On Sat, Sep 21, 2019 at 9:31 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> Hi,
>
> On 21-09-2019 00:33, Yauhen Kharuzhy wrote:
> > Existing intel_cht_int33fe ACPI pseudo-device driver assumes that
> > hardware has Type-C connector and register related devices described as
> > I2C connections in the _CRS resource.
> >
> > There is at least one hardware (Lenovo Yoga Book YB1-91L/F) with Micro-B
> > USB connector exists. It has INT33FE device in the DSDT table but
> > there are only two I2C connection described: PMIC and BQ27452 battery
> > fuel gauge.
> >
> > Splitting existing INT33FE driver allow to maintain code for USB Micro-B
> > (or AB) connector variant separately and make it simpler.
> >
> > Split driver to intel_cht_int33fe_common.c and
> > intel_cht_int33fe_{microb,typec}.c. Compile all this sources to one .ko
> > module to make user experience easier.
> >
> > Signed-off-by: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
>
> This version still works for me on my typec device:
>
> Tested-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>
> The code also looks good to me:
>
> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>
By some reason it doesn't apply.
> Regards,
>
> Hans
>
>
>
> > ---
> > drivers/platform/x86/Kconfig | 10 +-
> > drivers/platform/x86/Makefile | 4 +
> > .../platform/x86/intel_cht_int33fe_common.c | 147 ++++++++++++++++++
> > .../platform/x86/intel_cht_int33fe_common.h | 41 +++++
> > .../platform/x86/intel_cht_int33fe_microb.c | 57 +++++++
> > ...ht_int33fe.c => intel_cht_int33fe_typec.c} | 78 +---------
> > 6 files changed, 265 insertions(+), 72 deletions(-)
> > create mode 100644 drivers/platform/x86/intel_cht_int33fe_common.c
> > create mode 100644 drivers/platform/x86/intel_cht_int33fe_common.h
> > create mode 100644 drivers/platform/x86/intel_cht_int33fe_microb.c
> > rename drivers/platform/x86/{intel_cht_int33fe.c => intel_cht_int33fe_typec.c} (82%)
> >
> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > index 1b67bb578f9f..e9e5aa791caf 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -930,14 +930,20 @@ config INTEL_CHT_INT33FE
> > This driver add support for the INT33FE ACPI device found on
> > some Intel Cherry Trail devices.
> >
> > + There are two kinds of INT33FE ACPI device possible: for hardware
> > + with USB Type-C and Micro-B connectors. This driver supports both.
> > +
> > The INT33FE ACPI device has a CRS table with I2cSerialBusV2
> > - resources for 3 devices: Maxim MAX17047 Fuel Gauge Controller,
> > + resources for Fuel Gauge Controller and (in the Type-C variant)
> > FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
> > This driver instantiates i2c-clients for these, so that standard
> > i2c drivers for these chips can bind to the them.
> >
> > If you enable this driver it is advised to also select
> > - CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
> > + CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
> > + device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
> > + for Type-C device.
> > +
> >
> > config INTEL_INT0002_VGPIO
> > tristate "Intel ACPI INT0002 Virtual GPIO driver"
> > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> > index 415104033060..216d3b6fd6a7 100644
> > --- a/drivers/platform/x86/Makefile
> > +++ b/drivers/platform/x86/Makefile
> > @@ -61,6 +61,10 @@ obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o
> > obj-$(CONFIG_TOSHIBA_HAPS) += toshiba_haps.o
> > obj-$(CONFIG_TOSHIBA_WMI) += toshiba-wmi.o
> > obj-$(CONFIG_INTEL_CHT_INT33FE) += intel_cht_int33fe.o
> > +intel_cht_int33fe-objs := intel_cht_int33fe_common.o \
> > + intel_cht_int33fe_typec.o \
> > + intel_cht_int33fe_microb.o
> > +
> > obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o
> > obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o
> > obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o
> > diff --git a/drivers/platform/x86/intel_cht_int33fe_common.c b/drivers/platform/x86/intel_cht_int33fe_common.c
> > new file mode 100644
> > index 000000000000..42dd11623f56
> > --- /dev/null
> > +++ b/drivers/platform/x86/intel_cht_int33fe_common.c
> > @@ -0,0 +1,147 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Common code for Intel Cherry Trail ACPI INT33FE pseudo device drivers
> > + * (USB Micro-B and Type-C connector variants).
> > + *
> > + * Copyright (c) 2019 Yauhen Kharuzhy <jekhor@xxxxxxxxx>
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +
> > +#include "intel_cht_int33fe_common.h"
> > +
> > +#define EXPECTED_PTYPE 4
> > +
> > +static int cht_int33fe_i2c_res_filter(struct acpi_resource *ares, void *data)
> > +{
> > + struct acpi_resource_i2c_serialbus *sb;
> > + int *count = data;
> > +
> > + if (i2c_acpi_get_i2c_resource(ares, &sb))
> > + (*count)++;
> > +
> > + return 1;
> > +}
> > +
> > +static int cht_int33fe_count_i2c_clients(struct device *dev)
> > +{
> > + struct acpi_device *adev;
> > + LIST_HEAD(resource_list);
> > + int count = 0;
> > +
> > + adev = ACPI_COMPANION(dev);
> > + if (!adev)
> > + return -EINVAL;
> > +
> > + acpi_dev_get_resources(adev, &resource_list,
> > + cht_int33fe_i2c_res_filter, &count);
> > +
> > + acpi_dev_free_resource_list(&resource_list);
> > +
> > + return count;
> > +}
> > +
> > +static int cht_int33fe_check_hw_type(struct device *dev)
> > +{
> > + unsigned long long ptyp;
> > + acpi_status status;
> > + int ret;
> > +
> > + status = acpi_evaluate_integer(ACPI_HANDLE(dev), "PTYP", NULL, &ptyp);
> > + if (ACPI_FAILURE(status)) {
> > + dev_err(dev, "Error getting PTYPE\n");
> > + return -ENODEV;
> > + }
> > +
> > + /*
> > + * The same ACPI HID is used for different configurations check PTYP
> > + * to ensure that we are dealing with the expected config.
> > + */
> > + if (ptyp != EXPECTED_PTYPE)
> > + return -ENODEV;
> > +
> > + /* Check presence of INT34D3 (hardware-rev 3) expected for ptype == 4 */
> > + if (!acpi_dev_present("INT34D3", "1", 3)) {
> > + dev_err(dev, "Error PTYPE == %d, but no INT34D3 device\n",
> > + EXPECTED_PTYPE);
> > + return -ENODEV;
> > + }
> > +
> > + ret = cht_int33fe_count_i2c_clients(dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + switch (ret) {
> > + case 2:
> > + return INT33FE_HW_MICROB;
> > + case 4:
> > + return INT33FE_HW_TYPEC;
> > + default:
> > + return -ENODEV;
> > + }
> > +}
> > +
> > +static int cht_int33fe_probe(struct platform_device *pdev)
> > +{
> > + struct cht_int33fe_data *data;
> > + struct device *dev = &pdev->dev;
> > + int ret;
> > +
> > + ret = cht_int33fe_check_hw_type(dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + data->dev = dev;
> > +
> > + switch (ret) {
> > + case INT33FE_HW_MICROB:
> > + data->probe = cht_int33fe_microb_probe;
> > + data->remove = cht_int33fe_microb_remove;
> > + break;
> > +
> > + case INT33FE_HW_TYPEC:
> > + data->probe = cht_int33fe_typec_probe;
> > + data->remove = cht_int33fe_typec_remove;
> > + break;
> > + }
> > +
> > + platform_set_drvdata(pdev, data);
> > +
> > + return data->probe(data);
> > +}
> > +
> > +static int cht_int33fe_remove(struct platform_device *pdev)
> > +{
> > + struct cht_int33fe_data *data = platform_get_drvdata(pdev);
> > +
> > + return data->remove(data);
> > +}
> > +
> > +static const struct acpi_device_id cht_int33fe_acpi_ids[] = {
> > + { "INT33FE", },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(acpi, cht_int33fe_acpi_ids);
> > +
> > +static struct platform_driver cht_int33fe_driver = {
> > + .driver = {
> > + .name = "Intel Cherry Trail ACPI INT33FE driver",
> > + .acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids),
> > + },
> > + .probe = cht_int33fe_probe,
> > + .remove = cht_int33fe_remove,
> > +};
> > +
> > +module_platform_driver(cht_int33fe_driver);
> > +
> > +MODULE_DESCRIPTION("Intel Cherry Trail ACPI INT33FE pseudo device driver");
> > +MODULE_AUTHOR("Yauhen Kharuzhy <jekhor@xxxxxxxxx>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/platform/x86/intel_cht_int33fe_common.h b/drivers/platform/x86/intel_cht_int33fe_common.h
> > new file mode 100644
> > index 000000000000..03cd45f4e8cb
> > --- /dev/null
> > +++ b/drivers/platform/x86/intel_cht_int33fe_common.h
> > @@ -0,0 +1,41 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Common code for Intel Cherry Trail ACPI INT33FE pseudo device drivers
> > + * (USB Micro-B and Type-C connector variants), header file
> > + *
> > + * Copyright (c) 2019 Yauhen Kharuzhy <jekhor@xxxxxxxxx>
> > + */
> > +
> > +#ifndef _INTEL_CHT_INT33FE_COMMON_H
> > +#define _INTEL_CHT_INT33FE_COMMON_H
> > +
> > +#include <linux/device.h>
> > +#include <linux/fwnode.h>
> > +#include <linux/i2c.h>
> > +
> > +enum int33fe_hw_type {
> > + INT33FE_HW_MICROB,
> > + INT33FE_HW_TYPEC,
> > +};
> > +
> > +struct cht_int33fe_data {
> > + struct device *dev;
> > +
> > + int (*probe)(struct cht_int33fe_data *data);
> > + int (*remove)(struct cht_int33fe_data *data);
> > +
> > + struct i2c_client *battery_fg;
> > +
> > + /* Type-C only */
> > + struct i2c_client *fusb302;
> > + struct i2c_client *pi3usb30532;
> > +
> > + struct fwnode_handle *dp;
> > +};
> > +
> > +int cht_int33fe_microb_probe(struct cht_int33fe_data *data);
> > +int cht_int33fe_microb_remove(struct cht_int33fe_data *data);
> > +int cht_int33fe_typec_probe(struct cht_int33fe_data *data);
> > +int cht_int33fe_typec_remove(struct cht_int33fe_data *data);
> > +
> > +#endif /* _INTEL_CHT_INT33FE_COMMON_H */
> > diff --git a/drivers/platform/x86/intel_cht_int33fe_microb.c b/drivers/platform/x86/intel_cht_int33fe_microb.c
> > new file mode 100644
> > index 000000000000..20b11e0d9a75
> > --- /dev/null
> > +++ b/drivers/platform/x86/intel_cht_int33fe_microb.c
> > @@ -0,0 +1,57 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Intel Cherry Trail ACPI INT33FE pseudo device driver for devices with
> > + * USB Micro-B connector (e.g. without of FUSB302 USB Type-C controller)
> > + *
> > + * Copyright (C) 2019 Yauhen Kharuzhy <jekhor@xxxxxxxxx>
> > + *
> > + * At least one Intel Cherry Trail based device which ship with Windows 10
> > + * (Lenovo YogaBook YB1-X91L/F tablet), have this weird INT33FE ACPI device
> > + * with a CRS table with 2 I2cSerialBusV2 resources, for 2 different chips
> > + * attached to various i2c busses:
> > + * 1. The Whiskey Cove PMIC, which is also described by the INT34D3 ACPI device
> > + * 2. TI BQ27542 Fuel Gauge Controller
> > + *
> > + * So this driver is a stub / pseudo driver whose only purpose is to
> > + * instantiate i2c-client for battery fuel gauge, so that standard i2c driver
> > + * for these chip can bind to the it.
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/slab.h>
> > +#include <linux/usb/pd.h>
> > +
> > +#include "intel_cht_int33fe_common.h"
> > +
> > +static const char * const bq27xxx_suppliers[] = { "bq25890-charger" };
> > +
> > +static const struct property_entry bq27xxx_props[] = {
> > + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq27xxx_suppliers),
> > + { }
> > +};
> > +
> > +int cht_int33fe_microb_probe(struct cht_int33fe_data *data)
> > +{
> > + struct device *dev = data->dev;
> > + struct i2c_board_info board_info;
> > +
> > + memset(&board_info, 0, sizeof(board_info));
> > + strscpy(board_info.type, "bq27542", ARRAY_SIZE(board_info.type));
> > + board_info.dev_name = "bq27542";
> > + board_info.properties = bq27xxx_props;
> > + data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
> > +
> > + return PTR_ERR_OR_ZERO(data->battery_fg);
> > +}
> > +
> > +int cht_int33fe_microb_remove(struct cht_int33fe_data *data)
> > +{
> > + i2c_unregister_device(data->battery_fg);
> > +
> > + return 0;
> > +}
> > diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe_typec.c
> > similarity index 82%
> > rename from drivers/platform/x86/intel_cht_int33fe.c
> > rename to drivers/platform/x86/intel_cht_int33fe_typec.c
> > index 1d5d877b9582..2d097fc2dd46 100644
> > --- a/drivers/platform/x86/intel_cht_int33fe.c
> > +++ b/drivers/platform/x86/intel_cht_int33fe_typec.c
> > @@ -17,17 +17,15 @@
> > * for these chips can bind to the them.
> > */
> >
> > -#include <linux/acpi.h>
> > #include <linux/i2c.h>
> > #include <linux/interrupt.h>
> > -#include <linux/module.h>
> > #include <linux/pci.h>
> > #include <linux/platform_device.h>
> > #include <linux/regulator/consumer.h>
> > #include <linux/slab.h>
> > #include <linux/usb/pd.h>
> >
> > -#define EXPECTED_PTYPE 4
> > +#include "intel_cht_int33fe_common.h"
> >
> > enum {
> > INT33FE_NODE_FUSB302,
> > @@ -38,14 +36,6 @@ enum {
> > INT33FE_NODE_MAX,
> > };
> >
> > -struct cht_int33fe_data {
> > - struct i2c_client *max17047;
> > - struct i2c_client *fusb302;
> > - struct i2c_client *pi3usb30532;
> > -
> > - struct fwnode_handle *dp;
> > -};
> > -
> > static const struct software_node nodes[];
> >
> > static const struct software_node_ref_args pi3usb30532_ref = {
> > @@ -251,43 +241,20 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
> > strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
> > board_info.dev_name = "max17047";
> > board_info.fwnode = fwnode;
> > - data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
> > + data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
> >
> > - return PTR_ERR_OR_ZERO(data->max17047);
> > + return PTR_ERR_OR_ZERO(data->battery_fg);
> > }
> >
> > -static int cht_int33fe_probe(struct platform_device *pdev)
> > +int cht_int33fe_typec_probe(struct cht_int33fe_data *data)
> > {
> > - struct device *dev = &pdev->dev;
> > + struct device *dev = data->dev;
> > struct i2c_board_info board_info;
> > - struct cht_int33fe_data *data;
> > struct fwnode_handle *fwnode;
> > struct regulator *regulator;
> > - unsigned long long ptyp;
> > - acpi_status status;
> > int fusb302_irq;
> > int ret;
> >
> > - status = acpi_evaluate_integer(ACPI_HANDLE(dev), "PTYP", NULL, &ptyp);
> > - if (ACPI_FAILURE(status)) {
> > - dev_err(dev, "Error getting PTYPE\n");
> > - return -ENODEV;
> > - }
> > -
> > - /*
> > - * The same ACPI HID is used for different configurations check PTYP
> > - * to ensure that we are dealing with the expected config.
> > - */
> > - if (ptyp != EXPECTED_PTYPE)
> > - return -ENODEV;
> > -
> > - /* Check presence of INT34D3 (hardware-rev 3) expected for ptype == 4 */
> > - if (!acpi_dev_present("INT34D3", "1", 3)) {
> > - dev_err(dev, "Error PTYPE == %d, but no INT34D3 device\n",
> > - EXPECTED_PTYPE);
> > - return -ENODEV;
> > - }
> > -
> > /*
> > * We expect the WC PMIC to be paired with a TI bq24292i charger-IC.
> > * We check for the bq24292i vbus regulator here, this has 2 purposes:
> > @@ -317,10 +284,6 @@ static int cht_int33fe_probe(struct platform_device *pdev)
> > return fusb302_irq;
> > }
> >
> > - data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > - if (!data)
> > - return -ENOMEM;
> > -
> > ret = cht_int33fe_add_nodes(data);
> > if (ret)
> > return ret;
> > @@ -365,15 +328,13 @@ static int cht_int33fe_probe(struct platform_device *pdev)
> > goto out_unregister_fusb302;
> > }
> >
> > - platform_set_drvdata(pdev, data);
> > -
> > return 0;
> >
> > out_unregister_fusb302:
> > i2c_unregister_device(data->fusb302);
> >
> > out_unregister_max17047:
> > - i2c_unregister_device(data->max17047);
> > + i2c_unregister_device(data->battery_fg);
> >
> > out_remove_nodes:
> > cht_int33fe_remove_nodes(data);
> > @@ -381,36 +342,13 @@ static int cht_int33fe_probe(struct platform_device *pdev)
> > return ret;
> > }
> >
> > -static int cht_int33fe_remove(struct platform_device *pdev)
> > +int cht_int33fe_typec_remove(struct cht_int33fe_data *data)
> > {
> > - struct cht_int33fe_data *data = platform_get_drvdata(pdev);
> > -
> > i2c_unregister_device(data->pi3usb30532);
> > i2c_unregister_device(data->fusb302);
> > - i2c_unregister_device(data->max17047);
> > + i2c_unregister_device(data->battery_fg);
> >
> > cht_int33fe_remove_nodes(data);
> >
> > return 0;
> > }
> > -
> > -static const struct acpi_device_id cht_int33fe_acpi_ids[] = {
> > - { "INT33FE", },
> > - { }
> > -};
> > -MODULE_DEVICE_TABLE(acpi, cht_int33fe_acpi_ids);
> > -
> > -static struct platform_driver cht_int33fe_driver = {
> > - .driver = {
> > - .name = "Intel Cherry Trail ACPI INT33FE driver",
> > - .acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids),
> > - },
> > - .probe = cht_int33fe_probe,
> > - .remove = cht_int33fe_remove,
> > -};
> > -
> > -module_platform_driver(cht_int33fe_driver);
> > -
> > -MODULE_DESCRIPTION("Intel Cherry Trail ACPI INT33FE pseudo device driver");
> > -MODULE_AUTHOR("Hans de Goede <hdegoede@xxxxxxxxxx>");
> > -MODULE_LICENSE("GPL v2");
> >
>
--
With Best Regards,
Andy Shevchenko
