Hello Itn't there someone that knows something about this subject, just a hint maybe Best Regards Kresten Tolstrup -------- Oprindelig meddelelse -------- Subject: Hook flash Date: Wed, 31 Oct 2012 12:51:23 +0100 From: Kresten Tolstrup <kt@xxxxxxxxxxxx> To: PJSIP <pjsip at lists.pjsip.org> Hello Is it possible to send a hook-flash from pjsip, if it is how is it done? A hook flash is event 16 in RFC2833 I am using a gateway AudioCodec MP-114, where I want to send a hook-flash to. The following is from the manual to the gateway: If the FXO receives a hook-flash from the IP side (using out-ofband or RFC 2833), the device sends the hook-flash to the Tel side by performing one of the following: . Performing a hook flash (i.e., on-hook and off-hook) . Sending a hook-flash code (defined by the ini file parameter HookFlashCode) The PBX may generate a dial tone that is sent to the IP, and the IP side may dial digits of a new destination. Best Regards Kresten Tolstrup -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20121107/5779b68c/attachment-0001.html>
