On Jan 18, 2008 2:14 PM, Greg Smith <gsmith@xxxxxxxxxxxxx> wrote:
Greg, this is GREAT information and I'm glad you stepped through the process. It is really interesting to see to what extent these slots that have similar names (or the same names) should be expected to behave so differently. We'll try some of the things you suggest (although it will probably take a while to do) and if we come to any conclusions will let everyone know our conclusions.
Sean
On Fri, 18 Jan 2008, Sean Davis wrote:Now we're getting somewhere. I'll dump this on-list as it's a good
> FYI, here are the specs on the server.
> http://www.thinkmate.com/System/8U_Dual_Xeon_i2SS40-8U_Storage_Server
example of how to fight this class of performance problems.
The usual troubleshooting procedure is to figure out how the motherboard
is mapping all the I/O internally and then try to move things out of the
same path. That tells us that you have an Intel S5000PSL motherboard, and
the tech specs are at
http://support.intel.com/support/motherboards/server/s5000psl/sb/CS-022619.htm
What you want to stare at is the block diagram that's Figure 10, page 27
(usually this isn't in the motherboard documentation, and instead you have
to drill down into the chipset documentation to find it). Slots 5 and 6
that have PCI Express x16 connectors (but run at x8 speed) both go
straight into the memory hub. Slots 3 and 4, which are x8 but run at x4
speed, go through the I/O controller first. Those should be slower, so if
you put a card into there it will have a degraded top-end performance
compared to slots 5/6.
Line that up with the layout in Figure 2, page 17, and you should be able
to get an idea what the possibilities are for moving the cards around and
what the trade-offs involved are. Ideally you'd want both 3Ware cards to
be in slots 5+6, but if that's your current configuration you could try
moving the less important of the two (maybe the one with less drives) to
either slot 3/4 and see if the contention you're seeing drops.
Greg, this is GREAT information and I'm glad you stepped through the process. It is really interesting to see to what extent these slots that have similar names (or the same names) should be expected to behave so differently. We'll try some of the things you suggest (although it will probably take a while to do) and if we come to any conclusions will let everyone know our conclusions.
Sean
