Von: "Andreas Ahland" <Andreas.Ahland@xxxxxxxxxxxx>
An: "pjsip list" <pjsip@xxxxxxxxxxxxxxx>
Betreff: Re: Fw: Sound issues: strange samplerates?
HI Oliver,
I remember we had issues with the FritzBox as well as ours did not send the media type which was negotiated in advance. This was clearly a fault in the FritxBox. We got our setup working by using G711a only, i.E. disable G722 and G711u.
|
Mit freundlichen Grüßen Telefon : +49 251 6183-196 |
|
Von: pjsip [mailto:pjsip-bounces@xxxxxxxxxxxxxxx] Im Auftrag von Oli Kah
Gesendet: Donnerstag, 7. April 2016 01:13
An: pjsip@xxxxxxxxxxxxxxx
Betreff: Re: Fw: Sound issues: strange samplerates?
Hi Bill,
thanks for answering so promptly =)
I have created the log and yes, there seem to be lots of suspicious lines like "strm003CAB04 Bad RTP pt 0 (expecting 9)" but the rest of the log does not tell me that much and looks mostly as expected?!
The three major problems currently for me are:
- it takes much too long to really establish a call (10 seconds are not normal)
- the sound received by the callee sounds strange, as if the sample rate is wrong
- the callee is NOT heard at all on the caller's side!
Do you see what issues are there in the log that might explain this behavior? And what needs to be done to fix that?
Thank you so much!
Cheers,
Oliver
Gesendet: Mittwoch, 06. April 2016 um 22:52 Uhr
Von: "Bill Gardner" <billg@xxxxxxxxxxxx>
An: "pjsip list" <pjsip@xxxxxxxxxxxxxxx>
Betreff: Re: Fw: Sound issues: strange samplerates?
Hi Oliver,
Please generate a pjsip logfile (level 4 should suffice) and send, there may be clues in there.
Bill
On 4/6/2016 4:26 PM, Oli Kah wrote:
Hi Bill, hi everyone,
thanks for answering but I can confirm that the config_site.h settings are NOT the problem. I have now recompiled the lib with nothing in config_site.h.
The result is exactly the same.
To illustrate what the called person hears I have attached an mp4 which also shows the progress of the Python app in form of PyCharms debug log.
There are important issues that can be seen + heard. Note that I am saying "1-2-3" from the beginning(!) of the video until the very end without ever stopping. Only the receiving side can be heard voice-wise (or not as you will see/hear).
1) When picking up the phone the sound CANNOT be heard on the receiving side although I am continously saying "1-2-3". It takes roughly 10(!!) seconds before the other side can hear me at all!!
2) It also takes 10 seconds after pickup before the call confirmation phase is reached. This is extremly slow and totally unexpected.
3) When the other side finally can hear me I sound like a monster... the sample rate seems to be off - I can't otherwise explain the strange sounding voice!
The Python code of this mini app is attached to this email once more.
I don't think I am doing anything exotic. It does not work as expected though. If I do the same with an app like Phoner (see http://www.phoner.de/download_en.htm) none of these problems occur within the same environment and using the same accounts and phone numbers. So it has to do with pjsip lib somehow.
Any ideas?
Thank you.
Cheers,
Oliver
Gesendet: Montag, 04. April 2016 um 20:49 Uhr
Von: "Bill Gardner" <billg@xxxxxxxxxxxx>
An: pjsip@xxxxxxxxxxxxxxx
Betreff: Re: Fw: Sound issues: strange samplerates?Hi Oliver,
I think you should try a completely default configuration, i.e. use an empty config_site.h file. Your config_site.h params may be causing problems.
Regards,
Bill
On 4/4/2016 2:37 PM, Oli Kah wrote:
Hmmm, no one?
Is there some sort of forum somewhere where to post things like these??
Thank you :)
Cheers,
Oli
Gesendet: Freitag, 01. April 2016 um 21:38 Uhr
Von: "Oli Kah" <mj_fn@xxxxxx>
An: pjsip@xxxxxxxxxxxxxxx
Betreff: Sound issues: strange samplerates?Hi there,
I am new to this list and want to say "Hello" to everyone listening :)
My issue using pjsib is rather strange. When calling someone (I tested it using two of my own telephone numbers) I get normal audio first during early call stages and then when the call is finally confirmed the audio rate suddenly is half or so. The voice then sounds monsterish and the remote site is no longer audible via speakers. This happens every time - reproducible!
What I did:
I have successfully compiled pjsua (release build) for Python using Visual Studio 2015 Community linking pjsua to Python 2.6 lib, 32bit running everything on Windows 8.1 Pro 64bit. So far so good.
These values were used for my config_site.h:
#define PJMEDIA_CONF_USE_SWITCH_BOARD 1
#define PJMEDIA_SOUND_BUFFER_COUNT 8
#define PJMEDIA_SND_DEFAULT_REC_LATENCY 50
#define PJMEDIA_SND_DEFAULT_PLAY_LATENCY 50
The attached python code shall define a simple SIPPhone that will be used in my larger scale application. It's unfinished but I ran into these unresolvable audio problems and hope that you might help me. In its current form the SIPPhone is totally useless!
During testing I have been using the onboard audio card of my mainboard with some Bose speakers and a Samson UB-1 USB microphone which is connected to the Windows-PC using an USB 2.0 port. For the "remote" side I use a dedicated VOIP telephone from Grandstream.
The test code in my attached file is then run using Pycharm + Python 2.6 runtimes. For testing you must replace the numbers + credientials by valid values on your side. Also note that you might have to specify another domain (mine here is "fritz.box").
The called Grandstream rings. Taking up the phone then starts the call confirmation which is going unexpectedly slow. It takes quite some time (between roughly 3-10 seconds) before the "confirmed" status is reached although the audio starts working before that. The scenario is running on my LAN where the SIP server (a FritzBox) is also running here. So quite strange why this takes so long?
Right after phone pickup the audio can't be heard at all (me constantly talking after phone pickup!) - in both directions! Then after a short time (1-4 sec) the voice can be heard normally and understandably as expected in both directions. But this only works until the "confirmed" status is reached for the call. When it is reached there is no longer any sound coming from the PC speaker and the voice heard on the Grandstream is monsterish (half sample rate?!). The bidirectional audio is lost and the remaining audio is really bad.
The observed behavior happens every time. Just the timing is different and the time from starting the program to hearing the monsterish voice is between 3 and 10 seconds. It is also rather strange that this time span can be so huge!
What happens here?! In its current form the SIPPhone is pretty unusable. I hope you have ideas how to fix that :) I have experimented with many of the MediaConfig parameters with no success.
Thank you!
Cheers,
Oliver
_______________________________________________Visit our blog: http://blog.pjsip.orgpjsip mailing listpjsip@xxxxxxxxxxxxxxxhttp://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
_______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip@xxxxxxxxxxxxxxx http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
_______________________________________________Visit our blog: http://blog.pjsip.orgpjsip mailing listpjsip@xxxxxxxxxxxxxxxhttp://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
_______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip@xxxxxxxxxxxxxxx http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
SELECTRIC Nachrichten-Systeme GmbH
Haferlandweg 18
48155 Muenster
Internet:
www.selectric.de
---
Sitz der Gesellschaft (Company Premises): Muenster | Registergericht (Register Court): Amtsgericht Muenster | HRB-Nr. 1264
Geschaeftsfuehrer (General Managers): Michael Heussner, Hendrik Pieper _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip@xxxxxxxxxxxxxxx http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
_______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip@xxxxxxxxxxxxxxx http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
