Hi Yes i accept, and have seen in HTTP conn. also.But i am sure their must be a way to suppress the access point list popping up during disconnection. As you can see in many application (like fring), when ever disconnection occurs it will try to connect with the access point from the user defined auto roaming table. Even i too maintain same scenario and have auto roaming table which has set of define access point by user. So when ever disconnection occurs i am monitoring the connection status and trying to connect with one of the access point from my auto roaming table. As per my taught my access point list is shown when ever disconnection occurs along with device access point list. So i planned in different way, when ever i get disconnection status i tried to destroy PjSIP and re-initialize. But when destroying PjSIP sends an un-register message to server which needs active connection to be exist else again a pop up to select access point will be shown. Any suggestions / comments pls ? Mukesh Srivastav wrote: > Hi, > you try implmenting a simple http connection exmaple in "Symbian", > you will see the same message, it is not the PJSIP IS smart enough, it > is symbian. > > > Have a look @ my small web-page: > http://www.geocities.com/muki_champs > > Regards, > Mukesh Kumar, > Sr.Software Engineer, > Mobile Application Developer. > Hyderabad. > India. > > <http://www.geocities.com/muki_champs> > > > ------------------------------------------------------------------------ > *From:* Srivatsan Deenadayalan <srivatsan at ongobiz.com> > *To:* pjsip list <pjsip at lists.pjsip.org> > *Sent:* Monday, February 9, 2009 6:21:58 PM > *Subject:* Re: [pjsip] Access Point problem in PjSIP Symbian S60 3ed > > Hi Pai, > > I think some mistakes / misunderstood occur with my question. Let me > explain again. > > Initially when invoking PjSIP, device will pop up for selection of > access point, which is because of aConn.Start(). If we have given > connection preference then we ll not get any popup's. > > if ((err = aSocketServer.Connect()) != KErrNone) > return PJ_STATUS_FROM_OS(err); > > // Open up a connection > if ((err = aConn.Open(aSocketServer)) != KErrNone) > { > aSocketServer.Close(); > return PJ_STATUS_FROM_OS(err); > } > > if ((err = aConn.Start()) != KErrNone) > { > aSocketServer.Close(); > return PJ_STATUS_FROM_OS(err); > } > > I am clear with it and my problem is not with this. > > At the app. launch i chooses a WLan access point from the list shown > by device, now if i move out of range from the WLan (say 500 meters), > then WLan connection will be disconnected.Immediately a access point > list is shown by PjSIP to make connection. > > My question here is... How PjSIP know / Monitors that a connection has > been disconnected ? Is their any call back methods from sockets > implemented to get the status ? Can any one pls give me the methods / > area where this occurs ? Then how it re-initialize after connecting to > a new access point ? > > I think this time my question might be clear. > > > Pai Peng wrote: > > hello, > > > > > > it depends on Symbian C++. based for Symbian 3rd. > > > > Check forum nokia for auto connection with socket, there is already > example/code for your purpose. > > > > > > Regards > > > > Pai > > > > On Sat, Feb 7, 2009 at 10:27 AM, Srivatsan Deenadayalan > <srivatsan at ongobiz.com <mailto:srivatsan at ongobiz.com> > <mailto:srivatsan at ongobiz.com <mailto:srivatsan at ongobiz.com>>> wrote: > > > > Hi All, > > > > I have implemented PjSIP successfully in my application, and works > > great. Thanks for PjSIP team :-) . I have a small problem in > > connecting with access points (WLan / GPRS / 3G). > > When i move out of range from a WLan access point which is used > > by PjSIP, a pop up showing access point list is shown by the > > device. But i don't want this access point to be shown, instead i > > have my own methods to show and select the access points. > > > > I have tried to destroy PjSIP when ever any interruptions occurs > > with connections and show my list of access points then > > reinitialize PjSIP. Before calling my methods , device access > > point pop up list comes in to picture. > > > > So my question is how to suppress the access point pop up which > > comes when ever any connection interruption occurs ? Is their any > > way to shut down and re-initialize PjSIP during disconnection of > > internet connection? > > > > Please some one help me ..... :-( > > > > -- Thanks And Regards, > > Srivatsan.D, > > > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org <http://blog.pjsip.org/> > > > > pjsip mailing list > > pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org> > <mailto:pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org>> > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org <http://blog.pjsip.org/> > > > > pjsip mailing list > > pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org> > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > -- Thanks And Regards, > Srivatsan.D, > > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org <http://blog.pjsip.org/> > > pjsip mailing list > pjsip at lists.pjsip.org <mailto:pjsip at lists.pjsip.org> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > ------------------------------------------------------------------------ > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > -- Thanks And Regards, Srivatsan.D,
