On some devices the ACPI name of the touchscreen is e.g. either MSSL1680:00 or MSSL1680:01 depending on the BIOS version. This happens for example on the "Chuwi Hi8 Air" tablet where the initial commit's ts_data uses "MSSL1680:00" but the tablets from the github issue and linux-hardware.org probe linked below both use "MSSL1680:01". Replace the strcmp() match on ts_data->acpi_name with a strstarts() check to allow using a partial match on just the ACPI HID of "MSSL1680" and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly to fix the touchscreen not working on models where it is "MSSL1680:01". Note this drops the length check for I2C_NAME_SIZE. This never was necessary since the ACPI names used are never more then 11 chars and I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long before reaching I2C_NAME_SIZE. Link: https://linux-hardware.org/?computer=AC4301C0542A Closes: https://github.com/onitake/gsl-firmware/issues/91 Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/platform/x86/touchscreen_dmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 7aee5e9ff2b8..969477c83e56 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -81,7 +81,7 @@ static const struct property_entry chuwi_hi8_air_props[] = { }; static const struct ts_dmi_data chuwi_hi8_air_data = { - .acpi_name = "MSSL1680:00", + .acpi_name = "MSSL1680", .properties = chuwi_hi8_air_props, }; @@ -1821,7 +1821,7 @@ static void ts_dmi_add_props(struct i2c_client *client) int error; if (has_acpi_companion(dev) && - !strncmp(ts_data->acpi_name, client->name, I2C_NAME_SIZE)) { + strstarts(client->name, ts_data->acpi_name)) { error = device_create_managed_software_node(dev, ts_data->properties, NULL); if (error) dev_err(dev, "failed to add properties: %d\n", error); -- 2.43.0
