Hello Ahmad, Thanks for the kind reply. I've checked adding a .dts file in the directory and adding it in the Makefile there, and doing "make dts" at the build top does the job. As you said, I think I can just do with this method. Thank you! Best regards, Chan > -----Original Message----- > From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > Sent: Tuesday, February 23, 2021 6:28 PM > To: ckim@xxxxxxxxxx; kernelnewbies@xxxxxxxxxxxxxxxxx > Subject: Re: How to make .dtb from .dts file (how to set include path for > #include .. ?) > > Hello Chan, > > On 23.02.21 09:37, ckim@xxxxxxxxxx wrote: > > I don't know how I should let the preprocessing kick in. > > > > I tried (because there is > > include/dt-bindings/interrupt-controller/arm-gic.h) > > > > $ dtc -i include -I dts -O dtb -o juno.dtb > > arch/arm64/boot/dts/arm/juno.dts > > > > But it doesn't work. > > dtc only handles /include/. #include is expanded by a C preprocessor > that's explicitly run beforehand. Run make V=1 dtbs if you are curious to > see the commands executed. > > > How can I use dtc program to make juno.dtb? > > > > Or if I have to use Makefile, what is the command? > > What reason for doing this by hand? > > Cheers, > Ahmad > > > > > > > > > Thanks, > > > > > > > > Chan Kim > > > > > > > > _______________________________________________ > > Kernelnewbies mailing list > > Kernelnewbies@xxxxxxxxxxxxxxxxx > > https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies > > > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | http://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
