Hi Muge, Unfortunately i didn't build vlc myself. The lib and dll was given to me. But have a look at those two links: http://www.slackware.com/~alien/slackbuilds/vlc/build/ http://www.slackware.com/~alien/slackbuilds/vlc/build/vlc.SlackBuild The author did this impressive script that automatically builds VLC with most of the codecs you need. And i think he's got the latest VLC as well, version h or i. You run the script and after a few minutes it's done. You can tweak the script to do what you need it to do. That might help you. If you're strongly considering VLC you definitely should download the packages from the first link above and run the script vlc.Slackbuild. Best Regards, Hubert On Sat, Oct 18, 2008 at 4:22 AM, P.Muge Ersoy <muge.ersoy at gmail.com> wrote: > Hi Hubert; > > Did you compile vlc with h264 support by yourself ? > > It will be really helpfull if you check which vlc you installed for the > libvlc.dll for me ? :) > > Regards > Muge > > On Fri, Oct 17, 2008 at 2:55 AM, Hubert Langevin <hubertlangevin at gmail.com> > wrote: >> >> Hi Muge, >> >> So you can't stream H264. Hmmm not sure what's going on there. I think >> i had a similar problem and it had to do with what type of transport i >> was using and type of mux i was putting in the commands buffer. And >> also the video bit rate (vb=???). As i mentioned before i could stream >> to a softphone (Eyebeam) that was using H264 from pjsua/vlc. However i >> had to change my webcam and still my image on the remote softphone was >> pixelated. I was using a cheap (i mean really really cheap) webcam >> before and i had a problem transcoding the frames to H264. When i >> changed webcam to a more decent one things were slightly better. So it >> could be your webcam. However i have a strong feeling it's more to do >> with the version you're using, that is 8.6c. >> >> Also some videophones and soft IP PBXs have different payload types >> for video. You could check using Ethereal what payload type the >> softphone is using and expecting in return. Could be a >> mis-compatibility in payload types here and that's why it's not >> showing up on the other end. I'm just guessing here. I had a LOT of >> trouble getting video calls to work with different softphones out >> there and things tend to get complicated with incompatible payload >> types. >> >> I guess a way of testing if there's a problem with the dll or camera >> you're using would be to get your pjsua to negotiate SDP's with a >> softphone, in other words, establish a normal video call. BUT don't >> send your video from your pjsua/vlc yet, disable the video part or >> comment it out in your code. We just want the video SDP session up. >> Grab the remote ip and port of the softphone from the remote_sdp that >> it just sent you. Print it to screen or write it down. Get a pure H264 >> video sample off google or anywhere. Open the latest and greatest VLC >> player and start streaming that pure H264 sample to the softphone >> using the options in the VLC player and the ip and port parameters >> from remote_sdp. See if the softphone can display that stream. The >> softphone should not care what application is sending the video stream >> to it. It's just expecting video media on that port it gave you. And >> you can check with Ethereal if the outgoing stream from the player is >> H264 and which transport it is using, and also the stream the >> softphone is sending you and what transport it's using. If the >> softphone can display that stream coming from your VLC player, even >> pixelated, it's possible that there's a problem with the dll you're >> using. I saw quotes from other people on forums saying they forgot to >> include some options like --enable-x264 etc... when building their >> vlc. >> >> By the way i just wanted to mention i remember i also tried a normal >> video call (to test compatibility in general between independent soft >> videophones) between an Eyebeam softphone and a WengoPhone softphone >> and i just could not get them to work together. I was using a >> relatively new version of WengoPhone and an old version of Eyebeam. >> Maybe it had to do with again the webcam i was using or software >> versions or something on my PC i'm not sure. I checked codecs, >> firewalls, devices used and everything else but i could only get >> WengoPhone <===> WengoPhone, Eyebeam <===> Eyebeam, and of course, >> pjsua/vlc <===> pjsua/vlc. The scenario of Eyebeam <===> WengoPhone >> just didn't work for me. I haven't tried scenario of WengoPhone <===> >> pjsua/vlc. >> >> To answer your questions yes i am using the libvlc.dll and the OLD >> API. I haven't moved to the new API. I think because i had the same >> problem as you, meaning i couldn't get it to work in Visual C. I'm >> sure the new API would have more enhancements but i'm not interested >> in that right now. I just wanted to get PJSIP to PJSIP videocalls >> working with the least amount of trouble. When i feel like playing >> with MingW again i will get started on the new VLC API. >> >> And regarding your sdp file at first glance it looks fine. Mine is >> very similar to yours. You can write all these parameters using >> virtually only local_sdp or remote_sdp. I can see you're using payload >> type 98. I know the RFC says something about payload type 100, 99 and >> 98. But what i had to make sure was along the path of the video call, >> all devices involved on the way, i mean the SIP registrar, your SIP >> user agent, and the remote softphone, actually agree on the payload >> types and that no one was silently complaining. >> >> Let me know how you go with your tests. >> >> Best Regards, >> >> Hubert >> >> On Fri, Oct 17, 2008 at 12:42 AM, P.Muge Ersoy <muge.ersoy at gmail.com> >> wrote: >> > Hi Hubert; >> > >> > I tried your method of grapping ports and ip address and it works fine. >> > >> > But when ever i start streaming i am not able to stream h264 .. it >> > captured >> > my outgoing packages and see that my stream is mpeg2 (Payload type: >> > MPEG-II >> > transport streams (33)) . So i am not able to see anything on the >> > softphone >> > .. But it is working fine between two pjsua client.. >> > >> > I am sure you checked your stream if it is h264 didnt you ? May be 8.6c >> > is >> > not supporting h264 i am not so sure .. >> > >> > Btw Visual C example of vlc is not working on new API at all.. I tried >> > VLC >> > 9. 4 and VLC 8.6c .. Only 8.6c was worked with libvlc.dll export.. >> > >> > Are you using dll too ? >> > >> > Also i d like to show my sdp file something like that .. >> > >> > v=0 >> > o=- 597327894206 2 IN IP4 192.168.0.165 >> > s=NONE >> > t=0 0 >> > c=IN IP4 192.168.0.165 >> > m=video 14444 RTP/AVP 98 >> > b=AS:28 >> > a=rtpmap:98 H264/90000 >> > >> > >> > >> > Muge >> > >> > >> > On Thu, Oct 16, 2008 at 1:12 AM, Hubert Langevin >> > <hubertlangevin at gmail.com> >> > wrote: >> >> >> >> Hi Muge, >> >> >> >> Yes i think you're right. When i run pjsua i do load ALL the plugins >> >> for VLC from the plugins directory. Maybe i should remove what i don't >> >> need from there. >> >> >> >> Regarding your question about getting SDP information i do it in the >> >> callback on_call_state(pjsua_call_id call_id, pjsip_event *e). When >> >> SDP negotiation is finished and everyone is happy in terms of sdp >> >> parameters, and when the callback's event is CONFIRMED, i