in ip-lease.c
static
int get_ipv6_lease(main_server_st* s, struct proc_st* proc)
{
...
if (proc->config.ipv6_network && proc->config.ipv6_prefix) {
c_network = proc->config.ipv6_network;
c_netmask = ipv6_prefix_to_mask(proc, proc->config.ipv6_prefix);
} else {
c_network = s->config->network.ipv6;
// c_netmask = ipv6_prefix_to_mask(proc, proc->config.ipv6_prefix);
c_netmask = ipv6_prefix_to_mask(proc, s->config->network.ipv6_prefix);
}
int get_ip_leases(main_server_st *s, struct proc_st *proc)
{
...
// if (proc->ipv6 && proc->ipv4->db) {
if (proc->ipv6 && proc->ipv6->db) {
sskaje at gmail.com
https://sskaje.me/
On Sun, Dec 28, 2014 at 10:11 PM, sskaje <sskaje at gmail.com> wrote:
> I'm trying to find out what's changed between 0.8.9 and 0.9.0, this
> time ws->config->ipv6_network is null, and ws->vinfo.ipv6 also null.
>
>
>
> sskaje at gmail.com
> https://sskaje.me/
>
>
> On Sun, Dec 28, 2014 at 3:52 PM, Nikos Mavrogiannopoulos
> <nmav at gnutls.org> wrote:
>> On Sun, 2014-12-28 at 12:00 +0800, sskaje wrote:
>>> I tried:
>>>
>>> if (strncasecmp(req->user_agent, "Open Any", 8) == 0) {
>>> if (strncmp(req->user_agent, "Open AnyConnect VPN Agent
>>> v3", 28) == 0)
>>> req->user_agent_type = AGENT_OPENCONNECT_V3;
>>> else
>>> req->user_agent_type = AGENT_OPENCONNECT;
>>> } else if (strncasecmp(req->user_agent, "Cisco Any", 8) == 0) {
>>> req->user_agent_type = AGENT_OPENCONNECT;
>>> }
>>>
>>>
>>> IPv6 address is recognized by AnyConnect for iOS, but with a 'null'
>>> cidr. I tried the changes I made in worker-auth.c, same.
>>
>> Based on David's comment, I've modified worker-vpn.c in master to send
>> IPv6 addresses together with prefix in both anyconnect and openconnect.
>> Could you try it?
>>
>> regards,
>> Nikos
>>
>>
