Hi,
On Mon, Aug 16, 2021 at 10:52 PM Pandruvada, Srinivas
<srinivas.pandruvada@xxxxxxxxx> wrote:
>
> On Mon, 2021-08-16 at 18:51 +0800, Kate Hsuan wrote:
> > Move intel_turbo_max_3 to intel sub-directory to improve readability
> > and rename it from intel_turbo_max_3.c to turbo_max_3.c
> >
> > Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
I'll add this to the commit message.
Kate
>
> > ---
> > drivers/platform/x86/Kconfig | 10 ----------
> > drivers/platform/x86/Makefile | 2 +-
> > drivers/platform/x86/intel/Kconfig | 10 ++++++++++
> > drivers/platform/x86/intel/Makefile | 4 ++--
> > .../x86/{intel_turbo_max_3.c => intel/turbo_max_3.c} | 0
> > 5 files changed, 13 insertions(+), 13 deletions(-)
> > rename drivers/platform/x86/{intel_turbo_max_3.c =>
> > intel/turbo_max_3.c} (100%)
> >
> > diff --git a/drivers/platform/x86/Kconfig
> > b/drivers/platform/x86/Kconfig
> > index a9eb1f6e184f..666103c7f0de 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -1111,16 +1111,6 @@ config INTEL_IMR
> >
> > source "drivers/platform/x86/intel_speed_select_if/Kconfig"
> >
> > -config INTEL_TURBO_MAX_3
> > - bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
> > - depends on X86_64 && SCHED_MC_PRIO
> > - help
> > - This driver reads maximum performance ratio of each CPU and
> > set up
> > - the scheduler priority metrics. In this way scheduler can
> > prefer
> > - CPU with higher performance to schedule tasks.
> > - This driver is only required when the system is not using
> > Hardware
> > - P-States (HWP). In HWP mode, priority can be read from ACPI
> > tables.
> > -
> > config INTEL_UNCORE_FREQ_CONTROL
> > tristate "Intel Uncore frequency control driver"
> > depends on X86_64
> > diff --git a/drivers/platform/x86/Makefile
> > b/drivers/platform/x86/Makefile
> > index 0389fe12e7c0..fb39644db7f9 100644
> > --- a/drivers/platform/x86/Makefile
> > +++ b/drivers/platform/x86/Makefile
> > @@ -123,7 +123,7 @@ obj-$(CONFIG_WIRELESS_HOTKEY) +=
> > wireless-hotkey.o
> >
> >
> > obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) +=
> > intel_speed_select_if/
> > -obj-$(CONFIG_INTEL_TURBO_MAX_3) +=
> > intel_turbo_max_3.o
> > +
> > obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-
> > uncore-frequency.o
> >
> >
> > diff --git a/drivers/platform/x86/intel/Kconfig
> > b/drivers/platform/x86/intel/Kconfig
> > index 83f7dc3e9506..8070804fe916 100644
> > --- a/drivers/platform/x86/intel/Kconfig
> > +++ b/drivers/platform/x86/intel/Kconfig
> > @@ -99,4 +99,14 @@ config INTEL_SMARTCONNECT
> > Connect enabled, and if so disables it.
> >
> >
> > +config INTEL_TURBO_MAX_3
> > + bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
> > + depends on X86_64 && SCHED_MC_PRIO
> > + help
> > + This driver reads maximum performance ratio of each CPU and
> > set up
> > + the scheduler priority metrics. In this way scheduler can
> > prefer
> > + CPU with higher performance to schedule tasks.
> > + This driver is only required when the system is not using
> > Hardware
> > + P-States (HWP). In HWP mode, priority can be read from ACPI
> > tables.
> > +
> > endif # X86_PLATFORM_DRIVERS_INTEL
> > diff --git a/drivers/platform/x86/intel/Makefile
> > b/drivers/platform/x86/intel/Makefile
> > index da8fbe87bf03..cff65fa2b1aa 100644
> > --- a/drivers/platform/x86/intel/Makefile
> > +++ b/drivers/platform/x86/intel/Makefile
> > @@ -33,5 +33,5 @@ intel-rst-
> > y := rst.o
> > obj-$(CONFIG_INTEL_RST) += intel-rst.o
> > intel-smartconnect-y := smartconnect.o
> > obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
> > -
> > -
> > +intel_turbo_max_3-y :=
> > turbo_max_3.o
> > +obj-$(CONFIG_INTEL_TURBO_MAX_3) +=
> > intel_turbo_max_3.o
> > diff --git a/drivers/platform/x86/intel_turbo_max_3.c
> > b/drivers/platform/x86/intel/turbo_max_3.c
> > similarity index 100%
> > rename from drivers/platform/x86/intel_turbo_max_3.c
> > rename to drivers/platform/x86/intel/turbo_max_3.c
>
