May 2 19:26:24 iceserver ocserv[4543]: sec-mod: using 'radius' authentication to authenticate user (session: hnLkk) May 2 19:26:25 iceserver ocserv[4543]: radius-auth: communicating username (test) and password May 2 19:26:26 iceserver ocserv[4543]: rc_check_reply: received invalid reply digest from RADIUS server May 2 19:26:26 iceserver ocserv[4543]: radius-auth: communicating username (test) and password May 2 19:26:27 iceserver ocserv[4543]: rc_check_reply: received invalid reply digest from RADIUS server May 2 19:26:27 iceserver ocserv[4543]: radius-auth: communicating username (test) and password May 2 19:26:28 iceserver ocserv[4543]: rc_check_reply: received invalid reply digest from RADIUS server Message from syslogd at iceserver at May 2 19:26:28 ... ocserv[4543]: radius-auth: error authenticating user 'test' Broadcast message from systemd-journald at iceserver (Sat 2015-05-02 19:26:28 CEST): ocserv[4543]: radius-auth: error authenticating user 'test' May 2 19:26:28 iceserver ocserv[4543]: sec-mod: error processing data for 'sm: auth cont' command (-3) May 2 19:26:28 iceserver ocserv[4580]: worker[test]: 5.*.*.* worker-auth.c:1403: failed authentication for 'test' May 2 19:26:28 iceserver ocserv[4542]: main: 5.*.*.*:19503 user disconnected On Sat, May 2, 2015 at 9:55 PM, Mani Behrouz <manibehrouz2 at gmail.com> wrote: > I have install from repo. but it dosnt send password in cleartext type > to radius server > I have also installed ocserv 0.10.4 in other server but it's fine. I > have this issue with repo build > > User-Name = "test" > User-Password = "\377\236\337?7&/(+\037;!Y\366\230" > Calling-Station-Id = "5.*.*.*" > Service-Type = Authenticate-Only > NAS-Port = 0 > NAS-IP-Address = 178.*.*.*
