency input scheme (that was an interesting/cool bug!) module-equalizer-sink: per-channel filtering support + profiles, easier default configuration module-equalizer-sink: added server side persistance of profile names module-equalizer-sink: fix improper usage of pa_modargs_get_value_boolean for u->set_default module-equalizer-sink: resync with ladspa parent sink module-equalizer-sink: resyncing with head and fix invalid writes * pa_log->debug for default equalizer notification * partially fixed infinite rewind bug * set max_request to window_size first iteration * swap order inside ROUND_UP calls * resync pa_sink_input_new changes * change pa_sample_clamp parameters to be correct to fix invalid writes * reenable proper reset logic + proper request size module-equalizer-sink: *added client initiated sync support for filter state *added note of possible unstable behavior with next-power-of-2 sample rate calculation module-equalizer-sink: disable active profile name restoration as something in pack/unpack is funky and I don't have time for a proper fix module-equalizer-sink: fixed equalizer state save/restore module-equalizer-sink: *fixed SSE2 optimized dsp logic (default if available) *cleaned up whitespace formatting (again) module-equalizer-sink: drop source executable permissions configure.ac: add enable/disable + summary line for fftw module-equalizer-sink: fixed equalizer state save/restore module-equalizer-sink: *fixed SSE2 optimized dsp logic (default if available) *cleaned up whitespace formatting (again) module-equalizer-sink: drop source executable permissions configure.ac: add enable/disable + summary line for fftw drop redundant alloc call module-equalizer-sink: try to limit buffering to mempool's max_block_size and disable debug output module-equalizer-sink: add premultipliar to sse2 dsp_logic implementation module-equalizer-sink: (re)added output memblockq commented out timing debug statements module-equalizer-sink: switch back to reference dsp implementation - cpu usage doesn't really change and there may be a bug in the vectorized version module-equalizer-sink: add latency of output_q and input_q to get latency calculation added qpaeq script for GUI equalizer control to src/util remove .py extension from qpaeq Makefile.am: added qpaeq to installed scripts src/utils/qpaeq: added more friendly error messages to common errors Jens Georg (2): rygel: Properly close {sv} iters for GetAll rygel: Fix introspection XML for MediaItem2 Joe Marcus Clarke (2): freebsd: fix atomic ops implementations freebsd: implement pa_get_binary_name Jonny Lamb (2): introspect: fix source output and sink input docs mix-up introspect: fix typo in default sink/source docs Jo?o Paulo Rechi Vita (2): bluetooth: improve dbus logging bluetooth: add HFP Gateway support Juho H?m?l?inen (3): alsa-sink: take base volume into account when applying hw volume bluetooth-device: fix rounding errors caused by few bt volume steps alsa-mixer: select nearest alsa volume step in sync-volume mode Jyri Sarha (15): core: Add infrastructure for synchronizing HW and SW volume changes alsa: Take syncronized HW volume infra into use for alsa-sink udev-detect: Add sync_volume parameter daemon-conf: Add sync volume parameters to daemon-conf man: sync_volume parameters to manual page core: New LIFO style flist implementation v2.2 core: Lower "flist is full" log message level to debug and ratelimit it core: Add name to flist struct for more informative log messages core: Change sematics of pa_flist_new_with_name() (v1.1) core: Use volume_change_safety_margin when rewinding sync-volume events core: Use pa_sink_get_latency_within_thread() in sync-volume code alsa-sink: Fix double use of string alsa-sink: Don't assume we were able to enable hw-volume or sync-volume (v1.1) protocol-native: Stop auto timing updates if connected to suspended sink or source suspend-on-idle: Trigger mempool vacuuming Kim Lester (2): configure.ac: add DARWIN_OS variable src/Makefile.am: add specific OS_IS_DARWIN files Kim Therkelsen (2): Support for multichannel DSP processing in module-ladspa-sink core: Added new hooks: PA_CORE_HOOK_SOURCE_PORT_CHANGED and PA_CORE_HOOK_SINK_PORT_CHANGED Kurt Taylor (1): PulseAudio: added IT block to fix thumb conditional instruction build error messages Lennart Poettering (41): memblock: decrease tile size to 64k again libpulse: introduce pa_context_get_tile_size() call clients: drop definition of BUFSIZE which is unused pactl: include information about client context in pactl stat output pactl: format cookie a little bit nicer libpulse: introduce PA_STREAM_RELATIVE_VOLUME smoother: add