I used gmake (instead of make). Worked like a charm. Install macports (www.macports.org) Then sudo port install gmake Cheers, --Raunak On Tue, Apr 12, 2011 at 12:38 PM, Jorge <gusa.mlbb at gmail.com> wrote: > Hello: > > Could you try doing "make clean all" ? It deletes all the *.o . > > And then "make dep" and after "make". > > I don't know if it is going to do something, but you could try. Sorry, but > I think my knowledge it is not so deep. > > Regards > > Jorge > > > 2011/4/12 Fabian Bernhard <fbernhard at gmail.com> > >> Hello Jorge >> >> Thank you for your reply! >> >>> >>> I am not sure but, have you closed the compiler when it was compiling? >>> >>> Not that I am aware of it. I compile from command line and the >> compilation terminates by itself. >> >> >> >>> I think that you have interrupted the compiler and it created a bad .dep >>> . >>> >>> >> Whats very strange is this: >> >> fabian at orion-2:/opt/pjproject$ cat >> pjlib/build/.pjlib-i386-apple-darwin10.7.0.depend >> >> output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/output/pjlib-i386-apple-darwin10.7.0/ >> >> This is after "make dep" and before "make". Something must be wrong in >> make dep I assume. But what? >> >> >>> Could you try removing all the *.dep and compiling again? Try to remove >>> .pjlib-i386-apple-darwin10.7. >>> 0.depend this one and recompile. Take in account that the point before >>> the name means that you could not see if you didn't selected the proper >>> instruction. >>> >>> >> fabian at orion-2:/opt/pjproject$ for i in $( find . | grep .depend$ ); do >> rm $i; done; >> fabian at orion-2:/opt/pjproject$ make dep && make >> >> has the same result. >> >> If I only remove ".pjlib-i386-apple-darwin10.7.depend" and compile without >> "make dep" first, I have these results: >> >> a - output/pjlib-i386-apple-darwin10.7.0/ioqueue_select.o >> ar: output/pjlib-i386-apple-darwin10.7.0/ioqueue_select.o: No such file or >> directory >> a - output/pjlib-i386-apple-darwin10.7.0/file_access_unistd.o >> ar: output/pjlib-i386-apple-darwin10.7.0/file_access_unistd.o: No such >> file or directory >> [...] >> a - output/pjlib-i386-apple-darwin10.7.0/timer.o >> ar: output/pjlib-i386-apple-darwin10.7.0/timer.o: No such file or >> directory >> a - output/pjlib-i386-apple-darwin10.7.0/types.o >> ar: output/pjlib-i386-apple-darwin10.7.0/types.o: No such file or >> directory >> make[2]: *** [../lib/libpj-i386-apple-darwin10.7.0.a] Error 1 >> make[1]: *** [pjlib] Error 2 >> make: *** [all] Error 1 >> >> Thank you for your help! >> >> Fabian >> >> >> >>> >>> System information >>> ---------------------------- >>> OSX 10.6.7 >>> >>> fabian at orion-2:/opt$ uname -a >>> Darwin orion-2.local 10.7.0 Darwin Kernel Version 10.7.0: Sat Jan 29 >>> 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386 i386 >>> >>> fabian at orion-2:/opt$ make --version >>> GNU Make 3.81 >>> Copyright (C) 2006 Free Software Foundation, Inc. >>> This is free software; see the source for copying conditions. >>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A >>> PARTICULAR PURPOSE. >>> >>> This program built for i386-apple-darwin10.0 >>> >>> Compile information >>> ---------------------------- >>> fabian at orion-2:/opt$ svn co http://svn.pjsip.org/repos/pjproject/trunkpjproject >>> >>> fabian at orion-2:/opt/pjproject$ cat user.mak >>> # You can create user.mak file in PJ root directory to specify >>> # additional flags to compiler and linker. For example: >>> export CFLAGS += -Wno-unused-label -Werror -O2 -arch i386 -arch x86_64 >>> export LDFLAGS += >>> >>> >>> fabian at orion-2:/opt/pjproject$ ./configure >>> checking build system type... i386-apple-darwin10.7.0 >>> checking host system type... i386-apple-darwin10.7.0 >>> checking target system type... i386-apple-darwin10.7.0 >>> checking for gcc... gcc >>> checking whether the C compiler works... yes >>> checking for C compiler default output file name... a.out >>> checking for suffix of executables... >>> checking whether we are cross compiling... no >>> checking for suffix of object files... o >>> checking whether we are using the GNU C compiler... yes >>> checking whether gcc accepts -g... yes >>> checking for gcc option to accept ISO C89... none needed >>> checking for g++... g++ >>> checking whether we are using the GNU C++ compiler... yes >>> checking whether g++ accepts -g... yes >>> checking for pthread_create in -lpthread... yes >>> checking for puts in -lwsock32... no >>> checking for puts in -lws2_32... no >>> checking for puts in -lole32... no >>> checking for puts in -lwinmm... no >>> checking for puts in -lsocket... no >>> checking for puts in -lrt... no >>> checking for puts in -lnsl... no >>> checking for uuid_generate in -luuid... no >>> checking for uuid_generate in -luuid... (cached) no >>> Setting PJ_M_NAME to i386 >>> checking memory alignment... 4 bytes (default) >>> checking how to run the C preprocessor... gcc -E >>> checking for grep that handles long lines and -e... /usr/bin/grep >>> checking for egrep... /usr/bin/grep -E >>> checking for ANSI C header files... yes >>> checking for sys/types.h... yes >>> checking for sys/stat.h... yes >>> checking for stdlib.h... yes >>> checking for string.h... yes >>> checking for memory.h... yes >>> checking for strings.h... yes >>> checking for inttypes.h... yes >>> checking for stdint.h... yes >>> checking for unistd.h... yes >>> checking whether byte ordering is bigendian... no >>> Checking if floating point is disabled... no >>> checking for fmod in -lm... yes >>> checking arpa/inet.h usability... yes >>> checking arpa/inet.h presence... yes >>> checking for arpa/inet.h... yes >>> checking assert.h usability... yes >>> checking assert.h presence... yes >>> checking for assert.h... yes >>> checking ctype.h usability... yes >>> checking ctype.h presence... yes >>> checking for ctype.h... yes >>> checking errno.h usability... yes >>> checking errno.h presence... yes >>> checking for errno.h... yes >>> checking fcntl.h usability... yes >>> checking fcntl.h presence... yes >>> checking for fcntl.h... yes >>> checking linux/socket.h usability... no >>> checking linux/socket.h presence... no >>> checking for linux/socket.h... no >>> checking limits.h usability... yes >>> checking limits.h presence... yes >>> checking for limits.h... yes >>> checking malloc.h usability... no >>> checking malloc.h presence... no >>> checking for malloc.h... no >>> checking netdb.h usability... yes >>> checking netdb.h presence... yes >>> checking for netdb.h... yes >>> checking netinet/in_systm.h usability... yes >>> checking netinet/in_systm.h presence... yes >>> checking for netinet/in_systm.h... yes >>> checking netinet/in.h usability... yes >>> checking netinet/in.h presence... yes >>> checking for netinet/in.h... yes >>> checking for netinet/ip.h... yes >>> checking netinet/tcp.h usability... yes >>> checking netinet/tcp.h presence... yes >>> checking for netinet/tcp.h... yes >>> checking ifaddrs.h usability... yes >>> checking ifaddrs.h presence... yes >>> checking for ifaddrs.h... yes >>> checking for getifaddrs... yes >>> checking semaphore.h usability... yes >>> checking semaphore.h presence... yes >>> checking for semaphore.h... yes >>> checking setjmp.h usability... yes >>> checking setjmp.h presence... yes >>> checking for setjmp.h... yes >>> checking stdarg.h usability... yes >>> checking stdarg.h presence... yes >>> checking for stdarg.h... yes >>> checking stddef.h usability... yes >>> checking stddef.h presence... yes >>> checking for stddef.h... yes >>> checking stdio.h usability... yes >>> checking stdio.h presence... yes >>> checking for stdio.h... yes >>> checking for stdint.h... (cached) yes >>> checking for stdlib.h... (cached) yes >>> checking for string.h... (cached) yes >>> checking sys/ioctl.h usability... yes >>> checking sys/ioctl.h presence... yes >>> checking for sys/ioctl.h... yes >>> checking sys/select.h usability... yes >>> checking sys/select.h presence... yes >>> checking for sys/select.h... yes >>> checking sys/socket.h usability... yes >>> checking sys/socket.h presence... yes >>> checking for sys/socket.h... yes >>> checking sys/time.h usability... yes >>> checking sys/time.h presence... yes >>> checking for sys/time.h... yes >>> checking sys/timeb.h usability... yes >>> checking sys/timeb.h presence... yes >>> checking for sys/timeb.h... yes >>> checking for sys/types.h... (cached) yes >>> checking sys/filio.h usability... yes >>> checking sys/filio.h presence... yes >>> checking for sys/filio.h... yes >>> checking sys/sockio.h usability... yes >>> checking sys/sockio.h presence... yes >>> checking for sys/sockio.h... yes >>> checking sys/utsname.h usability... yes >>> checking sys/utsname.h presence... yes >>> checking for sys/utsname.h... yes >>> checking time.h usability... yes >>> checking time.h presence... yes >>> checking for time.h... yes >>> checking for unistd.h... (cached) yes >>> checking winsock.h usability... no >>> checking winsock.h presence... no >>> checking for winsock.h... no >>> checking winsock2.h usability... no >>> checking winsock2.h presence... no >>> checking for winsock2.h... no >>> checking for mswsock.h... no >>> checking ws2tcpip.h usability... no >>> checking ws2tcpip.h presence... no >>> checking for ws2tcpip.h... no >>> checking uuid/uuid.h usability... yes >>> checking uuid/uuid.h presence... yes >>> checking for uuid/uuid.h... yes >>> checking for net/if.h... yes >>> Setting PJ_OS_NAME to i386-apple-darwin10.7.0 >>> Setting PJ_HAS_ERRNO_VAR to 1 >>> Setting PJ_HAS_HIGH_RES_TIMER to 1 >>> Setting PJ_HAS_MALLOC to 1 >>> Setting PJ_NATIVE_STRING_IS_UNICODE to 0 >>> Setting PJ_ATOMIC_VALUE_TYPE to long >>> checking if inet_aton() is available... yes >>> checking if inet_pton() is available... yes >>> checking if inet_ntop() is available... yes >>> checking if getaddrinfo() is available... yes >>> checking if sockaddr_in has sin_len member... yes >>> checking if socklen_t is available... yes >>> checking if SO_ERROR is available... yes >>> checking if pthread_rwlock_t is available... yes >>> checking if pthread_mutexattr_settype() is available... no >>> checking if pthread_mutexattr_t has recursive member... no >>> checking ioqueue backend... select() >>> checking sys/soundcard.h usability... no >>> checking sys/soundcard.h presence... no >>> checking for sys/soundcard.h... no >>> checking linux/soundcard.h usability... no >>> checking linux/soundcard.h presence... no >>> checking for linux/soundcard.h... no >>> checking machine/soundcard.h usability... no >>> checking machine/soundcard.h presence... no >>> checking for machine/soundcard.h... no >>> Checking sound device backend... coreaudio >>> Checking if small filter is disabled... no >>> Checking if large filter is disabled... no >>> Checking if Speex AEC is disabled...no >>> Checking if G.711 codec is disabled...no >>> Checking if L16 codec is disabled...no >>> Checking if GSM codec is disabled...no >>> Checking if G.722 codec is disabled...no >>> Checking if G.722.1 codec is disabled...no >>> Checking if Speex codec is disabled...no >>> Checking if iLBC codec is disabled...no >>> Skipping libsamplerate detection >>> Skipping Intel IPP settings (not wanted) >>> checking for OpenSSL installations.. >>> checking openssl/ssl.h usability... yes >>> checking openssl/ssl.h presence... yes >>> checking for openssl/ssl.h... yes >>> checking for ERR_load_BIO_strings in -lcrypto... yes >>> checking for SSL_library_init in -lssl... yes >>> OpenSSL library found, SSL support enabled >>> checking if select() needs correct nfds... no (default) >>> ** Decided that select() doesn't need correct nfds (please check) >>> checking if pj_thread_create() should enforce stack size... no (default) >>> checking if pj_thread_create() should allocate stack... no (default) >>> ** Setting non-blocking recv() retval to EAGAIN (please check) >>> ** Setting non-blocking connect() retval to EINPROGRESS (please check) >>> aconfigure: creating ./config.status >>> config.status: creating build.mak >>> config.status: creating build/os-auto.mak >>> config.status: creating build/cc-auto.mak >>> config.status: creating pjlib/build/os-auto.mak >>> config.status: creating pjlib-util/build/os-auto.mak >>> config.status: creating pjmedia/build/os-auto.mak >>> config.status: creating pjsip/build/os-auto.mak >>> config.status: creating third_party/build/os-auto.mak >>> config.status: creating third_party/build/portaudio/os-auto.mak >>> config.status: creating pjlib/include/pj/compat/os_auto.h >>> config.status: creating pjlib/include/pj/compat/m_auto.h >>> config.status: creating pjmedia/include/pjmedia/config_auto.h >>> config.status: creating pjmedia/include/pjmedia-codec/config_auto.h >>> config.status: creating pjsip/include/pjsip/sip_autoconf.h >>> >>> >>> Configurations for current target have been written to 'build.mak', and >>> 'os-auto.mak' in various build directories, and >>> pjlib/include/pj/compat/os_auto.h. >>> >>> Further customizations can be put in: >>> - 'user.mak' >>> - 'pjlib/include/pj/config_site.h' >>> >>> The next step now is to run 'make dep' and 'make'. >>> >>> fabian at orion-2:/opt/pjproject$ make dep >>> >>> [?] >>> LOTS OF THESE: >>> >>> gcc-4.2: -E, -S, -save-temps and -M options are not allowed with multiple >>> -arch flags >>> [?] >>> >>> fabian at orion-2:/opt/pjproject$ make >>> for dir in pjlib/build pjlib-util/build pjnath/build third_party/build >>> pjmedia/build pjsip/build pjsip-apps/build ; do \ >>> if make -C $dir all; then \ >>> true; \ >>> else \ >>> exit 1; \ >>> fi; \ >>> done >>> make -f /opt/pjproject/build/rules.mak APP=PJLIB app=pjlib >>> ../lib/libpj-i386-apple-darwin10.7.0.a >>> .pjlib-i386-apple-darwin10.7.0.depend:1: *** missing separator. Stop. >>> make[1]: *** [pjlib] Error 2 >>> make: *** [all] Error 1 >>> >>> >>> >>> >>> _______________________________________________ >>> Visit our blog: http://blog.pjsip.org >>> >>> pjsip mailing list >>> pjsip at lists.pjsip.org >>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>> >>> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -- Raunak Poddar -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20110412/8cb6d492/attachment-0001.html>
