Weird, I made these changes, headers are sent correctly like ocserv[24892]: worker[sskaje]: 61.149.12.68:58680 sending IPv6 2400:8900:e000:xxxx:xxxx:2f:f9e5:c701/64 ocserv[24892]: worker[sskaje]: 61.149.12.68:58680 ============= X-CSTP-Address: 2400:8900:e000:xxxx:xxxx:2f:f9e5:c701/64 but this time, in AnyConnect debug log, v6 2400:8900:e000:xxxx:xxxx:2f:f9e5:c701/64/null (fake ? no) why always null... and previous lines, client ipv6 address: ip above client ipv6 mask: unknown maybe there is another format ? like another x-cstp-address + x-cstp-netmask ? sskaje at gmail.com https://sskaje.me/ On Sun, Dec 28, 2014 at 11:39 PM, sskaje <sskaje at gmail.com> wrote: > in ip-lease.c > > static > int get_ipv6_lease(main_server_st* s, struct proc_st* proc) > { > ... > if (proc->config.ipv6_network && proc->config.ipv6_prefix) { > c_network = proc->config.ipv6_network; > c_netmask = ipv6_prefix_to_mask(proc, proc->config.ipv6_prefix); > } else { > c_network = s->config->network.ipv6; > // c_netmask = ipv6_prefix_to_mask(proc, proc->config.ipv6_prefix); > c_netmask = ipv6_prefix_to_mask(proc, s->config->network.ipv6_prefix); > } > > > int get_ip_leases(main_server_st *s, struct proc_st *proc) > { > ... > // if (proc->ipv6 && proc->ipv4->db) { > if (proc->ipv6 && proc->ipv6->db) { > > > > sskaje at gmail.com > https://sskaje.me/ > > > On Sun, Dec 28, 2014 at 10:11 PM, sskaje <sskaje at gmail.com> wrote: >> I'm trying to find out what's changed between 0.8.9 and 0.9.0, this >> time ws->config->ipv6_network is null, and ws->vinfo.ipv6 also null. >> >> >> >> sskaje at gmail.com >> https://sskaje.me/ >> >> >> On Sun, Dec 28, 2014 at 3:52 PM, Nikos Mavrogiannopoulos >> <nmav at gnutls.org> wrote: >>> On Sun, 2014-12-28 at 12:00 +0800, sskaje wrote: >>>> I tried: >>>> >>>> if (strncasecmp(req->user_agent, "Open Any", 8) == 0) { >>>> if (strncmp(req->user_agent, "Open AnyConnect VPN Agent >>>> v3", 28) == 0) >>>> req->user_agent_type = AGENT_OPENCONNECT_V3; >>>> else >>>> req->user_agent_type = AGENT_OPENCONNECT; >>>> } else if (strncasecmp(req->user_agent, "Cisco Any", 8) == 0) { >>>> req->user_agent_type = AGENT_OPENCONNECT; >>>> } >>>> >>>> >>>> IPv6 address is recognized by AnyConnect for iOS, but with a 'null' >>>> cidr. I tried the changes I made in worker-auth.c, same. >>> >>> Based on David's comment, I've modified worker-vpn.c in master to send >>> IPv6 addresses together with prefix in both anyconnect and openconnect. >>> Could you try it? >>> >>> regards, >>> Nikos >>> >>>