comments about optimization recommendations from Jason Newton simd: update test cases core-util: introduce FD_CLOEXEC wrappers for open/socket/pipe/accept use cloexec wrappers wherever applicable core-util: make sure to enable FD_CLOEXEC unconditionally to cope with kernels that silently accept but ignore O_CLOEXEC core-util: introduce pa_fopen_cloexec() tdb: use O_CLOEXEC if available use pa_fopen_cloexec() where applicable socket-util: allocate at least sizeof(sockaddr_storage) space socket-util: drop redundant casts git: ignore kde related files daemon: make sure pa has its own session and process group, but is not its leader so that we cannot acquire a tty ever ramping: minor cleanups pulse: ask for timing updates both *before* and *after* triggering a stream state change so that in the STARTED/UNDERFLOW callbacks we accurate transport latency information tests: add pa_once_xxx() test client: introduce auto-connect-localhost= option in client.conf client: introduce auto-connect-display= following the scheme of auto-connect-localhost= native: fallback to another port if the default port is taken native: when run in system mode, do not look for fallback port start: we don't need to check for $PULSE_SERVER anymore shm: explicitly mark shm seg for MAP_NORESERVE to request overcommiting no matter what pactl: implement pactl subscribe Revert "pacat: Don't use any buffer attr if we don't set any latency/process time params" build-sys: fix check for pthread_setaffinity_np() i18n: update LINGUAS i18n: run make update-po conf-parser: make use of pa_strip() wherever applicable iochannel: remove fd from poll() when we don't care from events various modernizations equalizer: various smaller cleanups for m-e-s virtual: minor simplifications for the virtual sink virtual: document how to implement fixed block size filters virtual: when fixed block sizes are used the memblockq must have a silence block tests: fix once test memblockq: decode unset chunks as NULL chunks again Leonid Kurbatov (13): l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation Leszek Koltunski (1): X11: attach X11 properties to Screen, not Display Lu Guanqun (7): alsa-mixer: Fix the assumption that volume is always positive log: add thread name sample-util: use built-in function i18n: po file fixes memblock: fix memory leak when pa_shm_create_rw fails memblock: use built-in function pacat: make pacat respond to cork/uncork events Luiz Augusto von Dentz (14): bluetooth: Add support for Media API bluetooth: make use of dbus-util helper functions core: make use of dbus_message_iter_append_fixed_array bluetooth: fix case of profile UUIDs to match what BlueZ uses bluetooth: fix build for libdbus < 1.3 bluetooth: detect when bitpool has changed on sbc codec bluetooth: handle Acquire API change bluetooth: reduce bitpool if audio start skipping bluetooth: fix a2dp_process_push bluetooth: add proper handling for bluetooth.nrec property build: move sbc related files to its own directory bluetooth: Fix not updating sample spec when using Media API bluetooth: Fix using pointer-pointer when appending an array as variant bluetooth: Only close SCO if status has changed Maarten Bosmans (119): module-rtp-recv: Request proper rewind after underrun build: Use MODULE_LIBADD in Makefile.am build: Generate module symdefs in src/modules directory build: Don't include empty Makefile.am in subdirs build: Remove unnecessary flags in AM_CFLAGS Use setenv instead of putenv Clean up <poll.h> includes Use <pulsecore/socket.h> instead of <sys/socket.h> Adapt win32 specific code to current API Apply #ifdefs around functionality not available on win32 Use PCRE if POSIX regex.h is not available Fix dependencies and include necessary headers Add AM_LDFLAGS more consistently to all commands Repair some typos Implement some functions for win32 win32: flush stderr after log output win32: Implement rtclock based on QueryPerformanceCounter win32: Implement pa_random module-waveout: Adapted to updated API Give module-waveout a configure switch Use pa_* instead of generic functions to improve portability tests/rtstutter: Use pa_rtclock Use pa_read, pa_write and pa_poll instead of system functions Include <time.h> where necessary Get rid of some unused-function compiler warnings Various fixes for build warnings configure: Drop some warnings Fix up according to Coding Style Fixup #include directives according to Coding Style build: Use silent rules for generating files module-waveout: Add device_name parameter build-sys: Flip default to no git pull on make dist Fix up some double spaces Make pulse compile with clang Update PA_MODULE_USAGE to be in line with actual implementation Find modules and config files relative to the installed libraries. build: copy instead of link pacat to other utils on win32 build: Protect some more variables by ifdefs Use pulsecore/arpa-inet.h to make arpa/inet.h functionality available Fix pa_rtclock_from_wallclock module-waveout: Query device for supported samplerate module-waveout: Move thread creation module-waveout: Fix record/playback args Get rid of some warnings: -Wunused-result Get rid of some warnings: -Wunsafe-loop-optimizations Get rid of some warnings win32: Simplify dl_search_path code Move compile-time checks around pa_run_from_build_tree to core-util pactl: Accept more volume specification formats pactl: Add subcommands to the list command pactl: Separate stat and info actions pactl: Add short output format for list action build-system: Simplify AC_ARG_ENABLE usage build-system: Use AS_IF macro for configure output build-system: Move AC_DEFINE to separate line with AS_IF build-system: Move dependency error messages to outer scope build-system: Replace some more conditionals with AS_IF build-system: Rearrange database selection build-system: Small fixes Make connect-stress test compile for win32 win32: define WIN32_LEAN_AND_MEAN build-sys: Remove unnecessary AC_SUBST calls build-sys: Consolidate host_os handling build-sys: Reset CFLAGS after DBUS check build-sys: Define PA_CFLAGS at right time build-sys: Clean up configure.ac build-sys: Move some stuff around in configure.ac build-sys: Move acx_lirc.m4 contents to configure.ac build-sys: Use AX_TLS macro from autoconf archive build-sys: Use AX_CHECK_DEFINE macro from autoconf archive build-sys: Use AX_PTHREAD macro from autoconf archive Remove unnecessary #includes Remove obsolete description property from modules Add sys/time.h include to rtclock.c build-sys: Cleanup Makefile.am win32: Make once-test work win32: Make some unused-variable warnings go away Update todo Remove libpulse-browse and pabrowse build-sys: Update orc.m4 to latest upstream version build-sys: Use ax_check_flag macros from autoconf archive build-sys: Use AX_DEFINE_DIR macro instead of setting AM_CFLAGS build-sys: Move some more defines from CFLAGS to config.h parecord: Automatically detect file format from extension build-sys: Move some more defines to configure.ac build-sys: Use configure AC_OUTPUT to process config files build-sys: Process configuration files with m4 build-sys: Add more build-time conditionals to config files build-sys: Fix handling of Bluez, Hal dependency on D-Bus module-waveout: Correctly handle mono volume controls on waveout device build-sys: Check for necessary programs in bootstrap.sh Fix default.pa on non udev systems pactl: Update manpage pactl: Short --help output a bit by consolidating sink/source commands pactl: Split help string up in shorter pieces for easier translation Include config.h consistently in source files and not in headers Add some missing format.h includes Move i18n.[ch] to src/pulsecore Plug some memory leaks and an invalid read module-tunnel: Fix for new protocol versions Plug some memory leaks Initialise variables Avoid read from freed memory Initialise write_volume default.pa: Update rtp null sink line pactl: Add set-source-output-mute command Spelling fixes in public headers More spelling fixes gitignore: Add Orc autogenerated files echo-cancel: Use stream index in debug message Remove extra ; s where they are not allowed in strict C99 sndfile-util: Check return value of sf_command for errors module-equalizer-sink: Use %z for printf of size_t variables module-equalizer-sink: Use = in initialising variables bluetooth/sbc: Use __asm__ keyword module-equalizer-sink: Use correct limit in loop Squash the last gcc warnings Make gcc --std=c99 happy module-suspend-on-idle: Move vacuum code to core Maarten Lankhorst (1): bluetooth: Fix a2dp processing Mads Kiilerich (1): headers: Some trivial fixes for some documentation typos Marc-Andr? Lureau (9): bluetooth: use sco_sink/source to start with right state bluetooth: fix set_volume_cb on sco over pcm bluetooth: restore original sco_{sink, src}->set_volume when unloading bluetooth: drop data every 500ms on oor condition interpol-test: remove unused include getopt.h tests: improve resampler test match: Don't double free in case of missing table file match: Match rule earlier, in SINK_INPUT_NEW module-null-source: New null-source module Michael Terry (1): switch-on-connect: Add a new module to allow for hotplugged devices to be used by default. Pascal Terjan (2): l10n: Updates to French (fr) translation l10n: Updates to French (fr) translation Paul Menzel (9): Typo. s/a/are/ man pages: correct formatting/markup of options client.conf.in: Typo. s/a/are/ man: Clarify wording in volume sync documentation. man: Reference correct `--use-pid-file` and fix typo (`s/Of/If/`). build-sys: Correct typos in configure tunnel: Remove bogus `{` bluetooth: run `make update-sbc` to pull in build fix for thumb mode .gitignore: add `.tarball-version` Pierre-Louis Bossart (9): rtpoll: better support for DEBUG_TIMING logs virutal-sink: boilerplate virtual sink to add PCM processing virtual-source: boilerplate virtual source for PCM processing on inputs virtual-sink,source: enable virtual-source and virtual-sink alsa: fix mixer profiles, add passthrough config alsa: add missing iec958 files from previous commit AC3 passthrough support alsa: disable period wakeups in tsched mode if possible sink-input: Don't resample passthrough inputs Ralph Giles (1): Fix two comment typos. Siarhei Siamashka (13): sbc: ensure 16-byte buffer position alignment for 4 subbands encoding sbc: added saturated clipping of decoder output to 16-bit sbc: new 'sbc_calc_scalefactors_j' function added to sbc primitives sbc: MMX optimization for scale factors calculation sbc: ARM NEON optimization for scale factors calculation sbc: fix signedness of parameters sbc: ARM NEON optimized joint stereo processing in SBC encoder sbc: ARM NEON optimizations for input permutation in SBC encoder sbc: slightly faster 'sbc_calc_scalefactors_neon' sbc: faster 'sbc_calculate_bits' function sbc: added "cc" to the clobber list of mmx inline assembly sbc: ARMv6 optimized version of analysis filter for SBC encoder sbc: add iwmmxt optimization for sbc for pxa series cpu Sjoerd Simons (1): build-sys: Link libpulse directly to libdbus-1 if needed Tanu Kaskinen (154): Create module-dbus-protocol with "Hello, world!" functionality. daemon: Implement the DBus server lookup service. dbus-protocol: Connection handling for local connections. dbus-common: Implement infrastructure for registering D-Bus objects on all client connections and for receiving method calls from clients. dbus-protocol: Implement TCP server startup. module-dbus-protocol: Allow anyone to connect the daemon in system mode. module-cli: Fix compilation by adding libpulsecommon to module_cli_la_LIBADD. server-lookup: Update the D-Bus identifiers to be versioned. dbus: Implement the Name property of the core object. Finish the Core dbus interface. Add the forgotten src/modules/dbus directory to git. Bug fixing and minor cleanups. dbus/iface-core.c: Make sure D-Bus objects are created only once. dbus-protocol: Implement extension registration. dbusiface-core: Send signals whenever extensions are registered and unregistered. dbusiface-core: Don't die if we get a default sink/source change event before the new default device is actually created. dbus-protocol: Add debugging output (temporary change). dbus-util: Fix broken proplist reading logic. stream-restore: Expose module to D-Bus. dbusiface-core: Make the interface string a public constant. dbus-protocol, dbusiface-core: Take a reference when storing the core pointer. dbus-protocol: Make debug logging saner. dbus-protocol: Remove erroneous protocol object unref. dbusiface-memstats: Implement the Memstats D-Bus interface. proplist: New function: pa_proplist_equal() dbus: Three entangled changes: dbus: Take advantage of the PA_HASHMAP_FOREACH macro. dbusiface-core: Generate more informative error messages. dbusiface-core: Add functions for getting various object paths. dbus-util: Add helpers for proplist handling. dbus-util: Trivial comment punctuation fix. dbus-protocol: Split some overly long lines. dbus-protocol: Take advantage of the helpers in dbus-util. dbusiface-card: Implement the Card D-Bus interface. dbusiface-card-profile: Implement the CardProfile D-Bus interface. dbus-protocol: Add a note for _send_signal that by default the signal isn't actually sent. dbus-protocol: Fix signal sending for the case when the client doesn't listen for all signals. dbusiface-card: Split some overly long lines. dbusiface-card-profile: Assert the core argument isn't NULL. dbusiface-card: Use the ++ operator like it's meant to be used. dbusiface-card: Assert that the profiles list is empty if there's no active profile. dbusiface-card: Fix the OwnerModule property type in handle_get_all(). dbusiface-core: New function: pa_dbusiface_core_get_card_path(). dbus-protocol: Use pa_hashmap_remove() instead of _get(). dbusiface-device: Implement the Device and DevicePort D-Bus interfaces. dbusiface-core: Two new functions: pa_dbusiface_core_get_playback/record_stream_path(). dbusiface-client: Implement the properties of the Client D-Bus interface. dbusiface-client: Fix the interface name. dbusiface-client: Fix indentation. dbusiface-device: Free the copied proplist. dbusiface-stream: Implement about a half of the Stream D-Bus interface. namereg: Revert default device handling back to the upstream version. dbusiface-core: New function: pa_dbusiface_core_get_client_path(). dbusiface-core: Two new functions: pa_dbusiface_core_get_sink/source(). dbusiface-device: Split some overly long lines. dbusiface-device: Use a single if-else section instead of ternary operator overuse. dbusiface-device: Fix argument reading in handle_suspend(). dbusiface-device: Save one level of identation by returning early. dbusiface-stream: Finish the Stream D-Bus interface. dbusiface-core: Split some overly long lines. dbusiface-core: Use the PA_IDXSET_FOREACH macro. dbusiface-core: Assert that _add/remove_interface calls succeed. dbusiface-sample: Implement the Sample D-Bus interface. dbusifaca-device: Adapt to the changed pa_sink_get/set_volume() interface. proplist: Return early from pa_proplist_equal() if the pointers are equal. proplist: A couple of documentation fixes. modargs: New function: pa_modargs_iterate(). dbus-protocol: Print a debug line whenever interfaces are unregistered. dbusiface-module: Implement the Module D-Bus interface. dbus: Save one level of identation by returning early. dbus: Make sure that subscription callbacks don't try to access removed objects. dbusiface-stream: Only send stream event signals from the right D-Bus objects. dbus: Finish the Client D-Bus interface. dbus: Do message argument type checking early, centrally. dbusiface-core: Add signals FallbackSinkUnset and FallbackSourceUnset. dbus: Change IsMuted property names to Mute. dbus-protocol: Implement argument type checking for normal methods. dbusiface-client: Fix the destructor (stop leaking stuff). dbus: Handle the cases when a non-existing interface is detected in an incoming message. dbus: Add a missing break statement in handle_message_cb(). stream-restore: Fix a few assertion misuses with the D-Bus code. stream-restore: Add a missing pa_xnew0() call in handle_add_entry(). stream-restore: At startup, create dbus entries only for valid database entries. idxset: Fix _get_by_data() comment. sink-input: Replace a tab indentation with spaces. daemon: Don't autospawn if a server address is explicitly configured. alsa-mixer: Use pa_xfree() instead of pa_xstrdup() for freeing a string. alsa-mixer: Replace erroneous PA_ALSA_VOLUME_IGNORE with PA_ALSA_ENUMERATION_IGNORE. alsa: Fix log output to inform about positive base volumes correctly. cli: Increase the command maximum length from 1024 to 2048. dbus: Make it possible to allow remote connections from outside localhost. dbus: Initialize properly the type field of new server structs. dbus: Fix segfault when receiving a property access call that isn't permitted. stream-restore: Fix segfaulting. The dbus entry callbacks expect a dbus_entry pointer instead of a userdata pointer. dbus: Use a struct as the hashmap items for listening_signals. dbus: Fix slightly messed up assertions. stream-restore: When changing restore entries with D-Bus, apply the changes immediately. dbus: Stop polling every 10 seconds to check whether all clients are still alive. dbusiface-core: Track sinks and sources using synchronous hooks instead of asynchronous subscription events. loopback: Make stream names and roles configurable. core: New function: pa_module_update_proplist(). module-alsa-card: New argument: namereg_fail. module-udev-detect: When loading module-alsa-card, use namereg_fail=false. alsa-sink/source: Use the "namereg_fail" module argument. alsa: Print dB values in addition to percentages in debug messages. core: Link virtual sinks and sources to their streams. dbusiface-stream: Send the Device property in the GetAll handler. Allow read-only or non-existing sink input volume. alsa-mixer: Fix path set building when using the element-output or element-input mapping options in profile set configuration. alsa-card: Add a new modarg "profile_set" for giving the card a custom profile set configuration file. Implement the "volume sharing" feature. virtual-sink: Add a modarg for enabling volume sharing. virtual-sink: Add a modarg for forcing flat volume. virtual-sink/source: Use a more descriptive stream name. virtual-sink/source: Remove an unused variable. virtual-sink: Fix a crash when moving the sink to a new master right after setup. sink: Don't send unnecessary PA_SINK_MESSAGE_SET_SHARED_VOLUME messages. sink: Add