acquire the >> >> call using the call_id as in acquire_call("Something Something", >> >> call_id, &call, &dlg). I then grab the local and remote SDP's using: >> >> >> >> pjmedia_sdp_neg_get_active_local(call->inv->neg, &local_sdp); >> >> pjmedia_sdp_neg_get_active_remote(call->inv->neg, &remote_sdp); >> >> >> >> Once i get the two SDP's above, all i do is check for the video >> >> parameters. I think it's in remote_sdp->conn->addr and >> >> remote_sdp->media[i]->desc.port and remote_sdp->media[i]->desc.fmt[0] >> >> and so on and so forth. Just grab the things you think you might need >> >> from the remote SDP (and local SDP) for whichever player you are >> >> using. I'm using VLC so IP address, port and codec are the main things >> >> for me. I also do a LOT of checks but that's the above concept is >> >> mainly how i do it. >> >> >> >> Then you can write the video.sdp file. which you already how it looks >> >> like. Then you can proceed on how you want to implement your video >> >> handling from here. If you are using VLC there are a few ways to do >> >> that, you just need to pick the one you feel more comfortable with. I >> >> personally use the --extraintf and --vlm-conf method but that's just >> >> me. >> >> >> >> Hubert >> >> >> >> On Thu, Oct 16, 2008 at 2:18 AM, P.Muge Ersoy <muge.ersoy at gmail.com> >> >> wrote: >> >> > Hi Hubert; >> >> > >> >> > I tried your way of vlc video call.. I guess the problem at your cpu >> >> > is >> >> > because of loading to many dll ( vlc and plugins) during the call.. >> >> > My computer was forced also.. >> >> > I am using VStudio so i am using libvlc.dll... actually i ve tried to >> >> > make >> >> > .def filen and convert libvlc.lib but lib didnt work.. I guess it was >> >> > because new api of vlc.. >> >> > >> >> > Did you code to get SDP information from pjsua_app.c or is there any >> >> > Pjsua >> >> > api to get active sdp information ? >> >> > >> >> > muge >> >> > >> >> > >> >> > >> >> > On Wed, Oct 15, 2008 at 2:07 AM, Hubert Langevin >> >> > <hubertlangevin at gmail.com> >> >> > wrote: >> >> >> >> >> >> Hi Muge, >> >> >> >> >> >> Yeah that's why i didn't follow that guide. It's got some good tips >> >> >> on >> >> >> which functions you use but the whole thing is a bit too confusing >> >> >> for >> >> >> me and just didn't work for me. I am using the old version of VLC, >> >> >> i'm >> >> >> not sure how to call it. It's at this link below. Again the old >> >> >> version is simple for what i want to accomplish. >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> http://www.videolan.org/developers/vlc/doc/doxygen/html/group__libvlc__old.html >> >> >> >> >> >> I was reading what you mentioned earlier, about the fact that you >> >> >> want >> >> >> video calls between pjsua to other software clients and soft phones/ >> >> >> VoIP Phones. Can't you do that already using VLC both ways? I mean >> >> >> for >> >> >> video calls all you need is modify your outgoing SDP so it contains >> >> >> video media at a certain port that you specify at startup so the >> >> >> remote video phones can read it and you read their corresponding SDP >> >> >> and start one instance of VLC that reads and decodes at the same >> >> >> time. >> >> >> I do that using VLC_AddIntf() for multiple video streams incoming >> >> >> and >> >> >> outgoing. The audio is still handled by pjsip during that same sdp >> >> >> exchange and the video by vlc. For any re-invites, for example >> >> >> change >> >> >> of remote video port or remote video codec, just destroy the vlc >> >> >> instance in on_call_media() callback and re-create it using the new >> >> >> values from the re-invites. I mean it is still a video