On Wed, Jun 26, 2019 at 7:44 AM Hariprasad Kelam <hariprasad.kelam@xxxxxxxxx> wrote: > > On Tue, Jun 25, 2019 at 10:26:54PM +0530, Subhashini Rao Beerisetty wrote: > Hi Subhashini, > > Please see inline, > > Hi All, > > > > I’ve two Bluetooth dongles and connected to two Linux > > systems(hostname1, hostname2). I’ve a test executable and it creates a > > BT link does the file transfer and calculates the throughput. > > > Are these dongle supports classic mode or Ble? It supports classic mode. > Which profile are you using to establish connection between these two? ( > PAN, ..etc) > > I repeated the same test with the same BT dongles on another > > different Linux systems(hostname3, hostname4), here I’m getting less > > data rate. > > > After inserting dongles to host are you getting serial interface > /dev/tty* or hci interface ? Using serial interface /dev/tty* > If its hci interface ,you can use hcidump to see packets and check MTU > size > > Here first I want to narrow down whether the issue is below device > > driver level or above device driver level and where the bottleneck is? > > which tools will help me to debug this kind of issue? > > > I think before jumping into driver level ,its better to ensure all > bluetooth parameters are same on both the setups. Except the kernel version(hostname1 & 2 are having same kernel and it differs with hostname3 & 4 kernel version) rest all other stuff is same. So I'd like to know how to know which part of kernel mode functions causing more delay and any tools are there to debug these issues? > > Thanks, > Hariprasad k > > Thanks > > > > _______________________________________________ > > Kernelnewbies mailing list > > Kernelnewbies@xxxxxxxxxxxxxxxxx > > https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
