Hi,
Thank you for your work in the sony-laptop kernel module.
I have a Vaio SVS13A15GLB laptop, and today tried the module in the
kernel version 3.10-rc2, that allows reading back the status of the
"gfx" switch.
But in my laptop, when the switch is in the STAMINA position, the
driver reports "speed", and in the "SPEED" position, reports "stamina"
:-(
Reading the status produced the following log in dmesg, with "debug=1":
In SPEED position:
[30084.337256] sony_laptop: found handle 0x015b (offset: 0x05)
[30084.337613] sony_laptop: __call_snc_method: [SN07:0x0000000000000005]
[30084.337618] sony_laptop: called SN07 with 0x0005 (result: 0x0000)
In STAMINA position:
[29976.398723] sony_laptop: found handle 0x015b (offset: 0x05)
[29976.399087] sony_laptop: __call_snc_method: [SN07:0x0000000000000005]
[29976.399092] sony_laptop: called SN07 with 0x0005 (result: 0x0001)
Reading the code, it seems that the status shown is not ok.
Attached is a patch to fix this.
Thanks,
Daniel.
Attachment:
gfx-reporting.patch
Description: Binary data
