Fix e-mail in contact fields. Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxx> --- .../ABI/stable/sysfs-driver-mlxreg-io | 42 +++++++++---------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index b312242d4f40..3539b1839829 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -1,7 +1,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health Date: June 2018 KernelVersion: 4.19 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file shows ASIC health status. The possible values are: 0 - health failed, 2 - health OK, 3 - ASIC in booting state. @@ -11,7 +11,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version Date: June 2018 KernelVersion: 4.19 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show with which CPLD versions have been burned on carrier and switch boards. @@ -20,7 +20,7 @@ Description: These files show with which CPLD versions have been burned What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir Date: December 2018 KernelVersion: 5.0 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file shows the system fans direction: forward direction - relevant bit is set 0; reversed direction - relevant bit is set 1. @@ -30,7 +30,7 @@ Description: This file shows the system fans direction: What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version Date: November 2018 KernelVersion: 5.0 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show with which CPLD versions have been burned on LED or Gearbox board. @@ -39,7 +39,7 @@ Description: These files show with which CPLD versions have been burned What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable Date: November 2018 KernelVersion: 5.0 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files enable and disable the access to the JTAG domain. By default access to the JTAG domain is disabled. @@ -48,7 +48,7 @@ Description: These files enable and disable the access to the JTAG domain. What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio Date: June 2018 KernelVersion: 4.19 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file allows iio devices selection. Attribute select_iio can be written with 0 or with 1. It @@ -62,7 +62,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down Date: June 2018 KernelVersion: 4.19 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files allow asserting system power cycling, switching power supply units on and off and system's main power domain shutdown. @@ -89,7 +89,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset Date: June 2018 KernelVersion: 4.19 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show the system reset cause, as following: power auxiliary outage or power refresh, ASIC thermal shutdown, halt, hotswap, watchdog, firmware reset, long press power button, @@ -106,7 +106,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail Date: November 2018 KernelVersion: 5.0 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show the system reset cause, as following: ComEx power fail, reset from ComEx, system platform reset, reset due to voltage monitor devices upgrade failure, @@ -119,7 +119,7 @@ Description: These files show the system reset cause, as following: ComEx What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version Date: November 2018 KernelVersion: 5.0 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show with which CPLD versions have been burned on LED board. @@ -133,7 +133,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd Date: June 2019 KernelVersion: 5.3 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show the system reset cause, as following: COMEX thermal shutdown; wathchdog power off or reset was derived by one of the next components: COMEX, switch board or by Small Form @@ -148,7 +148,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2 Date: January 2020 KernelVersion: 5.6 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show system static topology identification like system's static I2C topology, number and type of FPGA devices within the system and so on. @@ -161,7 +161,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off Date: January 2020 KernelVersion: 5.6 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show the system reset causes, as following: reset due to AC power failure, reset invoked from software by assertion reset signal through CPLD. reset caused by signal @@ -173,7 +173,7 @@ Description: These files show the system reset causes, as following: reset What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis Date: January 2020 KernelVersion: 5.6 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file allows to retain ASIC up during PCIe root complex reset, when attribute is set 1. @@ -182,7 +182,7 @@ Description: This file allows to retain ASIC up during PCIe root complex What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp Date: January 2020 KernelVersion: 5.6 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file allows to overwrite system VPD hardware write protection when attribute is set 1. @@ -191,7 +191,7 @@ Description: This file allows to overwrite system VPD hardware write What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status Date: January 2020 KernelVersion: 5.6 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file exposes the configuration update status of burnable voltage regulator devices. The status values are as following: 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress. @@ -201,7 +201,7 @@ Description: This file exposes the configuration update status of burnable What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version Date: January 2020 KernelVersion: 5.6 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file exposes the firmware version of burnable voltage regulator devices. @@ -217,7 +217,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min Date: July 2020 KernelVersion: 5.9 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: These files show with which CPLD part numbers and minor versions have been burned CPLD devices equipped on a system. @@ -471,7 +471,7 @@ Description: These files provide the maximum powered required for line card What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset Date: May 2022 KernelVersion: 5.19 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file allows to reset PHY 88E1548 when attribute is set 0 due to some abnormal PHY behavior. Expected behavior: @@ -483,7 +483,7 @@ Description: This file allows to reset PHY 88E1548 when attribute is set 0 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset Date: May 2022 KernelVersion: 5.19 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file allows to reset ASIC MT52132 when attribute is set 0 due to some abnormal ASIC behavior. Expected behavior: @@ -495,7 +495,7 @@ Description: This file allows to reset ASIC MT52132 when attribute is set 0 What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good Date: May 2022 KernelVersion: 5.19 -Contact: Vadim Pasternak <vadimpmellanox.com> +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> Description: This file shows QSFP ports power status. The value is set to 0 when one of any QSFP ports is plugged. The value is set to 1 when there are no any QSFP ports are plugged. -- 2.20.1
