Hi, I am using PJSIP stack in a softphone application and want to check internet connection before initializing the stack. For this internet connection check, I am planning to send an HTTP GET to a web server and see if it replies with a 200 OK response. Can I develop such a utility using just PJLIB and PJLIB-UTIL features? If yes, can anyone please provide some pointers on the approach I should take for building this? Is there any similar utility or example code based on PJLIB I can use? Regards Girish **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS*** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20080909/272a2157/attachment-0001.html
