RE: Recharging digital camera batteries

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Well some of the trips I am planning, you figure a battery and a back up a day for 15 days with no power and its an issue.  Now how many batteries would you actually use is anyones guess including the person planning.  For a night or two it isn't that much of a problem.  Turning the display off is a great saver. I believe we tend to be too dependent on that screen as it is.  Yet with extra batteries as they age they also tend to lose their charge the longer they sit between charge and use.  Batteries that start a trip with a full charge may not have one when you get ready to use it. .   I could use film, and may have to but that is totally different horse to ride.

The trick will be to find a practical combination of battery power that would work with existing cradle and electronics.  Find a way to cheaply and easily match the power of that  of an auto lighter, then the rest is already available.  Some would work but aren't cheap.  Some are cheap, but would be impractical.  To design all the circuits of the charging cradle would definitely be beyond me.  Yet sometimes you don't need to reinvent the wheel, but you might need a different axle grease to make it work better.

ce.net.au>
Date: Thu, April 16, 2009 8:42 pm
To: List for Photo/Imaging Educators - Professionals - Students
<photoforum@xxxxxxxxxxxxxxxxxx>


I think you need to think laterally.  I am sure some form of current/voltage controlled circuit would be needed to charge from a car battery or any other standard cells.  Otherwise you could ruin your camera battery. 
 
I understand your concerns on a long trip, spare camera batteries are nice, but usually expensive.  I always carry one spare, recharge battery in camera and make it the spare.  Then both batteries kept at full charge.
 
I had problems on a recent trip.  First night out went to do the daily recharge of the battery, found I had packed the charger for the old camera.  So investigated, and found I could improve battery life by turning off the rear screen menu display.  Only turned it on if adjustments needed.  Happily at a photographic convention found someone with the same camera, he did a recharge for me, but I still went to the final week of travel with 2 charged batteries, and no charger.  Happily I easily lasted. 
 
So IMPORTANTLY, check which camera functions drain the battery and are not necessary all the time.  Such as screen displays operating continuously, or anti-shake.  Turn off when not needed.
 
To find oout more on batteries and how to look after them, there was a website given on this list some time ago, the Battery University, http://www.batteryuniversity.com/index.htm
 
Worth a look at, and perhaps the original question could be asked of them.
 
Enjoy your trip.
 
Jim Thyer
Well there are some good ideas.  I always carry 3 batteries, but one never knows just how fast one is going to go through them and when one is going to decide to up and quit.  Staying out for as much as a week needing 3 batteries per day would be tough. 

I don't know if the simple light weight 9 volt battery, the type that used to be used in radios before Ipods would work.  Light, may not last that long, but a 9 volt is a couple of bucks.  Best Buy had the batteries for about $40 bucks or so.  Yes I can get them cheaper, but I am not going to get them $2 cheap and if that $2 will charge a $40 buck battery all the better.

The back packs with the solar cells look interesting and could be a solution for a laptop battery, but its also a lot more than I wanted to spend at this point.  I bought two 4 gig CF flash cards at Costco last week for about 35 bucks.  Extra cards for me would make more sense than trying to deal with an image dump till I can get to power for the laptop.

I did see what looked like a grip for the body on KEH that took AA batteries.  The AA might solve the problem if a set of batteries would last as long as a battery pack.  Again that was also a couple of  hundred bucks, but I would at least get the verticle shutter release back.

 

[Index of Archives] [Share Photos] [Epson Inkjet] [Scanner List] [Gimp Users] [Gimp for Windows]

  Powered by Linux