Thanks for the info, Jorge. I'll add this to the IMS wiki shortly.
For the PJSIP_HAS_DIGEST_AKA_AUTH configuration, rather than changing
sip_config.h, the official way to do this is to override the setting
in your config_site.h, so that you'll not get conflicts next time you
do "svn update". So add this to your config_site.h instead:
#define PJSIP_HAS_DIGEST_AKA_AUTH 1
And for the DNS, what if you put the DNS server in --nameserver option in pjsua?
cheers,
-benny
On 2/8/08, jorge.amador at withus.pt <jorge.amador at withus.pt> wrote:
> Hi Benny,
>
> In fact I didn't need to change much. After getting the latest svn
> version I only changed the file sip_config.h where I changed the
> definition of PJSIP_HAS_DIGEST_AKA_AUTH from 0 to 1. Then I use the
> following configuration:
>
> acc_cfg[0].id =
> pj_str("sip:yoursipurl at sipserver");
>
> acc_cfg[0].reg_uri = pj_str("sip:sipserver");
>
> acc_cfg[0].proxy[0] = pj_str("sip:sipproxy;lr");
>
> acc_cfg[0].proxy_cnt = 1;
>
> acc_cfg[0].cred_count = 1;
>
> acc_cfg[0].cred_info[0].realm = pj_str("*");
>
> acc_cfg[0].cred_info[0].scheme = pj_str("digest");
>
> acc_cfg[0].cred_info[0].username = pj_str("yourusername");
>
> acc_cfg[0].cred_info[0].data = pj_str("yourpassword");
>
> acc_cfg[0].cred_info[0].data_type =
> PJSIP_CRED_DATA_PLAIN_PASSWD | PJSIP_CRED_DATA_EXT_AKA;
>
> app_config.acc_cfg[0].cred_info[0].ext.aka.k = pj_str("yourpassword");
>
> app_config.acc_cfg[0].cred_info[0].ext.aka.cb =
> &pjsip_auth_create_aka_response;
>
>
> This was enough to solve my problem. Hope it helps. Relating the issue
> I told you about in the last e-mail I forgot to mention that the my
> dns is correctly configured in /etc/resolv_conf. Still if I configure
> the proxy's address with the IP address it works fine but if I use its
> url it doesn't register. Any idea what could be wrong? Best regards,
>
> Jorge Amador
>
>
> Quoting Benny Prijono <bennylp at pjsip.org>:
>
> > Hi Jorge,
> >
> > that's good news! Would you mind sharing your configuration to us? I
> > wanted to write a small doc on configuring PJSIP to work with IMS, but
> > unfortunately I forgot most of the settings. :D
> >
> > cheers.
> > -benny
> >
> > On 2/7/08, jorge.amador at withus.pt <jorge.amador at withus.pt> wrote:
> >> Hi everyone,
> >>
> >> Thank you all for your hints. I'm now able to register to the P-CSCF.
> >> I had to get the latest svn version and use aka authentication as well
> >> as loose routing. Still I have a curious situation going on. If I
> >> configure the proxy's address with the IP address it works fine but if
> >> I use its url it doesn't register. In both cases I configure the
> >> server's address with its url. Any clue what might be wrong? Best
> >> regards,
> >>
> >> Jorge Amador
> >
> > _______________________________________________
> > Visit our blog: http://blog.pjsip.org
> >
> > pjsip mailing list
> > pjsip at lists.pjsip.org
> > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
> >
>
>
>
