Hi Gaurav, I switched back to PJSIP 1.12 and it is working the below error is coming with PJSIP 2.01. Thanks for your help. Regards Deepak Bhatia On Fri, Feb 22, 2013 at 3:11 PM, DEEPAK BHATIA <toreachdeepak at gmail.com>wrote: > Hello Gaurav, > > As suggested by Alain I installed *libasound2-dev* and recompile PJSIP > afterwards. Now I am getting that > > 15:00:36.200 pjsua_app.c ....Turning sound device ON > 15:00:36.200 pjsua_aud.c ....Opening sound device PCM at 16000/1/20ms > > Expression 'SetApproximateSampleRate( pcm, hwParams, sr )' failed in > 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1294 > Expression 'PaAlsaStreamComponent_InitialConfigure( &self->capture, > inParams, self->primeBuffers, hwParamsCapture, &realSr )' failed in > 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1870 > Expression 'PaAlsaStream_Configure( stream, inputParameters, > outputParameters, sampleRate, framesPerBuffer, &inputLatency, > &outputLatency, &hostBufferSizeMode )' failed in > 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1994 > Expression 'SetApproximateSampleRate( pcm, hwParams, sr )' failed in > 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1294 > Expression 'PaAlsaStreamComponent_InitialConfigure( &self->capture, > inParams, self->primeBuffers, hwParamsCapture, &realSr )' failed in > 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1870 > Expression 'PaAlsaStream_Configure( stream, inputParameters, > outputParameters, sampleRate, framesPerBuffer, &inputLatency, > &outputLatency, &hostBufferSizeMode )' failed in > 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1994 > 15:00:36.201 pjsua_app.c ....Turning sound device ON > 15:00:36.201 pjsua_aud.c ....Opening sound device PCM at 44100/1/20ms > 15:00:36.214 ec0xb2d11df8 .....AEC created, clock_rate=44100, > channel=1, samples per frame=882, tail length=200 ms, latency=100 ms > 15:00:36.214 conference.c ...Port 2 (ring) transmitting to port 0 (HDA > Intel: ALC1200 Analog (hw:0,0) (44KHz)) > 15:00:36.214 pjsua_app.c ..Incoming call for account 0! > Media count: 1 audio & 0 video > > > Regards > > Deepak > > On Fri, Feb 22, 2013 at 2:57 PM, Gaurav Srivastava < > gaurav.srivastava2 at agnity.com> wrote: > >> Hi Deepak, >> >> >> >> From the logs , line number 210 , it is clear PJSIP is trying >> to open device which do not exist , >> >> >> >> pjsua_aud.c ...Set sound device: capture=-1, playback=-2 >> >> pjsua_aud.c ....Error retrieving default audio device parameters: >> Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV) [status=420006] >> >> >> >> You need to check opened capture and playback devices an accordingly >> provide values in capture-dev and playback dev. >> >> >> >> But for now to test Softfone works correctly try running it on other >> machine. >> >> >> >> Regards, >> >> Gaurav >> >> >> >> >> >> -----Original Message----- >> *From:* pjsip [mailto:pjsip-bounces at lists.pjsip.org] *On Behalf Of *DEEPAK >> BHATIA >> *Sent:* Friday, February 22, 2013 2:39 PM >> *To:* pjsip list >> *Subject:* Re: [pjsip] [SPAM] PJSUA Giving Audio Device Problems >> >> >> >> Hi Gaurav, >> >> Please find the log file and the pjsua command line >> >> ./pjsua-i686-pc-linux-gnu --log-file=temp1-22-2-2013.log --log-level=6 >> --app-log-level=6 --capture-dev=-1 --playback-dev=-1 >> >> Regards >> >> Deepak Bhatia >> >> On Fri, Feb 22, 2013 at 2:27 PM, Gaurav Srivastava < >> gaurav.srivastava2 at agnity.com> wrote: >> >> Hi Deepak, >> >> >> >> Mention -1 in capture-dev and playback-dev. >> >> And still error occurs provide following switch in command >> line >> >> --log-level=6 >> >> --app-log-level=6 >> >> >> >> And share the logs that would be really helpful in debugging. >> >> >> >> Thanks and Regards, >> >> Gaurav >> >> >> >> >> >> -----Original Message----- >> *From:* pjsip [mailto:pjsip-bounces at lists.pjsip.org] *On Behalf Of *DEEPAK >> BHATIA >> >> *Sent:* Friday, February 22, 2013 2:18 PM >> *To:* pjsip list >> *Subject:* Re: [pjsip] [SPAM] PJSUA Giving Audio Device Problems >> >> >> >> Hi Khoa, >> >> Yes, I have tested the microphone and speaker on my machine and they are >> working fine. >> >> Regards >> >> Deepak >> >> On Fri, Feb 22, 2013 at 2:12 PM, Khoa Pham <onmyway133 at gmail.com> wrote: >> >> *@DEEPAK BHATIA* >> >> >> >> When first using pjsip, I encountered this error "Unable to find default >> audio device". >> >> >> >> First, check if you have connect microphone to your computer >> >> Second, trace where that error message come from, and check >> >> Third, read http://trac.pjsip.org/repos/wiki/sound-problems for more >> information >> >> >> >> On Fri, Feb 22, 2013 at 3:35 PM, DEEPAK BHATIA <toreachdeepak at gmail.com> >> wrote: >> >> Hi Gaurav, >> >> I didn't set any --capture-dev and --playback-dev >> >> Also aplay -L command gives the following output >> >> [root at localhost bin]# aplay -L >> default >> Default >> sysdefault:CARD=Intel >> HDA Intel, ALC1200 Analog >> Default Audio Device >> front:CARD=Intel,DEV=0 >> HDA Intel, ALC1200 Analog >> Front speakers >> surround40:CARD=Intel,DEV=0 >> HDA Intel, ALC1200 Analog >> 4.0 Surround output to Front and Rear speakers >> surround41:CARD=Intel,DEV=0 >> HDA Intel, ALC1200 Analog >> 4.1 Surround output to Front, Rear and Subwoofer speakers >> surround50:CARD=Intel,DEV=0 >> HDA Intel, ALC1200 Analog >> 5.0 Surround output to Front, Center and Rear speakers >> surround51:CARD=Intel,DEV=0 >> HDA Intel, ALC1200 Analog >> 5.1 Surround output to Front, Center, Rear and Subwoofer speakers >> surround71:CARD=Intel,DEV=0 >> HDA Intel, ALC1200 Analog >> 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers >> iec958:CARD=Intel,DEV=0 >> HDA Intel, ALC1200 Digital >> IEC958 (S/PDIF) Digital Audio Output >> >> >> >> On Fri, Feb 22, 2013 at 1:57 PM, Gaurav Srivastava < >> gaurav.srivastava2 at agnity.com> wrote: >> >> Deepak, >> >> >> >> My question was which value u provides for >> >> --capture-dev= >> >> --playback-dev= >> >> >> >> Check which alsa snd device is used for audio and provide its number >> against the switches I mentioned. >> >> >> >> By default it is -1 but I think in your system default >> devices are not used for audio. >> >> >> >> If you are still facing any issue please drop the exact steps >> used to run Softphone >> >> >> >> Thanks and Regards, >> >> Gaurav >> >> -----Original Message----- >> *From:* pjsip [mailto:pjsip-bounces at lists.pjsip.org] *On Behalf Of *DEEPAK >> BHATIA >> >> *Sent:* Friday, February 22, 2013 1:30 PM >> >> >> *To:* pjsip list >> *Subject:* Re: [pjsip] [SPAM] PJSUA Giving Audio Device Problems >> >> >> >> >> http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/2010-August/011390.html >> >> >* 16:14:15.522 pa_dev.c PortAudio sound library initialized, status=0* >> >> >* 16:14:15.522 pa_dev.c PortAudio host api count=1* >> >> >> >> >> >> >* 16:14:15.522 pa_dev.c Sound device count=0* >> >> >> >> PortAudio not found any sound device... >> >> >> >> >> >> >> >> >> >> >> Could this be the reason.... >> >> >> >> On Fri, Feb 22, 2013 at 1:09 PM, DEEPAK BHATIA <toreachdeepak at gmail.com> >> wrote: >> >> Hi Gaurav, >> >> Thanks for the prompt response. >> >> >>>+a >> Your SIP URL: (empty to cancel): sip:100 at xxx.xxx.xxx.xxx >> URL of the registrar: (empty to cancel): sip:xx.xxx.xxx.xxx >> Auth Realm: (empty to cancel): asterisk >> Auth Username: (empty to cancel): 100 >> Auth Password: (empty to cancel): 100 >> >> Also arecord and aply are working fine. Just to add, I had skype also >> installed which I removed, which I guess had captured the audio device. >> >> Regards >> >> Deepak >> >> On Fri, Feb 22, 2013 at 12:49 PM, Gaurav Srivastava < >> gaurav.srivastava2 at agnity.com> wrote: >> >> Hi Deepak, >> >> >> >> Please share the command line switches and their values >> provided to run Softphone(PJSUA). >> >> One more thing check with arecord and aplay to check whether >> there exist support for Audio Recorder and player in your machine. >> >> >> >> >> >> Thanks and Regards, >> >> Gaurav >> >> -----Original Message----- >> *From:* pjsip [mailto:pjsip-bounces at lists.pjsip.org] *On Behalf Of *DEEPAK >> BHATIA >> *Sent:* Friday, February 22, 2013 12:44 PM >> *To:* pjsip at lists.pjsip.org >> *Subject:* [SPAM] [pjsip] PJSUA Giving Audio Device Problems >> >> >> >> Hi, >> >> I have installed PJSIP 1.12 on the Linux and I am able to connect two >> softphones but the softphone (PJSUA) on the Linux gives the following >> errors. Please help me in resolving this error. >> >> >> ====================================================================================================================== >> >> 20:29:34.153 pjsua_media.c Error retrieving default audio device >> parameters: Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV) >> [status=420006] >> 20:29:34.153 pjsua_media.c Error opening sound device: Unable to find >> default audio device (PJMEDIA_EAUD_NODEFDEV) [status=420006] >> >> >> ====================================================================================================================== >> >> Regards >> >> Deepak Bhatia >> >> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> >> -- >> Khoa Pham >> HCMC University of Science >> Faculty of Information Technology >> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20130222/fb4312e7/attachment-0001.html>