casts to some printf arguments to get rid of compiler warnings. Add src/*-symdef.h to .gitignore. alsa-mixer: Add DecibelFix section to the profile set config file format. alsa-mixer: Use decibel fixes when getting and setting decibel volumes. pacat: Fix memory leak when draining the context. alsa-mixer: Add a default case for a switch, so that the compiler won't complain about unhandled cases. alsa-card: Print the profile set configuration when loading the card. dbusiface-stream: Fix crash when there's no resampling used. dbus: Always accept mono volumes when setting device or stream volume. alsa-mixer: Implement support for setting element specific upper limits for volume. alsa-mixer: When figuring out the max_dB of a path, use only channels that are used by the path elements. alsa-mixer: Implement constant volume. alsa-mixer: Refactoring: merge element_mute_volume(), element_zero_volume() and element_apply_constant_volume() into a single function. bluetooth: Don't log an error if an endpoint type is disabled. bluetooth: Get rid of warnings about unused stuff when building against a D-Bus version that doesn't have fd-passing support. .gitignore: Add ChangeLog to the ignore list. alsa-mixer: Get rid of a compiler warning. sink-input: Add volume_writable to pa_sink_input. alsa-mixer: Make probing elements with more than two volume channels fail. alsa-mixer: Make sure that SND_MIXER_SCHN_UNKNOWN isn't used when indexing e->masks. alsa-mixer: Check that the kernel driver returns consistent limits with both snd_mixer_selem_get_*_dB_range() and _ask_*_vol_dB(). bluetooth: Drop all "#ifdef NOKIA" directives. bluetooth: Fix HSP volume handling. alsa: Fix log output to inform about positive base volumes correctly. sink-input: Check flat volume with pa_sink_flat_volume_enabled(). protocol-dbus: Fix some memory management bugs. stream-restore: Enable database dumping if DEBUG_VOLUME is defined. match: Support for both merging and replacing proplist updates. dbus: Fix connection idxset freeing when unloading the module. dbus: Fix the order of freeing stuff when unloading module-dbus-protocol. loopback: Add a modarg for disabling remixing. gitignore: Add connect-stress, extended-test and format-test. bluetooth-discover: Remove remaining ifdef NOKIAs. virtual: Fix volume callback setting. daemon-conf: Don't make log files executable. svolume: Make log messages more precise. loopback: New modargs: sink_input_properties and source_output_properties. Vincent Becker (3): Correct wav file creation for 24/32 and 24 bits sample formats HSD=3669357 log: Add a new log target to a file descriptor log: Correct bad function implementation Vladimir Kokarev (2): volume: add pa_cvolume_inc_clamp function lirc,mmkvd: added module parameters volume_limit, volume_step Wang Xingchao (3): alsa: Update process_usec before going to sleep alsa: resets POLLOUT event sink-input: Avoid fake rewind in corked state Wu Fengguang (1): alsa-sink: fix mmap_write() work_done amitakhya (1): Sending translation for Assamese anipeter (1): Sending translation for Malayalam chocolateboy (1): Fix typo in log message: s/may no be/may not be/ elad (1): Sending translation for po/he.po hedda (1): Sending translation for German huan zheng (1): core: volume ramping fix ifelix (1): Sending translation for Tamil jassy (1): Sending translation for Punjabi khasida (3): Sending translation for Japanese Sending translation for Japanese Sending translation for Japanese kkrothap (1): Sending translation for Telugu leahliu (1): Sending translation for Chinese (Simplified) mgiri (1): Sending translation for Oriya mrtom (1): Sending translation for French rajesh (1): Sending translation for Hindi runab (1): Sending translation for Bengali (India) sandeeps (1): Sending translation for Marathi shanky (1): Sending translation for Kannada snowlet (1): Sending translation for po/zh_TW.po swkothar (1): Sending translation for Gujarati ypoyarko (1): Sending translation for Russian zbt (3): Add volume ramping feature - envelop fix Add volume ramping feature - sink-input modification Add volume ramping feature - sink modification zerng07 (1): l10n: Updates to Chinese (Taiwan) (zh_TW) translation - -- Colin Guthrie mageia(at)colin.guthr.ie http://colin.guthr.ie/ Day Job: Tribalogic Limited [http://www.tribalogic.net/] Open Source: Mageia Contributor [http://www.mageia.org/] PulseAudio Hacker [http://www.pulseaudio.org/] Trac Hacker [http://trac.edgewall.org/] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk6BmTsACgkQCoRSYD8tmNglQACgzp65DpafzdDvHl7XuDu253c6 IYoAniO0srB8VPcLKLRh/HA3O+0r9kw9 =V2DU -----END PGP SIGNATURE-----