call that i >> >> >> make to other video phones. I did a test from my pjsua to an eyebeam >> >> >> (x-lite) video phone and everything was fine. Audio was fine and >> >> >> video >> >> >> was showing as well. Actually video was very pixelated, even though >> >> >> I >> >> >> did specify H264 from Eyebeam and pjsua. Maybe eyebeam and videolan >> >> >> have different implementations of H264 i'm not sure. But video calls >> >> >> between pjsua <===> pjsua works perfectly. >> >> >> >> >> >> And VLC does support SRTP from what i've seen. I'm using pjsua too. >> >> >> Are you using libvlc.lib and libvlc.dll? >> >> >> >> >> >> Hubert >> >> >> >> >> >> On Wed, Oct 15, 2008 at 9:36 AM, P.Muge Ersoy <muge.ersoy at gmail.com> >> >> >> wrote: >> >> >> > yeah i am not getting anything also.. >> >> >> > may i ask which version of vlc you are using? >> >> >> > >> >> >> > I tried it but there are some errors like below >> >> >> > main interface error: no interface module matched "hotkeys,none" >> >> >> > >> >> >> > On Wed, Oct 15, 2008 at 1:04 AM, Hubert Langevin >> >> >> > <hubertlangevin at gmail.com> >> >> >> > wrote: >> >> >> >> >> >> >> >> Hi Muge, >> >> >> >> >> >> >> >> Oh that tutorial. Yeah i started off that tutorial. My >> >> >> >> implementation >> >> >> >> of video is very very similar. I use the commands buffer, >> >> >> >> VLC_Create(), VLC_Init(), VLC_ADDINTF(), etc. But i found the >> >> >> >> guide >> >> >> >> a >> >> >> >> bit too complicated/confusing and overloaded for what i wanted to >> >> >> >> do. >> >> >> >> Especially his definitions in the vlc.h file. Don't need all >> >> >> >> that. >> >> >> >> What i do is just get the remote IP, port, codec from remote_sdp >> >> >> >> and >> >> >> >> use a couple of VLC functions to stream and decode. Done. That >> >> >> >> tutorial i found was too much for what i simply wanted to do. >> >> >> >> Plus, >> >> >> >> i >> >> >> >> was never good at spanish. ;) >> >> >> >> >> >> >> >> Hubert >> >> >> >> >> >> >> >> >> >> >> >> On Wed, Oct 15, 2008 at 5:27 AM, P.Muge Ersoy >> >> >> >> <muge.ersoy at gmail.com> >> >> >> >> wrote: >> >> >> >> > Hi Hubert; >> >> >> >> > >> >> >> >> > I have a question for you .. >> >> >> >> > >> >> >> >> > Did you use the below tutorial for vlc display inside pjsip? >> >> >> >> > http://wiki.videolan.org/LibVLC_Visual_C >> >> >> >> > >> >> >> >> > >> >> >> >> > Muge >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> > On Tue, Oct 14, 2008 at 12:51 AM, Hubert Langevin >> >> >> >> > <hubertlangevin at gmail.com> >> >> >> >> > wrote: >> >> >> >> >> >> >> >> >> >> Hello Muge, >> >> >> >> >> >> >> >> >> >> Yes my implementation sounds different. I guess i took the >> >> >> >> >> easiest >> >> >> >> >> and >> >> >> >> >> quickest way to get video working. I do write the file.sdp >> >> >> >> >> file >> >> >> >> >> just >> >> >> >> >> like you and get VLC to read and decode the sdp file, but i >> >> >> >> >> also >> >> >> >> >> use >> >> >> >> >> VLC to stream. >> >> >> >> >> >> >> >> >> >> To answer your question yes i did install Microsoft Platform >> >> >> >> >> SDK... >> >> >> >> >> Hmmm... i can't remember which version though. >> >> >> >> >> >> >> >> >> >> Quick question. Since you are already using VLC to decode, why >> >> >> >> >> not >> >> >> >> >> use >> >> >> >> >> it to stream as well? You won't have to take care of streams, >> >> >> >> >> ports, >> >> >> >> >> transports, etc... It might be easier for you. I mean you are >> >> >> >> >> already >> >> >> >> >> using VLC to decode, might as well use it to encode. Makes >> >> >> >> >> your >> >> >> >> >> life >> >> >> >> >> easier. Maybe i'm missing something that you want to >> >> >> >> >> accomplish. >> >> >> >> >> >> >> >> >> >> What do you think? >> >> >> >> >> >> >> >> >> >> Hubert >> >> >> >> >> >> >> >> >> >> On Tue, Oct 14, 2008 at 12:06 AM, P.Muge Ersoy >> >> >> >> >> <muge.ersoy at gmail.com> >> >> >> >> >> wrote: >> >> >> >> >> > Hi Hubert; >> >> >> >> >> > >> >> >> >> >> > Actually my implementation is quite different from yours. I >> >> >> >> >> > want >> >> >> >> >> > pjsip >> >> >> >> >> > to >> >> >> >> >> > stream h264 from one side to other.. You choose VLC to do >> >> >> >> >> > it.. >> >> >> >> >> > I changed pjmedia_session_create and pjmedia_stream_create >> >> >> >> >> > functions >> >> >> >> >> > as >> >> >> >> >> > well >> >> >> >> >> > as SDP negotiation. >> >> >> >> >> > >> >> >> >> >> > I want vlc to decode this h264 stream with file.sdp which >> >> >> >> >> > includes >> >> >> >> >> > remote ip >> >> >> >> >> > and port information with codec. >> >> >> >> >> > >> >> >> >> >> > Did you install Microsoft Platform SDK for direct show >> >> >> >> >> > headers >> >> >> >> >> > ? >> >> >> >> >> > >> >> >> >> >> > Muge >> >> >> >> >> > >> >> >> >> >> > On Sat, Oct 11, 2008 at 8:53 AM, Hubert Langevin >> >> >> >> >> > <hubertlangevin at gmail.com> >> >> >> >> >> > wrote: >> >> >> >> >> >> >> >> >> >> >> >> Hi Mugo, >> >> >> >> >> >> >> >> >> >> >> >> No i don't create another stream for video. I just make >> >> >> >> >> >> sure >> >> >> >> >> >> the >> >> >> >> >> >> port >> >> >> >> >> >> ranges for audio and video don't overlap. For example for >> >> >> >> >> >> audio i >> >> >> >> >> >> do >> >> >> >> >> >> the usual pjsip thing, start the port range at 4000 and >> >> >> >> >> >> with a >> >> >> >> >> >> maximum >> >> >> >> >> >> of 32 calls it'll go up to 4063. For the video i've got a >> >> >> >> >> >> config >> >> >> >> >> >> file >> >> >> >> >> >> that pjsua_app.c reads at startup. In there i specify what >> >> >> >> >> >> port >> >> >> >> >> >> video >> >> >> >> >> >> should start at. And i usually put it at 6000. When the >> >> >> >> >> >> application >> >> >> >> >> >> runs it checks if those ports are free or not and starts >> >> >> >> >> >> using >> >> >> >> >> >> them. >> >> >> >> >> >> This way my audio and video ports don't overlap. >> >> >> >> >> >> >> >> >> >> >> >> When i create my SDP, and before i send the offer, the >> >> >> >> >> >> initial >> >> >> >> >> >> port >> >> >> >> >> >> for video is the one that i specified in the video config >> >> >> >> >> >> file. >> >> >> >> >> >> After >> >> >> >> >> >> having sent the offer and read the incoming remote_sdp, >> >> >> >> >> >> what i >> >> >> >> >> >> pass >> >> >> >> >> >> to >> >> >> >> >> >> VLC is just the port number to transmit to, IP address to >> >> >> >> >> >> transmit >> >> >> >> >> >> to, >> >> >> >> >> >> transcoding codec, video bit rate and the mux type. I pass >> >> >> >> >> >> it >> >> >> >> >> >> to >> >> >> >> >> >> the >> >> >> >> >> >> commands buffer of VLC and use the functions VLC_Create(), >> >> >> >> >> >> VLC_Init(int, int, char **s), >> >> >> >> >> >> VLC_Play(int),VLC_FullScreen(int), >> >> >> >> >> >> etc... So to answer your question no i don't let PJSIP >> >> >> >> >> >> handle >> >> >> >> >> >> the >> >> >> >> >> >> video streams. I use PJSIP only for SDP negotiation that's >> >> >> >> >> >> it. >> >> >> >> >> >> I >> >> >> >> >> >> leave >> >> >> >> >> >> PJSIP to take care of all the audio streams and ports. And >> >> >> >> >> >> i >> >> >> >> >> >> keep >> >> >> >> >> >> the >> >> >> >> >> >> video part to VLC, including its transport and everything >> >> >> >> >> >> else. >> >> >> >> >> >> PJSIP >> >> >> >> >> >> doesn't touch that part. >> >> >> >> >> >> >> >> >> >> >> >> I can see you're using H264. I am too. Did you ever have >> >> >> >> >> >> two >> >> >> >> >> >> incoming >> >> >> >> >> >> H264 streams on your PC? How was your CPU usage?. When i >> >> >> >> >> >> have >> >> >> >> >> >> more >> >> >> >> >> >> than one on my PC my CPU usage doesn't look too good.. >> >> >> >> >> >> >> >> >> >> >> >> Hubert >> >> >> >> >> >> >> >> >> >> >> >> On Fri, Oct 10, 2008 at 7:26 PM, P.Muge Ersoy >> >> >> >> >> >> <muge.ersoy at gmail.com> >> >> >> >> >> >> wrote: >> >> >> >> >> >> > Hi Hubert; >> >> >> >> >> >> > >> >> >> >> >> >> > Haven't you created another stream for video ? >> >> >> >> >> >> > >> >> >> >> >> >> > As far as i understand after SDP negotiation you get if >> >> >> >> >> >> > there >> >> >> >> >> >> > is >> >> >> >> >> >> > video >> >> >> >> >> >> > stream or not... >> >> >> >> >> >> > >> >> >> >> >> >> > This is my OK answer form pjsip to another sip client >> >> >> >> >> >> > >> >> >> >> >> >> > m=audio 4000 RTP/AVP 3 >> >> >> >> >> >> > a=rtpmap:3 GSM/8000 >> >> >> >> >> >> > m=video 4002 RTP/AVP 98 >> >> >> >> >> >> > a=rtpmap:98 H264/90000 >> >> >> >> >> >> > a=recvonly >> >> >> >> >> >> > >> >> >> >> >> >> > Everything seems pretty. But after streams are created >> >> >> >> >> >> > Pjsip >> >> >> >> >> >> > mixes >> >> >> >> >> >> > the >> >> >> >> >> >> > ports >> >> >> >> >> >> > with audio and video and it all crashes ... >> >> >> >> >> >> > How is your point of view to audio and video streams in >> >> >> >> >> >> > your >> >> >> >> >> >> > application. >> >> >> >> >> >> > >> >> >> >> >> >> > Regards >> >> >> >> >> >> > Muge >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > On Fri, Oct 10, 2008 at 1:02 AM, Hubert Langevin >> >> >> >> >> >> > <hubertlangevin at gmail.com> >> >> >> >> >> >> > wrote: >> >> >> >> >> >> >> >> >> >> >> >> >> >> Hello everyone, >> >> >> >> >> >> >> >> >> >> >> >> >> >> I'm using VLC for video streaming in pjsip. I haven't >> >> >> >> >> >> >> completely >> >> >> >> >> >> >> finished it yet but i can now make some video calls >> >> >> >> >> >> >> between >> >> >> >> >> >> >> PCs. >> >> >> >> >> >> >> In >> >> >> >> >> >> >> the callback on_call_state() in pjsua_app.c when i get >> >> >> >> >> >> >> an >> >> >> >> >> >> >> incoming >> >> >> >> >> >> >> call i check if it has video media. I do this by >> >> >> >> >> >> >> grabbing >> >> >> >> >> >> >> the >> >> >> >> >> >> >> local_sdp and remote_sdp using call_id, acquire_call, >> >> >> >> >> >> >> pjmedia_sdp_neg_get_active_local(), >> >> >> >> >> >> >> pjmedia_sdp_neg_get_active_remote(), etc. I also had to >> >> >> >> >> >> >> change >> >> >> >> >> >> >> a >> >> >> >> >> >> >> few >> >> >> >> >> >> >> things in negotiating SDP's. If i have video media i >> >> >> >> >> >> >> just >> >> >> >> >> >> >> grab >> >> >> >> >> >> >> the >> >> >> >> >> >> >> remote IP and port number out of the remote_sdp, put >> >> >> >> >> >> >> these >> >> >> >> >> >> >> values >> >> >> >> >> >> >> in >> >> >> >> >> >> >> the commands buffer for VLC and start playing from >> >> >> >> >> >> >> remote >> >> >> >> >> >> >> stream >> >> >> >> >> >> >> and >> >> >> >> >> >> >> streaming off my webcam using the VLC functions: >> >> >> >> >> >> >> VLC_Create(), >> >> >> >> >> >> >> VLC_Init(int, int, char **s), VLC_Play(int), >> >> >> >> >> >> >> VLC_AddIntf(int, >> >> >> >> >> >> >> char >> >> >> >> >> >> >> *s, >> >> >> >> >> >> >> int, int), VLC_Die(), VLC_CleanUp(), VLC_Destroy(), >> >> >> >> >> >> >> VLC_Pause(int), >> >> >> >> >> >> >> VLC_Stop(int), VLC_FullScreen(int). It works fine but as >> >> >> >> >> >> >> soon >> >> >> >> >> >> >> as >> >> >> >> >> >> >> I >> >> >> >> >> >> >> get >> >> >> >> >> >> >> two video calls