Recently AMT mode was enabled (somewhat unexpectedly) on the Lenovo Z13 platform. The FW is advertising it is available and the driver tries to use it - unfortunately it reports the profile mode incorrectly. Note, there is also some extra work needed to enable the dynamic aspect of AMT support that I will be following up with; but more testing is needed first. This patch just fixes things so the profiles are reported correctly. Link: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/issues/115 Fixes: 46dcbc61b739 ("platform/x86: thinkpad-acpi: Add support for automatic mode transitions") Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx> Signed-off-by: Mark Pearson <mpearson-lenovo@xxxxxxxxx> --- v2: Corrected title and added link and fixes details drivers/platform/x86/thinkpad_acpi.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 1195293b22fd..a95946800ae9 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -10311,9 +10311,11 @@ static DEFINE_MUTEX(dytc_mutex); static int dytc_capabilities; static bool dytc_mmc_get_available; -static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile) +static int convert_dytc_to_profile(int funcmode, int dytcmode, + enum platform_profile_option *profile) { - if (dytc_capabilities & BIT(DYTC_FC_MMC)) { + switch (funcmode) { + case DYTC_FUNCTION_MMC: switch (dytcmode) { case DYTC_MODE_MMC_LOWPOWER: *profile = PLATFORM_PROFILE_LOW_POWER; @@ -10329,8 +10331,7 @@ static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *p return -EINVAL; } return 0; - } - if (dytc_capabilities & BIT(DYTC_FC_PSC)) { + case DYTC_FUNCTION_PSC: switch (dytcmode) { case DYTC_MODE_PSC_LOWPOWER: *profile = PLATFORM_PROFILE_LOW_POWER; @@ -10344,6 +10345,14 @@ static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *p default: /* Unknown mode */ return -EINVAL; } + return 0; + case DYTC_FUNCTION_AMT: + /* For now return balanced. It's the closest we have to 'auto' */ + *profile = PLATFORM_PROFILE_BALANCED; + return 0; + default: + /* Unknown function */ + return -EOPNOTSUPP; } return 0; } @@ -10492,6 +10501,7 @@ static int dytc_profile_set(struct platform_profile_handler *pprof, err = dytc_command(DYTC_SET_COMMAND(DYTC_FUNCTION_PSC, perfmode, 1), &output); if (err) goto unlock; + /* system supports AMT, activate it when on balanced */ if (dytc_capabilities & BIT(DYTC_FC_AMT)) dytc_control_amt(profile == PLATFORM_PROFILE_BALANCED); @@ -10507,7 +10517,7 @@ static void dytc_profile_refresh(void) { enum platform_profile_option profile; int output, err = 0; - int perfmode; + int perfmode, funcmode; mutex_lock(&dytc_mutex); if (dytc_capabilities & BIT(DYTC_FC_MMC)) { @@ -10522,8 +10532,9 @@ static void dytc_profile_refresh(void) if (err) return; + funcmode = (output >> DYTC_GET_FUNCTION_BIT) & 0xF; perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF; - convert_dytc_to_profile(perfmode, &profile); + convert_dytc_to_profile(funcmode, perfmode, &profile); if (profile != dytc_current_profile) { dytc_current_profile = profile; platform_profile_notify(); -- 2.39.0
