Re: Call for testing: OpenSSH 6.7

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

 



Oh dear ... it is to laugh .. I just realized what the problem is.  This is
the failing compile example ...

gcc -o regress/unittests/sshbuf/test_sshbuf -L. -Lopenbsd-compat/
-Wl,-blibpath:/opt/phs/lib:/opt/freeware/lib:/usr/lib:/usr/ccs/lib
-L/opt/phs/lib -L/opt/freeware/lib -L/usr/lib -L/usr/ccs/lib
-Wl,-blibpath:/usr/lib:/lib regress/unittests/sshbuf/tests.o
regress/unittests/sshbuf/test_sshbuf.o
regress/unittests/sshbuf/test_sshbuf_getput_basic.o
regress/unittests/sshbuf/test_sshbuf_getput_crypto.o
regress/unittests/sshbuf/test_sshbuf_misc.o
regress/unittests/sshbuf/test_sshbuf_fuzz.o
regress/unittests/sshbuf/test_sshbuf_getput_fuzz.o
regress/unittests/sshbuf/test_sshbuf_fixed.o \
   * -L regress/unittests/test_helper -ltest_helper \*
    -lssh -lopenbsd-compat -lssh -lopenbsd-compat -lcrypto -lz -lpthread
collect2: library libtest_helper not found

The space between -L and the directory is what's causing the issue.  the
correct line would be
   * -Lregress/unittests/test_helper -ltest_helper \*

Should fixed be a simple edit  in the Makefile.in ... I'm surprised this
isn't broken elsewhere for the same reason.



On Tue, Aug 19, 2014 at 2:14 PM, Kevin Brott <kevin.brott@xxxxxxxxx> wrote:

> AIX6/7 + gcc 4.2.0/4.4.7 passes all tests fine with the library explicitly
> substituted for the -L -l construct.  I'll work out a patch that does this
> automagically as soon as I work out where it should go, unless someone has
> a better idea
>
> AIX native, HPX gcc+native, and Debian builds all continue to build/test.
>
>
> On Tue, Aug 19, 2014 at 12:55 PM, Kevin Brott <kevin.brott@xxxxxxxxx>
> wrote:
>
>> FAIL*1 on Centos 2.1 -> RHEL 5.10
>> FAIL*2 on RHEL 6.0 -> RHEL 6.4 and AIX 5.3 (using openssl 0.9.8k)
>>
>> The AIX gcc builds are still failing, but - if I replace this line:
>>   -L regress/unittests/test_helper -ltest_helper \
>> With this
>>   regress/unittests/test_helper/libtest_helper.a \
>> ....
>> then test_sshbuf and test_sshkey compile ok (both fail for the 'missing'
>> library) - and tests continue ... will report status when run is done.
>>
>>
>>
>> On Tue, Aug 19, 2014 at 8:54 AM, Kevin Brott <kevin.brott@xxxxxxxxx>
>> wrote:
>>
>>>
>>> New failures on older openssl ... will test against the RH 1.0.0-fips in
>>> a bit ...
>>>
>>> Using http://www.mindrot.org/openssh_snap/openssh-SNAP-20140820.tar.gz
>>>
>>> OS              Build_Target                CC
>>> OpenSSL       BUILD    TEST
>>> ==============  =========================== ================
>>> ============= ======   =================
>>> Centos 2.1      i386-redhat-linux           gcc 2.9.6
>>> 0.9.6b-engine FAIL*1
>>> RHEL 3.4        i386-redhat-linux           gcc 3.2.3-47
>>> 0.9.7a        FAIL*1
>>> AIX 5300-12-04  powerpc-ibm-aix5.3.0.0      gcc 4.2.0-3
>>> 0.9.8k        FAIL*2
>>>
>>> FAIL*1 - Shouldn't this have been caught by configure?
>>>      gcc -g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare
>>> -Wformat-security -fno-strict-aliasing -D_FORTIFY_SOURCE=2
>>> -fno-builtin-memset -std=gnu99  -I. -I.. -I. -I./..  -DHAVE_CONFIG_H -c
>>> openssl-compat.c
>>>      In file included from openssl-compat.c:32:
>>>      openssl-compat.h:28:2: #error OpenSSL 0.9.8f or greater is required
>>>      make[1]: *** [openssl-compat.o] Error 1
>>>      make[1]: Leaving directory `/usr/src/openssh/openbsd-compat'
>>>      make: *** [openbsd-compat/libopenbsd-compat.a] Error 2
>>>
>>> FAIL*2 - Different AIX failure on old openssl ...
>>>              gcc -g -O2 -Wall -Wpointer-arith -Wuninitialized
>>> -Wsign-compare -Wformat-security -Wno-pointer-sign -fno-strict-aliasing
>>> -D_FORTIFY_SOURCE=2 -ftrapv -fno-builtin-memset  -I. -I.. -I. -I./..
>>> -DHAVE_CONFIG_H -c port-aix.c
>>>      In file included from ../key.h:29,
>>>                       from port-aix.c:31:
>>>      ../sshkey.h:34:24: error: openssl/ec.h: No such file or directory
>>>      In file included from ../key.h:29,
>>>                       from port-aix.c:31:
>>>      ../sshkey.h:103: error: expected specifier-qualifier-list before
>>> 'EC_KEY'
>>>      ../sshkey.h:149: error: expected ')' before '*' token
>>>      ../sshkey.h:151: warning: type defaults to 'int' in declaration of
>>> 'EC_GROUP'
>>>      ../sshkey.h:151: error: expected ';', ',' or ')' before '*' token
>>>      ../sshkey.h:152: warning: type defaults to 'int' in declaration of
>>> 'EC_KEY'
>>>      ../sshkey.h:152: error: expected ';', ',' or ')' before '*' token
>>>      ../sshkey.h:170: warning: type defaults to 'int' in declaration of
>>> 'EC_GROUP'
>>>      ../sshkey.h:170: error: expected ';', ',' or ')' before '*' token
>>>      ../sshkey.h:171: warning: type defaults to 'int' in declaration of
>>> 'EC_KEY'
>>>      ../sshkey.h:171: error: expected ';', ',' or ')' before '*' token
>>>      In file included from port-aix.c:31:
>>>      ../key.h:85: warning: type defaults to 'int' in declaration of
>>> 'EC_GROUP'
>>>      ../key.h:85: error: expected ';', ',' or ')' before '*' token
>>>      ../key.h:86: warning: type defaults to 'int' in declaration of
>>> 'EC_KEY'
>>>      ../key.h:86: error: expected ';', ',' or ')' before '*' token
>>>      make: The error code from the last command is 1.
>>>
>>>
>>>
>>>
>>> On Mon, Aug 18, 2014 at 9:26 PM, Damien Miller <djm@xxxxxxxxxxx> wrote:
>>>
>>>>
>>>>
>>>> On Mon, 18 Aug 2014, Kevin Brott wrote:
>>>>
>>>> > Will test this out in the morning.  Will this be in the 0820 snapshot?
>>>>
>>>> Yes, it should be.
>>>>
>>>> -d
>>>>
>>>
>>>
>>>
>>> --
>>> # include <stddisclaimer.h>
>>> /* Kevin  Brott <Kevin.Brott@xxxxxxxxx> */
>>>
>>>
>>
>>
>> --
>> # include <stddisclaimer.h>
>> /* Kevin  Brott <Kevin.Brott@xxxxxxxxx> */
>>
>>
>
>
> --
> # include <stddisclaimer.h>
> /* Kevin  Brott <Kevin.Brott@xxxxxxxxx> */
>
>


-- 
# include <stddisclaimer.h>
/* Kevin  Brott <Kevin.Brott@xxxxxxxxx> */
_______________________________________________
openssh-unix-dev mailing list
openssh-unix-dev@xxxxxxxxxxx
https://lists.mindrot.org/mailman/listinfo/openssh-unix-dev




[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux