Hello Gaurav, As suggested by Alain I installed *libasound2-dev* and recompile PJSIP afterwards. Now I am getting that 15:00:36.200 pjsua_app.c ....Turning sound device ON 15:00:36.200 pjsua_aud.c ....Opening sound device PCM at 16000/1/20ms Expression 'SetApproximateSampleRate( pcm, hwParams, sr )' failed in 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1294 Expression 'PaAlsaStreamComponent_InitialConfigure( &self->capture, inParams, self->primeBuffers, hwParamsCapture, &realSr )' failed in 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1870 Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1994 Expression 'SetApproximateSampleRate( pcm, hwParams, sr )' failed in 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1294 Expression 'PaAlsaStreamComponent_InitialConfigure( &self->capture, inParams, self->primeBuffers, hwParamsCapture, &realSr )' failed in 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1870 Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/../../../portaudio/src/hostapi/alsa/pa_linux_alsa.c', line: 1994 15:00:36.201 pjsua_app.c ....Turning sound device ON 15:00:36.201 pjsua_aud.c ....Opening sound device PCM at 44100/1/20ms 15:00:36.214 ec0xb2d11df8 .....AEC created, clock_rate=44100, channel=1, samples per frame=882, tail length=200 ms, latency=100 ms 15:00:36.214 conference.c ...Port 2 (ring) transmitting to port 0 (HDA Intel: ALC1200 Analog (hw:0,0) (44KHz)) 15:00:36.214 pjsua_app.c ..Incoming call for account 0! Media count: 1 audio & 0 video Regards Deepak On Fri, Feb 22, 2013 at 2:57 PM, Gaurav Srivastava < gaurav.srivastava2 at agnity.com> wrote: > Hi Deepak, > > > > From the logs , line number 210 , it is clear PJSIP is trying > to open device which do not exist , > > > > pjsua_aud.c ...Set sound device: capture=-1, playback=-2 > > pjsua_aud.c ....Error retrieving default audio device parameters: > Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV) [status=420006] > > > > You need to check opened capture and playback devices an accordingly > provide values in capture-dev and playback dev. > > > > But for now to test Softfone works correctly try running it on other > machine. > > > > Regards, > > Gaurav > > > > > > -----Original Message----- > *From:* pjsip [mailto:pjsip-bounces at lists.pjsip.org] *On Behalf Of *DEEPAK > BHATIA > *Sent:* Friday, February 22, 2013 2:39 PM > *To:* pjsip list > *Subject:* Re: [pjsip] [SPAM] PJSUA Giving Audio Device Problems > > > > Hi Gaurav, > > Please find the log file and the pjsua command line > > ./pjsua-i686-pc-linux-gnu --log-file=temp1-22-2-2013.log --log-level=6 > --app-log-level=6 --capture-dev=-1 --playback-dev=-1 > > Regards > > Deepak Bhatia > > On Fri, Feb 22, 2013 at 2:27 PM, Gaurav Srivastava < > gaurav.srivastava2 at agnity.com> wrote: > > Hi Deepak, > > > > Mention -1 in capture-dev and playback-dev. > > And still error occurs provide following switch in command > line > > --log-level=6 > > --app-log-level=6 > > > > And share the logs that would be really helpful in debugging. > > > > Thanks and Regards, > > Gaurav > > > > > > -----Original Message----- > *From:* pjsip [mailto:pjsip-bounces at lists.pjsip.org] *On Behalf Of *DEEPAK > BHATIA > > *Sent:* Friday, February 22, 2013 2:18 PM > *To:* pjsip list > *Subject:* Re: [pjsip] [SPAM] PJSUA Giving Audio Device Problems > > > > Hi Khoa, > > Yes, I have tested the microphone and speaker on my machine and they are > working fine. > > Regards > > Deepak > > On Fri, Feb 22, 2013 at 2:12 PM, Khoa Pham <onmyway133 at gmail.com> wrote: > > *@DEEPAK BHATIA* > > > > When first using pjsip, I encountered this error "Unable to find default > audio device". > > > > First, check if you have connect microphone to your computer > > Second, trace where that error message come from, and check > > Third, read http://trac.pjsip.org/repos/wiki/sound-problems for more > information > > > > On Fri, Feb 22, 2013 at 3:35 PM, DEEPAK BHATIA <toreachdeepak at gmail.com> > wrote: > > Hi Gaurav, > > I didn't set any --capture-dev and --playback-dev > > Also aplay -L command gives the following output > > [root at localhost bin]# aplay -L > default > Default > sysdefault:CARD=Intel > HDA Intel, ALC1200 