Add documentation for the new attributes: - "asic2_health" - health of 2-nd ASIC for system equipped with two ASICs. - "asic_reset" and "asic2_reset" - ASICs reset control. - "comm_chnl_ready" - communication channel indication to remote end (BMC). - "config3" - indication of system minor BOM changes. Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxx> --- .../ABI/stable/sysfs-driver-mlxreg-io | 39 +++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index 3539b1839829..8d9d1fa0fdf0 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -503,3 +503,42 @@ Description: This file shows QSFP ports power status. The value is set to 0 0 - Power good, 1 - Not power good. The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health +Date: July 2022 +KernelVersion: 5.20 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: This file shows 2-nd ASIC health status. The possible values are: + 0 - health failed, 2 - health OK, 3 - ASIC in booting state. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset +Date: July 2022 +KernelVersion: 5.20 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files allow to each of AISCs by writing 1. + + The files are write only. + + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready +Date: July 2022 +KernelVersion: 5.20 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: This file is used to indicate remote end (for example BMC) that system + host CPU is ready for sending telemetry data to remote end. + For indication the file should be written 1. + + The file is write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3 +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: The file indicates COME module hardware configuration. + The value is pushed by hardware through GPIO pins. + The purpose is to expose some minor BOM changes for the same system SKU. + + The file is read only. -- 2.20.1
