On Thu, Apr 30, 2015 at 10:41 AM, Mauro Gaspari <ilvipero at dazuzu.com> wrote: > Hello > I recently found this project, and it looks very interesting. I have > been trying to install versions 0.10.2, 0.10.3, and 0.10.4 on a few > machines (and virtual machines) based on debian, ubuntu, and openSUSE. > So far, I had no issues on x86 or x86_64, but I was not able to > complete the "make" process on arm architecture (debian). > I have a couple of testing boards, banana pi bpi-r1 with bananian > installed (debian 7 arm). > 1. First issue was with debian wheezy dependencies. wheezy backports > repository (deb http://http.debian.net/debian wheezy-backports main) > includes the needed package "libgnutls28-dev" for the x86 and x86_64 > architectures, but not for armhf yet. > Since I am on testing phase, I quickly resolved changing my repos from > wheezy to testing. I am pretty sure this will be solved in the future, > just wanted to report that, hopefully it helps someone. > 2. once all dependencies were installed, I tried to install ocserv by > running ./configure --prefix=/usr --sysconfdir=/etc && make && make > install > this works perfectly on x86 and x86_64, but fails on arm. I have all > required packages per README file. Since the output is very long, I > will only paste a few lines here. > Any help will be greatly appreciated.I am available to help for > further testing, troubleshooting. If needed I can connect one spare > device to a public IP and provide remote access for as long as it > takes. For non-x86/x86-64 systems it matters to have the latest libseccomp. If you have it and you still see that issue, most probably your platform isn't supported by seccomp. You'll have to use "--disable-seccomp" with configure. regards, Nikos