Analog > Default Audio Device > front:CARD=Intel,DEV=0 > HDA Intel, ALC1200 Analog > Front speakers > surround40:CARD=Intel,DEV=0 > HDA Intel, ALC1200 Analog > 4.0 Surround output to Front and Rear speakers > surround41:CARD=Intel,DEV=0 > HDA Intel, ALC1200 Analog > 4.1 Surround output to Front, Rear and Subwoofer speakers > surround50:CARD=Intel,DEV=0 > HDA Intel, ALC1200 Analog > 5.0 Surround output to Front, Center and Rear speakers > surround51:CARD=Intel,DEV=0 > HDA Intel, ALC1200 Analog > 5.1 Surround output to Front, Center, Rear and Subwoofer speakers > surround71:CARD=Intel,DEV=0 > HDA Intel, ALC1200 Analog > 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers > iec958:CARD=Intel,DEV=0 > HDA Intel, ALC1200 Digital > IEC958 (S/PDIF) Digital Audio Output > > > > On Fri, Feb 22, 2013 at 1:57 PM, Gaurav Srivastava < > gaurav.srivastava2 at agnity.com> wrote: > > Deepak, > > > > My question was which value u provides for > > --capture-dev= > > --playback-dev= > > > > Check which alsa snd device is used for audio and provide its number > against the switches I mentioned. > > > > By default it is -1 but I think in your system default devices > are not used for audio. > > > > If you are still facing any issue please drop the exact steps > used to run Softphone > > > > Thanks and Regards, > > Gaurav > > -----Original Message----- > *From:* pjsip [mailto:pjsip-bounces at lists.pjsip.org] *On Behalf Of *DEEPAK > BHATIA > > *Sent:* Friday, February 22, 2013 1:30 PM > > > *To:* pjsip list > *Subject:* Re: [pjsip] [SPAM] PJSUA Giving Audio Device Problems > > > > > http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/2010-August/011390.html > > >* 16:14:15.522 pa_dev.c PortAudio sound library initialized, status=0* > > >* 16:14:15.522 pa_dev.c PortAudio host api count=1* > > > > > > >* 16:14:15.522 pa_dev.c Sound device count=0* > > > > PortAudio not found any sound device... > > > > > > > > > > Could this be the reason.... > > > > On Fri, Feb 22, 2013 at 1:09 PM, DEEPAK BHATIA <toreachdeepak at gmail.com> > wrote: > > Hi Gaurav, > > Thanks for the prompt response. > > >>>+a > Your SIP URL: (empty to cancel): sip:100 at xxx.xxx.xxx.xxx > URL of the registrar: (empty to cancel): sip:xx.xxx.xxx.xxx > Auth Realm: (empty to cancel): asterisk > Auth Username: (empty to cancel): 100 > Auth Password: (empty to cancel): 100 > > Also arecord and aply are working fine. Just to add, I had skype also > installed which I removed, which I guess had captured the audio device. > > Regards > > Deepak > > On Fri, Feb 22, 2013 at 12:49 PM, Gaurav Srivastava < > gaurav.srivastava2 at agnity.com> wrote: > > Hi Deepak, > > > > Please share the command line switches and their values > provided to run Softphone(PJSUA). > > One more thing check with arecord and aplay to check whether > there exist support for Audio Recorder and player in your machine. > > > > > > Thanks and Regards, > > Gaurav > > -----Original Message----- > *From:* pjsip [mailto:pjsip-bounces at lists.pjsip.org] *On Behalf Of *DEEPAK > BHATIA > *Sent:* Friday, February 22, 2013 12:44 PM > *To:* pjsip at lists.pjsip.org > *Subject:* [SPAM] [pjsip] PJSUA Giving Audio Device Problems > > > > Hi, > > I have installed PJSIP 1.12 on the Linux and I am able to connect two > softphones but the softphone (PJSUA) on the Linux gives the following > errors. Please help me in resolving this error. > > > ====================================================================================================================== > > 20:29:34.153 pjsua_media.c Error retrieving default audio device > parameters: Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV) > [status=420006] > 20:29:34.153 pjsua_media.c Error opening sound device: Unable to find > default audio device (PJMEDIA_EAUD_NODEFDEV) [status=420006] > > > ====================================================================================================================== > > Regards > > Deepak Bhatia > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > -- > Khoa Pham > HCMC University of Science > Faculty of Information Technology > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20130222/3aca30bf/attachment-0001.html>
