the issue was about editing radiusclient server file in windows. although shared secret was accurately saved in server file but it nice to do it terminal On Sat, May 2, 2015 at 9:58 PM, Mani Behrouz <manibehrouz2 at gmail.com> wrote: > May 2 19:26:24 iceserver ocserv[4543]: sec-mod: using 'radius' > authentication to authenticate user (session: hnLkk) > May 2 19:26:25 iceserver ocserv[4543]: radius-auth: communicating > username (test) and password > May 2 19:26:26 iceserver ocserv[4543]: rc_check_reply: received > invalid reply digest from RADIUS server > May 2 19:26:26 iceserver ocserv[4543]: radius-auth: communicating > username (test) and password > May 2 19:26:27 iceserver ocserv[4543]: rc_check_reply: received > invalid reply digest from RADIUS server > May 2 19:26:27 iceserver ocserv[4543]: radius-auth: communicating > username (test) and password > May 2 19:26:28 iceserver ocserv[4543]: rc_check_reply: received > invalid reply digest from RADIUS server > > Message from syslogd at iceserver at May 2 19:26:28 ... > ocserv[4543]: radius-auth: error authenticating user 'test' > > Broadcast message from systemd-journald at iceserver (Sat 2015-05-02 > 19:26:28 CEST): > > ocserv[4543]: radius-auth: error authenticating user 'test' > > May 2 19:26:28 iceserver ocserv[4543]: sec-mod: error processing data > for 'sm: auth cont' command (-3) > May 2 19:26:28 iceserver ocserv[4580]: worker[test]: 5.*.*.* > worker-auth.c:1403: failed authentication for 'test' > May 2 19:26:28 iceserver ocserv[4542]: main: 5.*.*.*:19503 user disconnected > > > On Sat, May 2, 2015 at 9:55 PM, Mani Behrouz <manibehrouz2 at gmail.com> wrote: >> I have install from repo. but it dosnt send password in cleartext type >> to radius server >> I have also installed ocserv 0.10.4 in other server but it's fine. I >> have this issue with repo build >> >> User-Name = "test" >> User-Password = "\377\236\337?7&/(+\037;!Y\366\230" >> Calling-Station-Id = "5.*.*.*" >> Service-Type = Authenticate-Only >> NAS-Port = 0 >> NAS-IP-Address = 178.*.*.*
