Re: [PATCH v5 1/3] mfd: Add support for Cherry Trail Dollar Cove TI PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 07 Sep 2017 15:00:01 +0200,
Lee Jones wrote:
> 
> > > > > > > > > > > > This patch adds the MFD driver for Dollar Cove (TI version) PMIC with
> > > > > > > > > > > > ACPI INT33F5 that is found on some Intel Cherry Trail devices.
> > > > > > > > > > > > The driver is based on the original work by Intel, found at:
> > > > > > > > > > > >   https://github.com/01org/ProductionKernelQuilts
> > > > > > > > > > > > 
> > > > > > > > > > > > This is a minimal version for adding the basic resources.  Currently,
> > > > > > > > > > > > only ACPI PMIC opregion and the external power-button are used.
> > > > > > > > > > > > 
> > > > > > > > > > > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891
> > > > > > > > > > > > Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > > > > > > > > > > > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > > > > > > > > > > > Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
> > > > > > > > > > > > ---
> > > > > > > > > > > > v4->v5:
> > > > > > > > > > > > * Minor coding-style fixes suggested by Lee
> > > > > > > > > > > > * Put GPL text
> > > > > > > > > > > > v3->v4:
> > > > > > > > > > > > * no change for this patch
> > > > > > > > > > > > v2->v3:
> > > > > > > > > > > > * Rename dc_ti with chtdc_ti in all places
> > > > > > > > > > > > * Driver/kconfig renames accordingly
> > > > > > > > > > > > * Added acks by Andy and Mika
> > > > > > > > > > > > v1->v2:
> > > > > > > > > > > > * Minor cleanups as suggested by Andy
> > > > > > > > > > > > 
> > > > > > > > > > > >  drivers/mfd/Kconfig                   |  13 +++
> > > > > > > > > > > >  drivers/mfd/Makefile                  |   1 +
> > > > > > > > > > > >  drivers/mfd/intel_soc_pmic_chtdc_ti.c | 184 ++++++++++++++++++++++++++++++++++
> > > > > > > > > > > >  3 files changed, 198 insertions(+)
> > > > > > > > > > > >  create mode 100644 drivers/mfd/intel_soc_pmic_chtdc_ti.c
> > > > > > > > > > > 
> > > > > > > > > > > For my own reference:
> > > > > > > > > > >   Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>
> > > > > > > > > > 
> > > > > > > > > > Thanks!
> > > > > > > > > > 
> > > > > > > > > > Now the question is how to deal with these.  It's no critical things,
> > > > > > > > > > so I'm OK to postpone for 4.15.  OTOH, it's really a new
> > > > > > > > > > device-specific stuff, thus it can't break anything else, and it'd be
> > > > > > > > > > fairly safe to add it for 4.14 although it's at a bit late stage.
> > > > > > > > > 
> > > > > > > > > Yes, you are over 2 weeks late for v4.14.  It will have to be v4.15.
> > > > > > > > 
> > > > > > > > OK, I'll ring your bells again once when 4.15 development is opened.
> > > > > > > 
> > > > > > > Please don't.  Just collect all the Acks you have received and sent
> > > > > > > out the set again changing [PATCH] for [RESEND].  Only if there
> > > > > > > haven't been any code changes of course. 
> > > > > >   
> > > > > > You seem to have applied the patches in some branch, but still do I
> > > > > > need to resend the whole patches?
> > > > > 
> > > > > That's up to the Platform Maintainers.
> > > > > 
> > > > > Since the MFD and ACPI are applied, you do not need to resend those.
> > > > > 
> > > > > > BTW, was patch 2/3 applied?  I miss your notification mail.
> > > > > 
> > > > > Patch 2 needs to be applied into the Platform tree.
> > > > > 
> > > > > Since there are no deps between the patches, they should be applied
> > > > > into their own trees (as previously discussed).  I only applied the
> > > > > ACPI patch because Rafael asked me nicely.  Normally this should have
> > > > > gone in separately too.
> > > > 
> > > > Andy already expressed his preference about the patch going through
> > > > MFD tree in the v5 thread.  Below is the excerpt.
> > > 
> > > If Andy is happy for me to apply the patch without an immutable
> > > branch, then I'll take it.  But as I've already said, this it
> > > non-optimal.
> > > 
> > > There is no reason why it can't be taken in via the Platform tree.
> > > Nothing depends on it and it depends on nothing, since it is new
> > > code.
> > 
> > That approach is also far from optimal, too, as Rafael and I
> > explained.
> 
> That's just my point.  This approach is optimal.
> 
> The alternative is that I (or someone else) jumps through the required
> hoops to create an immutable branch.  As a one off, it's not actually
> that big of a deal.  However, if I do it for you, I have to do it for
> every submitter, else it's not fair to them.

Lee, that's an overreaction.  No one would think that I'm special even
if you would do that :)

I can create such a branch by myself, and send you pull requests, if
it's a preferred way.  That's no problem.  It'd be much less time than
discussing in a too lengthy thread, honestly speaking.  But maybe the
problem isn't that...

> MFD patch-sets inherently cross subsystem boundaries, which means I
> would end up taking many more patches than I do already.  Subsequently
> the per-cycle MFD pull-request exponentially grows in size, as does my
> work load.

Yeah, I understand that.  OTOH, I don't understand the reason to
refuse the IB as much possible -- there are several ways to manage
that more easily.

For example, you can keep a persistent branch that can be branched off
at any time for a new IB, while keeping another branch for regular,
rather unstable patch applications.  For linux-next, you can provide
the temporary merged branch, too.  It's a way some trees deploy.

> This is the way we've been working for years, and it works really
> well.  I'm not about to change something which isn't broken, just to
> avoid the really tiny corner-case you described before.

I'd disagree about it being a tiny corner-case.  It's fundamental to
provide a solid code basis which user can test / development on.  If
we do release kernels more frequently, it shouldn't be a problem.
(e.g. for a fix between RC's, it's fine to merge through individual
trees.)  But if the merge will be done first after 3 months, no one
can guarantee what would happen in these 3 months.  That's why we need 
the solid merge point to begin with.  It allows a way to debug for
potential breakage after that point.


thanks,

Takashi



[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux