Hi to all.
I'm experimenting with running a https://www.zotac.com/us/product/graphics_card/geforce%C2%AE-gt-710-1gb-pcie-x-1 card on an Nvidia Jetson TX2 arm64 device.
Possible?
Linux kernel aarch64 5.6.10.
Because Nvidia did not list drivers for this architecture, I'm experimenting with a nouveau driver.
The Jetson TX2 has a default driver for the host1x framebuffer for output from the board via HDMI.
I changed the video kernel parameter to nouveau. Booting the system OK only there is no output on the monitor.
The device can only be controlled via the serial console.
Can anyone advise me where to start setting up - (if something needs to be set up)
Greeting
Milan Buška
--
Remember, no question is too stupid and no problem too small
-- We've all been beginners
I'm experimenting with running a https://www.zotac.com/us/product/graphics_card/geforce%C2%AE-gt-710-1gb-pcie-x-1 card on an Nvidia Jetson TX2 arm64 device.
Possible?
Linux kernel aarch64 5.6.10.
Because Nvidia did not list drivers for this architecture, I'm experimenting with a nouveau driver.
The Jetson TX2 has a default driver for the host1x framebuffer for output from the board via HDMI.
I changed the video kernel parameter to nouveau. Booting the system OK only there is no output on the monitor.
The device can only be controlled via the serial console.
Can anyone advise me where to start setting up - (if something needs to be set up)
Greeting
Milan Buška
Remember, no question is too stupid and no problem too small
-- We've all been beginners
_______________________________________________ Nouveau mailing list Nouveau@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/nouveau
