Hey, I'm not very sure of this, but maybe you can try. The pjsua has all the header functions in the file ( C:/pjproject-1.3/pjsip/src/pjsip-ua ) Inside this location you'll find a file called sip_regc.c. This file has all header definition and etc etc. If you can just try adding the transport parameter. Thanks! On Wed, Sep 9, 2009 at 6:41 AM, Evgeny Miloslavsky <emiloslavsky at juniper.net > wrote: > Hi All! > > > > I need transport parameter to be concatenated to SIP-URI at Contact header > of REISTER request sent as PjSUA starts. As I understood from tool's > manual, CLI command *./pjsua-i686-pc-linux-gnu --ip-addr=IP-ADDDR > --local-port=5060 --null-audio --duration=30 --outbound=sip:IPADDR1 > --registrar=sip:IPADDR2:5060--id=sip:1000 at IPADDR --contact=sip:1000 at IPADDR;transport=UDP > --contact-params=transport=UDP* will cause to PJSUA to send REGISTER > request toward registrar through it?s outbound defined. > > The problem is that Contact header of REGISTER request sent, has no > transport parameter (transport=UDP) at all. I know that UDP is a default > transport but I want it to appear at Contact header. > > > > Please advice. > > > > Regards, > > Evgeny Miloslavsky > > Systest Engineer > > Juniper Networks Solutions Israel LTD. > > Office: 972-9-9712355 > > Office: 972-74-7170072 > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20090909/aae2aeb9/attachment.html>
