Hi, I need one general help in analyzing difference in clock_summary rate before and after the system resume. I am using custom IMX7 board with 4.9 Kernel. With this I am trying to support some functionality during suspend/resume. I am trying to analyze clk_summary from: # cat /sys/kernel/debug/clk/clk_summary I observed that there are difference in "clock rate" after system resume and module install. However the enable/prepare count remains the same. Since I am not much familiar with clock framework, I am looking for some help to analyze this issue. It's an internal issue. May be someone which is familiar with clock analysis or fixed the similar issue earlier can give me some guidance. What does the difference in clock rate indicates? What analysis can be done to narrow down the root cause? Any example of reference could be helpful to understand. Thank You! Regards, Pintu _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
