On 3.4.2012 17:42, Cesar Martin wrote: > Yes, setting is the same in both machines. > > The results of bonnie++ running without arguments are: > > Version 1.96 ------Sequential Output------ --Sequential Input- > --Random- > -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- > --Seeks-- > Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP > /sec %CP > cltbbdd01 126G 94 99 202873 99 208327 95 1639 91 819392 88 > 2131 139 > Latency 88144us 228ms 338ms 171ms 147ms > 20325us > ------Sequential Create------ --------Random > Create-------- > -Create-- --Read--- -Delete-- -Create-- --Read--- > -Delete-- > files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP > /sec %CP > cltbbdd01 16 8063 26 +++++ +++ 27361 96 31437 96 +++++ +++ > +++++ +++ > Latency 7850us 2290us 2310us 530us 11us > 522us > > With DD, one core of CPU put at 100% and results are about 100-170 > MBps, that I thing is bad result for this HW: > > dd if=/dev/zero of=/vol02/bonnie/DD bs=8M count=100 > 100+0 records in > 100+0 records out > 838860800 bytes (839 MB) copied, 8,1822 s, 103 MB/s > > dd if=/dev/zero of=/vol02/bonnie/DD bs=8M count=1000 conv=fdatasync > 1000+0 records in > 1000+0 records out > 8388608000 bytes (8,4 GB) copied, 50,8388 s, 165 MB/s > > dd if=/dev/zero of=/vol02/bonnie/DD bs=1M count=1024 conv=fdatasync > 1024+0 records in > 1024+0 records out > 1073741824 bytes (1,1 GB) copied, 7,39628 s, 145 MB/s > > When monitor I/O activity with iostat, during dd, I have noticed that, > if the test takes 10 second, the disk have activity only during last 3 > or 4 seconds and iostat report about 250-350MBps. Is it normal? Well, you're testing writing, and the default behavior is to write the data into page cache. And you do have 64GB of RAM so the write cache may take large portion of the RAM - even gigabytes. To really test the I/O you need to (a) write about 2x the amount of RAM or (b) tune the dirty_ratio/dirty_background_ratio accordingly. BTW what are you trying to achieve with "conv=fdatasync" at the end. My dd man page does not mention 'fdatasync' and IMHO it's a mistake on your side. If you want to sync the data at the end, then you need to do something like time sh -c "dd ... && sync" > I set read ahead to different values, but the results don't differ > substantially... Because read-ahead is for reading (which is what a SELECT does most of the time), but the dests above are writing to the device. And writing is not influenced by read-ahead. To test reading, do this: dd if=/vol02/bonnie/DD of=/dev/null bs=8M count=1024 Tomas -- Sent via pgsql-performance mailing list (pgsql-performance@xxxxxxxxxxxxxx) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-performance
