On 8/7/21 7:23 AM, Subhashini Rao Beerisetty wrote:
On Sat, Jul 31, 2021 at 11:12 AM Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
On Fri, Jul 30, 2021 at 11:33:09PM +0530, Subhashini Rao Beerisetty wrote:
Hi All,
I'm currently looking for the Embedded USB Debug (EUD) interface driver.
For what specific hardware? Do you have the needed "special" cable? We
have support in the kernel for some types of these cables, what kernel
versions have you tried that did not work for this?
It's for MSM hardware and yes we have the "special" cable.
I could not find the device driver for this in the mainline tree. It
would be helpful if you could point me to the kernel tree which
supports this feature. We will compile this suggested kernel and
necessary drivers and then will give a try on our hardware
Hi,
See USB_SERIAL_DEBUG in drivers/usb/serial/.
That symbol builds usb_debug.c in that same directory.
It may help to read Documentation/x86/earlyprintk.rst.
My own cheat sheet (quick reference) says this: (it may or
may not help you) (it might need some updating for XHCI):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Using USB debug port (on a USB EHCI controller)
On the system under test:
CONFIG_USB_EHCI_HCD=y
kernel command line:
earlyprintk=dbgpN,keep
With an XHCI controller, use:
earlyprintk=xdbcN,keep
Also add:
console=tty0
or console=ttyUSB0
for console output to go to the serial port.
Make sure that USB_SERIAL=y, USB_SERIAL_CONSOLE=y,
and USB_SERIAL_DEBUG=y.
------
On the logging system:
(requires CONFIG_USB_SERIAL_DEBUG=y)
Run minicom and tell it to connect to /dev/ttyUSB#.
Optionally have it log all messages to a file.
#####
--
~Randy
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
