Hi all,
I'm writing a driver for an ePaper display, that will attach via GPIO.
I've read the docs in Documentation/GPIO, and Documentation/devicetree/bindings/gpio.
The ePaper itself just has a 34pin flat-flex cable, so people will have to use an adapter board to convert to the GPIO headers for a given system.
I'd appreciate advice on the best/canonical way to allow userspace to configure the pinout. I read the devicetree docs, but my interpretation was that was more for a somewhat static configuration to be provided by device vendors.
Many thanks,
Laurence
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
