Hello I recently found this project, and it looks very interesting. I have been trying to install versions 0.10.2, 0.10.3, and 0.10.4 on a few machines (and virtual machines) based on debian, ubuntu, and openSUSE. So far, I had no issues on x86 or x86_64, but I was not able to complete the "make" process on arm architecture (debian). I have a couple of testing boards, banana pi bpi-r1 with bananian installed (debian 7 arm). 1. First issue was with debian wheezy dependencies. wheezy backports repository (deb http://http.debian.net/debian wheezy-backports main) includes the needed package "libgnutls28-dev" for the x86 and x86_64 architectures, but not for armhf yet. Since I am on testing phase, I quickly resolved changing my repos from wheezy to testing. I am pretty sure this will be solved in the future, just wanted to report that, hopefully it helps someone. 2. once all dependencies were installed, I tried to install ocserv by running ./configure --prefix=/usr --sysconfdir=/etc && make && make install this works perfectly on x86 and x86_64, but fails on arm. I have all required packages per README file. Since the output is very long, I will only paste a few lines here. Any help will be greatly appreciated.I am available to help for further testing, troubleshooting. If needed I can connect one spare device to a public IP and provide remote access for as long as it takes. Best Regards Mauro Begin Output from ./config && make && make install ... CC main-user.o CC worker-misc.o CC route-add.o CC worker-privs.o In file included from worker-privs.c:26:0: worker-privs.c: In function ?disable_system_calls?: worker-privs.c:41:46: error: ?__NR_time? undeclared (first use in this function) ret = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(name), __VA_ARGS__); \ ^ worker-privs.c:54:2: note: in expansion of macro ?ADD_SYSCALL? ADD_SYSCALL(time, 0); ^ worker-privs.c:41:46: note: each undeclared identifier is reported only once for each function it appears in ret = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(name), __VA_ARGS__); \ ^ worker-privs.c:54:2: note: in expansion of macro ?ADD_SYSCALL? ADD_SYSCALL(time, 0); ^ worker-privs.c:41:46: error: ?__NR_alarm? undeclared (first use in this function) ret = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(name), __VA_ARGS__); \ ^ worker-privs.c:61:2: note: in expansion of macro ?ADD_SYSCALL? ADD_SYSCALL(alarm, 0); ^ worker-privs.c:41:46: error: ?__NR_select? undeclared (first use in this function) ret = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(name), __VA_ARGS__); \ ^ worker-privs.c:89:2: note: in expansion of macro ?ADD_SYSCALL? ADD_SYSCALL(select, 0); ^ Makefile:1459: recipe for target 'worker-privs.o' failed make[4]: *** [worker-privs.o] Error 1 make[4]: Leaving directory '/usr/src/ocserv-0.10.4/src' Makefile:1481: recipe for target 'all-recursive' failed make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory '/usr/src/ocserv-0.10.4/src' Makefile:1143: recipe for target 'all' failed make[2]: *** [all] Error 2 make[2]: Leaving directory '/usr/src/ocserv-0.10.4/src' Makefile:1000: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/usr/src/ocserv-0.10.4' Makefile:940: recipe for target 'all' failed make: *** [all] Error 2