up on my PC my CPU usage jumps really >> >> >> >> >> >> >> high >> >> >> >> >> >> >> and >> >> >> >> >> >> >> stays >> >> >> >> >> >> >> there for the duration of the two calls. Is it because >> >> >> >> >> >> >> I'm >> >> >> >> >> >> >> using >> >> >> >> >> >> >> the >> >> >> >> >> >> >> wrong type of video codec? I'm currently using H264. >> >> >> >> >> >> >> >> >> >> >> >> >> >> Any ideas would be greatly appreciated. >> >> >> >> >> >> >> >> >> >> >> >> >> >> Hubert >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Fri, Oct 10, 2008 at 4:39 AM, Tiago R?s >> >> >> >> >> >> >> <tiagores at gmail.com> >> >> >> >> >> >> >> wrote: >> >> >> >> >> >> >> > Hello all, >> >> >> >> >> >> >> > Thanks for your responses. >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > My Idea is to make some kind of videoconference. It >> >> >> >> >> >> >> > should >> >> >> >> >> >> >> > be >> >> >> >> >> >> >> > signaled >> >> >> >> >> >> >> > with >> >> >> >> >> >> >> > SIP, and stream via RTP. >> >> >> >> >> >> >> > I'm able to capture video using directshow libraries, >> >> >> >> >> >> >> > and >> >> >> >> >> >> >> > it >> >> >> >> >> >> >> > would >> >> >> >> >> >> >> > be >> >> >> >> >> >> >> > great >> >> >> >> >> >> >> > to use transport functions of PJSIP to do the rest. >> >> >> >> >> >> >> > What do you think? >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > Thanks, >> >> >> >> >> >> >> > Tiago >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > 2008/10/9 P.Muge Ersoy <muge.ersoy at gmail.com> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> Hi; >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> Did you able to start two way stream with 264 . I >> >> >> >> >> >> >> >> have >> >> >> >> >> >> >> >> some >> >> >> >> >> >> >> >> port >> >> >> >> >> >> >> >> issues >> >> >> >> >> >> >> >> .. >> >> >> >> >> >> >> >> video stream is using audio streams port.. i will be >> >> >> >> >> >> >> >> handling >> >> >> >> >> >> >> >> it >> >> >> >> >> >> >> >> soon i >> >> >> >> >> >> >> >> guess.. >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> and what are you using for displaying stream , ? VLC >> >> >> >> >> >> >> >> or >> >> >> >> >> >> >> >> ffmpeg >> >> >> >> >> >> >> >> .? >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> muge >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Thu, Oct 9, 2008 at 4:27 PM, Perry Ismangil >> >> >> >> >> >> >> >> <perry at pjsip.org> >> >> >> >> >> >> >> >> wrote: >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> emanuele bottegoni wrote: >> >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> Hi Tiago, >> >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> I've added negotation to receive H264 streams,is it >> >> >> >> >> >> >> >>>> interesting >> >> >> >> >> >> >> >>>> for >> >> >> >> >> >> >> >>>> you? >> >> >> >> >> >> >> >>>> Tell me your problem and if it's possible I can >> >> >> >> >> >> >> >>>> help >> >> >> >> >> >> >> >>>> you. >> >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> Emanuele Bottegoni >> >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> Hi Emanuele, >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> Certainly, adding video support is always >> >> >> >> >> >> >> >>> interesting. >> >> >> >> >> >> >> >>> Contact >> >> >> >> >> >> >> >>> me >> >> >> >> >> >> >> >>> if >> >> >> >> >> >> >> >>> you >> >> >> >> >> >> >> >>> are willing to write a wiki page or a blog post >> >> >> >> >> >> >> >>> about >> >> >> >> >> >> >> >>> it. >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> Thank you for your support, >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> -- >> >> >> >> >> >> >> >>> Perry Ismangil >> >> >> >> >> >> >> >>> http://www.pjsip.org >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> _______________________________________________ >> >> >> >> >> >> >> >>> Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> pjsip mailing list >> >> >> >> >> >> >> >>> pjsip at lists.pjsip.org >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> >> >> >> >> Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> pjsip mailing list >> >> >> >> >> >> >> >> pjsip at lists.pjsip.org >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > _______________________________________________ >> >> >> >> >> >> >> > Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > pjsip mailing list >> >> >> >> >> >> >> > pjsip at lists.pjsip.org >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> >> >> >> Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> >> >> >> >> >> >> >> >> pjsip mailing list >> >> >> >> >> >> >> pjsip at lists.pjsip.org >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > _______________________________________________ >> >> >> >> >> >> > Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> > >> >> >> >> >> >> > pjsip mailing list >> >> >> >> >> >> > pjsip at lists.pjsip.org >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> >> >> Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> >> >> >> >> >> >> pjsip mailing list >> >> >> >> >> >> pjsip at lists.pjsip.org >> >> >> >> >> >> >> >> >> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > _______________________________________________ >> >> >> >> >> > Visit our blog: http://blog.pjsip.org >> >> >> >> >> > >> >> >> >> >> > pjsip mailing list >> >> >> >> >> > pjsip at lists.pjsip.org >> >> >> >> >> > >> >> >> >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> >> Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> >> >> >> >> pjsip mailing list >> >> >> >> >> pjsip at lists.pjsip.org >> >> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> > >> >> >> >> > >> >> >> >> > _______________________________________________ >> >> >> >> > Visit our blog: http://blog.pjsip.org >> >> >> >> > >> >> >> >> > pjsip mailing list >> >> >> >> > pjsip at lists.pjsip.org >> >> >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> >> > >> >> >> >> > >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> >> >> pjsip mailing list >> >> >> >> pjsip at lists.pjsip.org >> >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> > >> >> >> > >> >> >> > _______________________________________________ >> >> >> > Visit our blog: http://blog.pjsip.org >> >> >> > >> >> >> > pjsip mailing list >> >> >> > pjsip at lists.pjsip.org >> >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> >> > >> >> >> > >> >> >> >> >> >> _______________________________________________ >> >> >> Visit our blog: http://blog.pjsip.org >> >> >> >> >> >> pjsip mailing list >> >> >> pjsip at lists.pjsip.org >> >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> > >> >> > >> >> > _______________________________________________ >> >> > Visit our blog: http://blog.pjsip.org >> >> > >> >> > pjsip mailing list >> >> > pjsip at lists.pjsip.org >> >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> > >> >> > >> >> >> >> _______________________________________________ >> >> Visit our blog: http://blog.pjsip.org >> >> >> >> pjsip mailing list >> >> pjsip at lists.pjsip.org >> >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> > >> > >> > _______________________________________________ >> > Visit our blog: http://blog.pjsip.org >> > >> > pjsip mailing list >> > pjsip at lists.pjsip.org >> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> > >> > >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >
