hi everyone, I am stuck in the pulseaudio programing, I am adding pulseaudio support in my existing application.Design of the application is synchronous and multithreaded. I need exactly 320 samples? (320*4 bytes) for reading and writing. While using pulseaudio 0.9.14 , below parameters works fine but with 0.9.15? readablesize is not as expecting :( . One more thing , are playattributes and record attributes related to each other or have any effect on one another ? *************** PLAYBACK ATTRIBUTES: ??? play_attributes = (pa_buffer_attr*) malloc (sizeof (pa_buffer_attr)); ???? play_attributes->maxlength =? pa_usec_to_bytes(21*PA_USEC_PER_MSEC,&_sample_spec); ???? play_attributes->tlength = (uint32_t) -1; ???? play_attributes->prebuf = 0; ?????? play_attributes->fragsize = pa_usec_to_bytes (20 * PA_USEC_PER_MSEC, &_sample_spec); ??????? play_attributes->minreq = (uint32_t) -1; **************** RECORD ATTRIBUTES: record_attributes = (pa_buffer_attr*) malloc (sizeof (pa_buffer_attr)); ?record_attributes->maxlength = pa_usec_to_bytes (21 * PA_USEC_PER_MSEC, &_sample_spec); ??????? record_attributes->tlength = (uint32_t) -1; ??????? record_attributes->prebuf = (uint32_t) 0; ??????? record_attributes->fragsize = pa_usec_to_bytes (20 * PA_USEC_PER_MSEC, &_sample_spec); ???????? record_attributes->minreq =pa_usec_to_bytes(1*PA_USEC_PER_SEC,&_sample_spec); I would be grateful. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110421/d510c2ed/attachment.htm>
