Re: connection between 2 clients in one VPN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



(sorry for the late answer)

On 05.04.19 18:13, Nikos Mavrogiannopoulos wrote:
> That's how the tun device is. Have you pushed the routes of your local
> network to your clients? Most likely the clients do not know that the
> network is handled by the vpn server.

A local routing table on a client looks like that:

$ route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
0.0.0.0         10.12.1.254     0.0.0.0         UG    0      0        0
enp6s0
0.0.0.0         10.12.1.254     0.0.0.0         UG    100    0        0
enp6s0
8.8.8.8         0.0.0.0         255.255.255.255 UH    0      0        0 tun0
10.12.0.0       0.0.0.0         255.255.0.0     U     100    0        0
enp6s0
91.229.57.28    10.12.1.254     255.255.255.255 UGH   0      0        0
enp6s0
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0
enp6s0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 tun0

The last entry seems to be okay - I think? On the second client it is
simliar.

In /etc/ocserv.conf I have set:

ipv4-network = 192.168.1.0
ipv4-netmask = 255.255.255.0

route = 192.168.1.0/255.255.255.0

# not really sure, if that is necessary
expose-iroutes = true

(I hope, thats all, that is relevant...)

And the clients get their expected IP-address (e.g. 192.168.1.31,
192.168.1.41)

Best regards, Wolfgang


_______________________________________________
openconnect-devel mailing list
openconnect-devel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/openconnect-devel



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux