Re: interrupt handler not getting called after resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 3, 2019 at 6:12 AM Pintu Agarwal <pintu.ping@xxxxxxxxx> wrote:
>
> Hi All,
>
> I have one general query.
>
> If an interrupt handler is NOT getting called (for one device) after
> the system resume (from snapshot image), then what could be the issue?

Most likely during resume the interrupt was not enabled. So check
irq status registers to see in the working and non working case.

> Note:
> * The suspend worked perfectly fine.
> * The runtime suspend/resume of the system is also working fine.
>
> If anybody have experienced this situation and fixed it, please let us know.
> It will be a great input for further debugging.

Need more context.
>
> Regards,
> Pintu
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies@xxxxxxxxxxxxxxxxx
> https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies



[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]

  Powered by Linux