Hi,
On 06-04-17 13:03, Andy Shevchenko wrote:
On Thu, 2017-04-06 at 09:24 +0200, Hans de Goede wrote:
The INT33FE ACPI device has a CRS table with I2cSerialBusV2 resources
for
3 devices: Maxim MAX17047 Fuel Gauge Controller, FUSB302 USB Type-C
Controller and PI3USB30532 USB switch.
This commit adds a driver for this ACPI device which instantiates
i2c-clients for these, so that the standard i2c drivers for these
chips
can bind to the them.
Given one more thought, if the devices should be present all to make it
work, than you perhaps may use component framework.
Actually the fuel-guage is completely independent, the PI3USB30532 USB
switch will get set based on extcon cable events from the FUSB302 USB
Type-C controller, but otherwise both drivers are independent and the
FUSB302 USB Type-C controller pretty much operates stand-alone.
In this case this so called "pseudo" device is not so pseudo, but
"master".
I think this is really some Windows weirdness, if I configure the BIOS
to boot "Android" the ACPI INT33FE device goes away and instead I
get 3 separate ACPI devices for the 3 chips.
Regards,
Hans
