---------- Forwarded message --------- Od: Milan Buška <milan.buska@xxxxxxxxx> Date: st 6. 5. 2020 v 16:15 Subject: Re: GeForce(R) GT 710 1GB PCIE x 1 on arm64 To: Ilia Mirkin <imirkin@xxxxxxxxxxxx> Here is: # dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x411fd073] [ 0.000000] Linux version 5.6.10-zotac (root@saux) (gcc version 9.3.0 (SAUX Aarch64)) #1 SMP PREEMPT Tue May 5 22:16:40 CEST 2020 [ 0.000000] Machine model: NVIDIA Jetson TX2 Developer Kit [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000002771fffff] [ 0.000000] NUMA: NODE_DATA [mem 0x274e1d100-0x274e1efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002771fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000efffffff] [ 0.000000] node 0: [mem 0x00000000f0200000-0x00000002757fffff] [ 0.000000] node 0: [mem 0x0000000275e00000-0x0000000275ffffff] [ 0.000000] node 0: [mem 0x0000000276600000-0x00000002767fffff] [ 0.000000] node 0: [mem 0x0000000277000000-0x00000002771fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000002771fffff] [ 0.000000] On node 0 totalpages: 2055168 [ 0.000000] DMA zone: 4096 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 262144 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 4096 pages used for memmap [ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu s53272 r8192 d32744 u94208 [ 0.000000] pcpu-alloc: s53272 r8192 d32744 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: detected: ARM erratum 1319367 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2022968 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mmcblk2p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 video=nouveau [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB) [ 0.000000] Memory: 7934464K/8220672K available (12348K kernel code, 1968K rwdata, 7104K rodata, 5312K init, 462K bss, 253440K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x2a8/0x434 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008440] Console: colour dummy device 80x25 [ 0.013065] printk: console [tty0] enabled [ 0.017328] printk: bootconsole [uart8250] disabled [ 0.022452] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022464] pid_max: default: 32768 minimum: 301 [ 0.022516] LSM: Security Framework initializing [ 0.022575] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.022609] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.054464] rcu: Hierarchical SRCU implementation. [ 0.063372] Tegra Revision: A02 SKU: 220 CPU Process: 0 SoC Process: 0 [ 0.063529] EFI services will not be available. [ 0.070490] smp: Bringing up secondary CPUs ... [ 0.103111] CPU features: detected: Kernel page table isolation (KPTI) [ 0.103142] Detected PIPT I-cache on CPU1 [ 0.103154] CPU features: SANITY CHECK: Unexpected variation in SYS_CTR_EL0. Boot CPU: 0x0000008444c004, CPU1: 0x0000009444c004 [ 0.103164] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64DFR0_EL1. Boot CPU: 0x00000010305106, CPU1: 0x00000010305116 [ 0.103178] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_DFR0_EL1. Boot CPU: 0x00000003010066, CPU1: 0x00000003001066 [ 0.103191] CPU features: Unsupported CPU feature variation detected. [ 0.103235] CPU1: Booted secondary processor 0x0000000000 [0x4e0f0030] [ 0.134851] Detected PIPT I-cache on CPU2 [ 0.134863] CPU features: SANITY CHECK: Unexpected variation in SYS_CTR_EL0. Boot CPU: 0x0000008444c004, CPU2: 0x0000009444c004 [ 0.134872] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64DFR0_EL1. Boot CPU: 0x00000010305106, CPU2: 0x00000010305116 [ 0.134885] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_DFR0_EL1. Boot CPU: 0x00000003010066, CPU2: 0x00000003001066 [ 0.134924] CPU2: Booted secondary processor 0x0000000001 [0x4e0f0030] [ 0.166768] Detected PIPT I-cache on CPU3 [ 0.166798] CPU3: Booted secondary processor 0x0000000101 [0x411fd073] [ 0.198807] Detected PIPT I-cache on CPU4 [ 0.198827] CPU4: Booted secondary processor 0x0000000102 [0x411fd073] [ 0.230850] Detected PIPT I-cache on CPU5 [ 0.230869] CPU5: Booted secondary processor 0x0000000103 [0x411fd073] [ 0.230911] smp: Brought up 1 node, 6 CPUs [ 0.231002] SMP: Total of 6 processors activated. [ 0.231010] CPU features: detected: 32-bit EL0 Support [ 0.231017] CPU features: detected: CRC32 instructions [ 1.067178] CPU: All CPU(s) started at EL2 [ 1.067221] alternatives: patching kernel code [ 1.068792] devtmpfs: initialized [ 1.071545] KASLR disabled due to lack of seed [ 1.071769] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.071787] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 1.072319] pinctrl core: initialized pinctrl subsystem [ 1.073007] thermal_sys: Registered thermal governor 'step_wise' [ 1.073009] thermal_sys: Registered thermal governor 'power_allocator' [ 1.073345] DMI not present or invalid. [ 1.073677] NET: Registered protocol family 16 [ 1.074497] DMA: preallocated 256 KiB pool for atomic allocations [ 1.074512] audit: initializing netlink subsys (disabled) [ 1.074605] audit: type=2000 audit(0.244:1): state=initialized audit_enabled=0 res=1 [ 1.075234] cpuidle: using governor menu [ 1.075428] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 1.075577] ASID allocator initialised with 32768 entries [ 1.076232] Serial: AMBA PL011 UART driver [ 1.087732] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.087746] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.087755] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.087762] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.089126] cryptd: max_cpu_qlen set to 1000 [ 1.091498] ACPI: Interpreter disabled. [ 1.092609] iommu: Default domain type: Translated [ 1.092734] vgaarb: loaded [ 1.092899] SCSI subsystem initialized [ 1.092996] libata version 3.00 loaded. [ 1.093103] usbcore: registered new interface driver usbfs [ 1.093129] usbcore: registered new interface driver hub [ 1.093186] usbcore: registered new device driver usb [ 1.093526] pps_core: LinuxPPS API ver. 1 registered [ 1.093534] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 1.093551] PTP clock support registered [ 1.093623] EDAC MC: Ver: 3.0.0 [ 1.094308] FPGA manager framework [ 1.094352] Advanced Linux Sound Architecture Driver Initialized. [ 1.094815] clocksource: Switched to clocksource arch_sys_counter [ 1.094939] VFS: Disk quotas dquot_6.6.0 [ 1.094981] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.095094] pnp: PnP ACPI: disabled [ 1.098416] NET: Registered protocol family 2 [ 1.098643] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.098718] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.099055] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.099670] TCP: Hash tables configured (established 65536 bind 65536) [ 1.099762] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.099890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.100095] NET: Registered protocol family 1 [ 1.100351] RPC: Registered named UNIX socket transport module. [ 1.100360] RPC: Registered udp transport module. [ 1.100366] RPC: Registered tcp transport module. [ 1.100372] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.100382] PCI: CLS 0 bytes, default 64 [ 1.101384] kvm [1]: IPA Size Limit: 40bits [ 1.102945] kvm [1]: Hyp mode initialized successfully [ 1.114296] Initialise system trusted keyrings [ 1.114582] workingset: timestamp_bits=44 max_order=21 bucket_order=0 [ 1.124805] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.125844] NFS: Registering the id_resolver key type [ 1.125884] Key type id_resolver registered [ 1.125903] Key type id_legacy registered [ 1.125927] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.126150] 9p: Installing v9fs 9p2000 file system support [ 1.130588] Key type asymmetric registered [ 1.130634] Asymmetric key parser 'x509' registered [ 1.130688] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.130714] io scheduler mq-deadline registered [ 1.130732] io scheduler kyber registered [ 1.134117] tegra-xusb-padctl 3520000.padctl: failed to read calibration fuse: -517 [ 1.142583] EINJ: ACPI disabled. [ 1.155545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.157706] SuperH (H)SCI(F) driver initialized [ 1.158125] msm_serial: driver initialized [ 1.159812] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.159841] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.159863] arm-smmu 12000000.iommu: stage 1 translation [ 1.159883] arm-smmu 12000000.iommu: stage 2 translation [ 1.159903] arm-smmu 12000000.iommu: nested translation [ 1.159925] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.159976] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.160003] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 1.160026] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.160049] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.171037] loop: module loaded [ 1.174752] libphy: Fixed MDIO Bus: probed [ 1.175111] tun: Universal TUN/TAP device driver, 1.6 [ 1.175800] thunder_xcv, ver 1.0 [ 1.175868] thunder_bgx, ver 1.0 [ 1.175924] nicpf, ver 1.0 [ 1.176402] hclge is initializing [ 1.176609] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.176643] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.176725] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.176752] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.176828] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 1.176877] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.176949] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.176981] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.177238] sky2: driver version 1.30 [ 1.177886] VFIO - User Level meta-driver version: 0.3 [ 1.179316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.179344] ehci-pci: EHCI PCI platform driver [ 1.179388] ehci-platform: EHCI generic platform driver [ 1.179496] ehci-orion: EHCI orion driver [ 1.179572] ehci-exynos: EHCI Exynos driver [ 1.179641] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.179686] ohci-pci: OHCI PCI platform driver [ 1.179732] ohci-platform: OHCI generic platform driver [ 1.179838] ohci-exynos: OHCI Exynos driver [ 1.180268] tegra-xusb 3530000.usb: Adding to iommu group 0 [ 1.180604] usbcore: registered new interface driver usb-storage [ 1.181852] mousedev: PS/2 mouse device common for all mice [ 1.183057] i2c /dev entries driver [ 1.186847] sdhci: Secure Digital Host Controller Interface driver [ 1.186879] sdhci: Copyright(c) Pierre Ossman [ 1.187193] Synopsys Designware Multimedia Card Interface Driver [ 1.187829] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.188291] sdhci-tegra 3400000.sdhci: Adding to iommu group 1 [ 1.188580] sdhci-tegra 3440000.sdhci: Adding to iommu group 2 [ 1.189114] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 1.190272] ledtrig-cpu: registered to indicate activity on CPUs [ 1.191435] usbcore: registered new interface driver usbhid [ 1.191466] usbhid: USB HID core driver [ 1.195987] NET: Registered protocol family 17 [ 1.196237] 9pnet: Installing 9P2000 support [ 1.196331] Key type dns_resolver registered [ 1.196958] registered taskstats version 1 [ 1.197002] Loading compiled-in X.509 certificates [ 1.197365] tegra-bpmp bpmp: Adding to iommu group 4 [ 1.197843] tegra-bpmp bpmp: firmware: 69fa4e41a01fc02a4db1adf71922a54c [ 1.200370] max77620 0-003c: PMIC Version OTP:0x45 and ES:0x8 [ 1.206359] max77620-sd0: supplied by VDD_5V0_SYS [ 1.206597] VDD_DDR_1V1_PMIC: Bringing 1125000uV into 1100000-1100000uV [ 1.208955] max77620-sd1: supplied by VDD_5V0_SYS [ 1.209990] max77620-sd2: supplied by VDD_5V0_SYS [ 1.211092] max77620-sd3: supplied by VDD_5V0_SYS [ 1.212334] max77620-ldo0: supplied by VDD_5V0_SYS [ 1.212727] max77620-ldo1: supplied by VDD_5V0_SYS [ 1.213790] max77620-ldo2: supplied by VDD_5V0_SYS [ 1.215193] max77620-ldo3: supplied by VDD_5V0_SYS [ 1.216133] max77620-ldo4: supplied by VDD_1V8 [ 1.216209] VDD_RTC: Bringing 800000uV into 1000000-1000000uV [ 1.217241] max77620-ldo5: supplied by VDD_5V0_SYS [ 1.217327] VDDIO_SDMMC3_AP: Bringing 1800000uV into 2800000-2800000uV [ 1.218181] max77620-ldo6: supplied by VDD_1V8 [ 1.219254] max77620-ldo7: supplied by AVDD_DSI_CSI_1V2 [ 1.219334] VDD_HDMI_1V05: Bringing 1000000uV into 1050000-1050000uV [ 1.220272] max77620-ldo8: supplied by AVDD_DSI_CSI_1V2 [ 1.220337] VDD_PEX_1V05: Bringing 1000000uV into 1050000-1050000uV [ 2.396019] max77686-rtc max77620-rtc: registered as rtc0 [ 2.411115] random: fast init done [ 3.664208] random: crng init done [ 3.959266] VDD_1V8_AP: supplied by VDD_1V8 [ 3.962047] tegra-xusb-padctl 3520000.padctl: failed to read calibration fuse: -517 [ 3.965934] tegra-pcie 10003000.pcie: Adding to iommu group 5 [ 3.966435] tegra-pcie 10003000.pcie: 4x1, 1x1 configuration [ 3.968057] tegra-pcie 10003000.pcie: probing port 0, using 4 lanes [ 3.970121] tegra-pcie 10003000.pcie: probing port 1, using 0 lanes [ 3.972183] tegra-pcie 10003000.pcie: probing port 2, using 1 lanes [ 5.260316] tegra-pcie 10003000.pcie: link 1 down, ignoring [ 6.479410] tegra-pcie 10003000.pcie: link 2 down, ignoring [ 6.479579] tegra-pcie 10003000.pcie: PCI host bridge to bus 0000:00 [ 6.479602] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 6.479627] pci_bus 0000:00: root bus resource [mem 0x50100000-0x57ffffff] [ 6.479646] pci_bus 0000:00: root bus resource [mem 0x58000000-0x7fffffff pref] [ 6.479668] pci_bus 0000:00: root bus resource [bus 00-ff] [ 6.479850] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400 [ 6.479887] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 6.479916] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 6.479993] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 6.480041] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 6.480118] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.480141] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 6.482485] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 6.482521] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 6.482576] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 6.482607] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 6.482635] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x6 may corrupt adjacent RW1C bits [ 6.482794] pci 0000:01:00.0: [10de:128b] type 00 class 0x030000 [ 6.482931] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00ffffff] [ 6.482976] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x07ffffff 64bit pref] [ 6.483022] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x01ffffff 64bit pref] [ 6.483056] pci 0000:01:00.0: reg 0x24: [io 0x0000-0x007f] [ 6.483087] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 6.483313] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:01.0 (capable of 32.000 Gb/s with 5 GT/s x8 link) [ 6.483463] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 6.483556] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300 [ 6.483648] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00003fff] [ 6.485344] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 6.485368] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0x1a may corrupt adjacent RW1C bits [ 6.485411] pci 0000:00:01.0: BAR 15: assigned [mem 0x58000000-0x63ffffff 64bit pref] [ 6.485431] pci 0000:00:01.0: BAR 14: assigned [mem 0x50800000-0x51ffffff] [ 6.485448] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x1fff] [ 6.485471] pci 0000:01:00.0: BAR 1: assigned [mem 0x58000000-0x5fffffff 64bit pref] [ 6.485510] pci 0000:01:00.0: BAR 3: assigned [mem 0x60000000-0x61ffffff 64bit pref] [ 6.485547] pci 0000:01:00.0: BAR 0: assigned [mem 0x51000000-0x51ffffff] [ 6.485569] pci 0000:01:00.0: BAR 6: assigned [mem 0x50800000-0x5087ffff pref] [ 6.485588] pci 0000:01:00.1: BAR 0: assigned [mem 0x50880000-0x50883fff] [ 6.485610] pci 0000:01:00.0: BAR 5: assigned [io 0x1000-0x107f] [ 6.485631] pci 0000:00:01.0: PCI bridge to [bus 01] [ 6.485648] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 6.485668] pci 0000:00:01.0: bridge window [mem 0x50800000-0x51ffffff] [ 6.485691] pci 0000:00:01.0: bridge window [mem 0x58000000-0x63ffffff 64bit pref] [ 6.485760] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 6.485857] pcieport 0000:00:01.0: Adding to iommu group 5 [ 6.485930] pcieport 0000:00:01.0: enabling device (0000 -> 0003) [ 6.486051] pcieport 0000:00:01.0: PME: Signaling with IRQ 40 [ 6.486378] pcieport 0000:00:01.0: AER: enabled with IRQ 40 [ 6.486714] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 6.488429] printk: console [ttyS0] disabled [ 6.488494] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 23, base_baud = 25500000) is a Tegra [ 8.274504] printk: console [ttyS0] enabled [ 8.280831] tegra_rtc c2a0000.rtc: registered as rtc1 [ 8.285923] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 8.310453] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.315311] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 8.373916] mmc0: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit [ 8.390274] mmc1: CQHCI version 5.10 [ 8.421160] mmc1: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 8.429306] SD_CARD_SW_PWR: supplied by VDD_3V3_SYS [ 8.436338] VDD_HDMI_5V0: supplied by VDD_5V0_SYS [ 8.441647] VDD_USB0: supplied by VDD_5V0_SYS [ 8.446328] VDD_USB1: supplied by VDD_5V0_SYS [ 8.452028] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 8.465559] tegra-xusb 3530000.usb: Firmware timestamp: 2019-07-08 19:32:42 UTC [ 8.473136] tegra-xusb 3530000.usb: xHCI Host Controller [ 8.478628] tegra-xusb 3530000.usb: new USB bus registered, assigned bus number 1 [ 8.487255] tegra-xusb 3530000.usb: hcc params 0x0184fd25 hci version 0x100 quirks 0x0000000000010010 [ 8.496685] tegra-xusb 3530000.usb: irq 33, io mem 0x03530000 [ 8.503386] hub 1-0:1.0: USB hub found [ 8.507405] hub 1-0:1.0: 4 ports detected [ 8.511897] tegra-xusb 3530000.usb: xHCI Host Controller [ 8.517417] tegra-xusb 3530000.usb: new USB bus registered, assigned bus number 2 [ 8.525069] tegra-xusb 3530000.usb: Host supports USB 3.0 SuperSpeed [ 8.531671] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.541006] hub 2-0:1.0: USB hub found [ 8.545647] hub 2-0:1.0: 3 ports detected [ 8.551861] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.556926] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 8.602946] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 8.613332] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 8.650221] mmc1: Command Queue Engine enabled [ 8.654676] max77686-rtc max77620-rtc: setting system clock to 2000-01-02T01:56:45 UTC (946778205) [ 8.663700] mmc1: new HS400 MMC card at address 0001 [ 8.669069] mmcblk1: mmc1:0001 032G34 29.1 GiB [ 8.670182] ALSA device list: [ 8.673798] mmcblk1boot0: mmc1:0001 032G34 partition 1 4.00 MiB [ 8.676572] No soundcards found. [ 8.686655] mmcblk1boot1: mmc1:0001 032G34 partition 2 4.00 MiB [ 8.693651] mmcblk1rpmb: mmc1:0001 032G34 partition 3 4.00 MiB, chardev (235:0) [ 8.704320] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 [ 8.723772] Waiting for root device /dev/mmcblk2p1... [ 8.850853] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 8.928906] mmc2: new ultra high speed SDR104 SDHC card at address 0001 [ 8.935898] mmcblk2: mmc2:0001 SD32G 29.0 GiB [ 8.948924] mmcblk2: p1 p2 [ 9.018797] hub 1-2:1.0: USB hub found [ 9.023150] hub 1-2:1.0: 4 ports detected [ 9.139364] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using tegra-xusb [ 9.176816] hub 2-1:1.0: USB hub found [ 9.181354] hub 2-1:1.0: 4 ports detected [ 9.300221] EXT4-fs (mmcblk2p1): recovery complete [ 9.308115] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null) [ 9.314844] usb 1-2.1: new full-speed USB device number 3 using tegra-xusb [ 9.316224] VFS: Mounted root (ext4 filesystem) on device 179:97. [ 9.333279] devtmpfs: mounted [ 9.337465] Freeing unused kernel memory: 5312K [ 9.342075] Run /sbin/init as init process [ 9.346166] with arguments: [ 9.346167] /sbin/init [ 9.346168] with environment: [ 9.346170] HOME=/ [ 9.346171] TERM=linux [ 9.429475] input: 2.4G Mouse as /devices/platform/3530000.usb/usb1/1-2/1-2.1/1-2.1:1.0/0003:1EA7:0064.0001/input/input1 [ 9.440583] input: 2.4G Mouse as /devices/platform/3530000.usb/usb1/1-2/1-2.1/1-2.1:1.0/0003:1EA7:0064.0001/input/input2 [ 9.451600] hid-generic 0003:1EA7:0064.0001: input: USB HID v1.10 Mouse [2.4G Mouse] on usb-3530000.usb-2.1/input0 [ 9.542846] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 9.549748] udevd[218]: starting version 3.2.9 [ 9.613608] udevd[219]: starting eudev-3.2.9 [ 9.666365] input: USB USB Keyboard as /devices/platform/3530000.usb/usb1/1-2/1-2.2/1-2.2:1.0/0003:1A2C:2C27.0002/input/input3 [ 9.735146] hid-generic 0003:1A2C:2C27.0002: input: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-3530000.usb-2.2/input0 [ 9.750489] input: USB USB Keyboard Consumer Control as /devices/platform/3530000.usb/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:2C27.0003/input/input4 [ 9.823088] input: USB USB Keyboard System Control as /devices/platform/3530000.usb/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:2C27.0003/input/input5 [ 9.836014] hid-generic 0003:1A2C:2C27.0003: input: USB HID v1.10 Device [USB USB Keyboard] on usb-3530000.usb-2.2/input1 [ 9.898044] tegra-hda 3510000.hda: Adding to iommu group 6 [ 9.963273] input: jetson-tx2-hda HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input6 [ 9.973149] input: jetson-tx2-hda HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input7 [ 10.117602] dwc-eth-dwmac 2490000.ethernet: Adding to iommu group 7 [ 10.124019] dwc-eth-dwmac 2490000.ethernet: no reset control found [ 10.143356] dwc-eth-dwmac 2490000.ethernet: User ID: 0x10, Synopsys ID: 0x41 [ 10.150406] dwc-eth-dwmac 2490000.ethernet: DWMAC4/5 [ 10.155457] dwc-eth-dwmac 2490000.ethernet: DMA HW capability register supported [ 10.162843] dwc-eth-dwmac 2490000.ethernet: RX Checksum Offload Engine supported [ 10.170228] dwc-eth-dwmac 2490000.ethernet: TX Checksum insertion supported [ 10.177179] dwc-eth-dwmac 2490000.ethernet: Wake-Up On Lan supported [ 10.183541] dwc-eth-dwmac 2490000.ethernet: TSO supported [ 10.188935] dwc-eth-dwmac 2490000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 10.196842] dwc-eth-dwmac 2490000.ethernet: Enabled Flow TC (entries=8) [ 10.203448] dwc-eth-dwmac 2490000.ethernet: TSO feature enabled [ 10.209360] dwc-eth-dwmac 2490000.ethernet: SPH feature enabled [ 10.215271] dwc-eth-dwmac 2490000.ethernet: Using 40 bits DMA width [ 10.221708] libphy: stmmac: probed [ 12.885866] nouveau 0000:01:00.0: Adding to iommu group 5 [ 12.891373] nouveau 0000:01:00.0: enabling device (0000 -> 0003) [ 12.897619] nouveau 0000:01:00.0: NVIDIA GK208B (b060b0b1) [ 13.086682] nouveau 0000:01:00.0: bios: version 80.28.a6.00.10 [ 13.288626] nouveau 0000:01:00.0: fb: 1024 MiB DDR3 [ 14.749542] [TTM] Zone kernel: Available graphics memory: 3986272 KiB [ 14.756096] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 14.762626] [TTM] Initializing pool allocator [ 14.766999] [TTM] Initializing DMA pool allocator [ 14.771750] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 14.776808] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 14.782147] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 14.787905] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 14.793053] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 14.799504] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 00020010 [ 14.805948] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10 00000000 [ 14.812393] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031 [ 14.818056] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 14.823724] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 14.831977] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 14.841690] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.848322] [drm] Driver supports precise vblank timestamp query. [ 15.136647] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo 00000000d53241e4 [ 17.146929] nouveau 0000:01:00.0: DRM: core notifier timeout [ 19.146846] nouveau 0000:01:00.0: DRM: base-0: timeout [ 19.147554] Console: switching to colour frame buffer device 240x67 [ 19.446311] nouveau 0000:01:00.0: DRM: GPU lockup - switching to software fbcon [ 19.501043] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device [ 19.523471] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 19.666266] EXT4-fs (mmcblk2p1): re-mounted. Opts: discard [ 19.692357] EXT4-fs (mmcblk2p1): re-mounted. Opts: discard [ 19.742824] Adding 4160488k swap on /dev/mmcblk2p2. Priority:-2 extents:1 across:4160488k SS [ 19.799112] CPU1: shutdown [ 19.801921] psci: CPU1 killed (polled 0 ms) [ 19.835071] CPU2: shutdown [ 19.837876] psci: CPU2 killed (polled 0 ms) [ 28.550823] 8021q: 802.1Q VLAN Support v1.8 [ 28.731099] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 28.734427] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 28.741182] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 28.741186] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 28.741659] cfg80211: failed to load regulatory.db [ 28.811574] dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 28.813147] dwmac4: Master AXI performs any burst length [ 28.813175] dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found [ 28.813288] dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 28.813395] dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock [ 28.813422] dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii link mode [ 28.814189] 8021q: adding VLAN 0 to HW filter on device eth0 [ 33.917866] dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 34.063886] NET: Registered protocol family 10 [ 34.064952] Segment Routing with IPv6 [ 38.682841] VDD_RTC: disabling [ 38.682847] VDDIO_SDMMC3_AP: disabling [ 38.683022] VDD_HDMI_1V05: disabling [ 38.683027] VDD_HDMI_5V0: disabling [ 38.683029] VDD_USB0: disabling st 6. 5. 2020 v 16:00 odesílatel Ilia Mirkin <imirkin@xxxxxxxxxxxx> napsal: > > In general it should be possible. If you're having issues, please include dmesg. > > One issue that has come up is that the PCIe controllers on such boards > have very narrow memory windows, not enough to map certain (required) > BARs of NVIDIA GPUs (or other GPUs, I'd expect). This comes up in > dmesg with PCI-related errors. > > Cheers, > > -ilia > > On Wed, May 6, 2020 at 9:53 AM Milan Buška <milan.buska@xxxxxxxxx> wrote: > > > > Hi to all. > > I'm experimenting with running a https://www.zotac.com/us/product/graphics_card/geforce%C2%AE-gt-710-1gb-pcie-x-1 card on an Nvidia Jetson TX2 arm64 device. > > Possible? > > Linux kernel aarch64 5.6.10. > > Because Nvidia did not list drivers for this architecture, I'm experimenting with a nouveau driver. > > The Jetson TX2 has a default driver for the host1x framebuffer for output from the board via HDMI. > > I changed the video kernel parameter to nouveau. Booting the system OK only there is no output on the monitor. > > The device can only be controlled via the serial console. > > Can anyone advise me where to start setting up - (if something needs to be set up) > > > > Greeting > > > > Milan Buška > > > > -- > > > > Remember, no question is too stupid and no problem too small > > -- We've all been beginners > > _______________________________________________ > > Nouveau mailing list > > Nouveau@xxxxxxxxxxxxxxxxxxxxx > > https://lists.freedesktop.org/mailman/listinfo/nouveau -- Remember, no question is too stupid and no problem too small -- We've all been beginners -- Remember, no question is too stupid and no problem too small -- We've all been beginners _______________________________________________ Nouveau mailing list Nouveau@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/nouveau
