On Thu, 07 Sep 2017, Takashi Iwai wrote: > On Tue, 05 Sep 2017 10:54:49 +0200, > Lee Jones wrote: > > > > On Tue, 05 Sep 2017, Takashi Iwai wrote: > > > > > On Tue, 05 Sep 2017 10:10:49 +0200, > > > Lee Jones wrote: > > > > > > > > On Tue, 05 Sep 2017, Takashi Iwai wrote: > > > > > > > > > On Tue, 05 Sep 2017 09:24:51 +0200, > > > > > Lee Jones wrote: > > > > > > > > > > > > On Mon, 04 Sep 2017, Takashi Iwai wrote: > > > > > > > > > > > > > This patch adds the MFD driver for Dollar Cove (TI version) PMIC with > > > > > > > ACPI INT33F5 that is found on some Intel Cherry Trail devices. > > > > > > > The driver is based on the original work by Intel, found at: > > > > > > > https://github.com/01org/ProductionKernelQuilts > > > > > > > > > > > > > > This is a minimal version for adding the basic resources. Currently, > > > > > > > only ACPI PMIC opregion and the external power-button are used. > > > > > > > > > > > > > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891 > > > > > > > Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> > > > > > > > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> > > > > > > > Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> > > > > > > > --- > > > > > > > v4->v5: > > > > > > > * Minor coding-style fixes suggested by Lee > > > > > > > * Put GPL text > > > > > > > v3->v4: > > > > > > > * no change for this patch > > > > > > > v2->v3: > > > > > > > * Rename dc_ti with chtdc_ti in all places > > > > > > > * Driver/kconfig renames accordingly > > > > > > > * Added acks by Andy and Mika > > > > > > > v1->v2: > > > > > > > * Minor cleanups as suggested by Andy > > > > > > > > > > > > > > drivers/mfd/Kconfig | 13 +++ > > > > > > > drivers/mfd/Makefile | 1 + > > > > > > > drivers/mfd/intel_soc_pmic_chtdc_ti.c | 184 ++++++++++++++++++++++++++++++++++ > > > > > > > 3 files changed, 198 insertions(+) > > > > > > > create mode 100644 drivers/mfd/intel_soc_pmic_chtdc_ti.c > > > > > > > > > > > > For my own reference: > > > > > > Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx> > > > > > > > > > > Thanks! > > > > > > > > > > Now the question is how to deal with these. It's no critical things, > > > > > so I'm OK to postpone for 4.15. OTOH, it's really a new > > > > > device-specific stuff, thus it can't break anything else, and it'd be > > > > > fairly safe to add it for 4.14 although it's at a bit late stage. > > > > > > > > Yes, you are over 2 weeks late for v4.14. It will have to be v4.15. > > > > > > OK, I'll ring your bells again once when 4.15 development is opened. > > > > Please don't. Just collect all the Acks you have received and sent > > out the set again changing [PATCH] for [RESEND]. Only if there > > haven't been any code changes of course. > > You seem to have applied the patches in some branch, but still do I > need to resend the whole patches? That's up to the Platform Maintainers. Since the MFD and ACPI are applied, you do not need to resend those. > BTW, was patch 2/3 applied? I miss your notification mail. Patch 2 needs to be applied into the Platform tree. Since there are no deps between the patches, they should be applied into their own trees (as previously discussed). I only applied the ACPI patch because Rafael asked me nicely. Normally this should have gone in separately too. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
