On Mon, 2021-08-16 at 18:51 +0800, Kate Hsuan wrote:
> Move intel_turbo_max_3 to intel sub-directory to improve readability
> and rename it from intel_turbo_max_3.c to turbo_max_3.c
>
> Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> ---
> drivers/platform/x86/Kconfig | 10 ----------
> drivers/platform/x86/Makefile | 2 +-
> drivers/platform/x86/intel/Kconfig | 10 ++++++++++
> drivers/platform/x86/intel/Makefile | 4 ++--
> .../x86/{intel_turbo_max_3.c => intel/turbo_max_3.c} | 0
> 5 files changed, 13 insertions(+), 13 deletions(-)
> rename drivers/platform/x86/{intel_turbo_max_3.c =>
> intel/turbo_max_3.c} (100%)
>
> diff --git a/drivers/platform/x86/Kconfig
> b/drivers/platform/x86/Kconfig
> index a9eb1f6e184f..666103c7f0de 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1111,16 +1111,6 @@ config INTEL_IMR
>
> source "drivers/platform/x86/intel_speed_select_if/Kconfig"
>
> -config INTEL_TURBO_MAX_3
> - bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
> - depends on X86_64 && SCHED_MC_PRIO
> - help
> - This driver reads maximum performance ratio of each CPU and
> set up
> - the scheduler priority metrics. In this way scheduler can
> prefer
> - CPU with higher performance to schedule tasks.
> - This driver is only required when the system is not using
> Hardware
> - P-States (HWP). In HWP mode, priority can be read from ACPI
> tables.
> -
> config INTEL_UNCORE_FREQ_CONTROL
> tristate "Intel Uncore frequency control driver"
> depends on X86_64
> diff --git a/drivers/platform/x86/Makefile
> b/drivers/platform/x86/Makefile
> index 0389fe12e7c0..fb39644db7f9 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -123,7 +123,7 @@ obj-$(CONFIG_WIRELESS_HOTKEY) +=
> wireless-hotkey.o
>
>
> obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) +=
> intel_speed_select_if/
> -obj-$(CONFIG_INTEL_TURBO_MAX_3) +=
> intel_turbo_max_3.o
> +
> obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-
> uncore-frequency.o
>
>
> diff --git a/drivers/platform/x86/intel/Kconfig
> b/drivers/platform/x86/intel/Kconfig
> index 83f7dc3e9506..8070804fe916 100644
> --- a/drivers/platform/x86/intel/Kconfig
> +++ b/drivers/platform/x86/intel/Kconfig
> @@ -99,4 +99,14 @@ config INTEL_SMARTCONNECT
> Connect enabled, and if so disables it.
>
>
> +config INTEL_TURBO_MAX_3
> + bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
> + depends on X86_64 && SCHED_MC_PRIO
> + help
> + This driver reads maximum performance ratio of each CPU and
> set up
> + the scheduler priority metrics. In this way scheduler can
> prefer
> + CPU with higher performance to schedule tasks.
> + This driver is only required when the system is not using
> Hardware
> + P-States (HWP). In HWP mode, priority can be read from ACPI
> tables.
> +
> endif # X86_PLATFORM_DRIVERS_INTEL
> diff --git a/drivers/platform/x86/intel/Makefile
> b/drivers/platform/x86/intel/Makefile
> index da8fbe87bf03..cff65fa2b1aa 100644
> --- a/drivers/platform/x86/intel/Makefile
> +++ b/drivers/platform/x86/intel/Makefile
> @@ -33,5 +33,5 @@ intel-rst-
> y := rst.o
> obj-$(CONFIG_INTEL_RST) += intel-rst.o
> intel-smartconnect-y := smartconnect.o
> obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
> -
> -
> +intel_turbo_max_3-y :=
> turbo_max_3.o
> +obj-$(CONFIG_INTEL_TURBO_MAX_3) +=
> intel_turbo_max_3.o
> diff --git a/drivers/platform/x86/intel_turbo_max_3.c
> b/drivers/platform/x86/intel/turbo_max_3.c
> similarity index 100%
> rename from drivers/platform/x86/intel_turbo_max_3.c
> rename to drivers/platform/x86/intel/turbo_max_3.c
